How much for Flowmaster 40 series - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mountain Man · 07-02-2002, 08:56 PM

Can any of the Canadians on this board give me an idea on where I can buy Flowmaster 40 series mufflers, and how much they are going for in your area. I have received a few quotes, and some of the shops want more than $100 per muffler, including Canadian Tire. This seems way out of whack. Need and idea as to what others have paid.

Thanks

**JIMs70GMC** · 07-03-2002, 05:45 AM

Compare to summit at $73 ea. Do you have to pay shipping to Canada?

*67Fleetsidedream* · 07-03-2002, 07:28 AM

I paid $65 for my 50 series. I bought them off the net. I searched for weeks until I found a good price. Keep looking around. Most muffler shops quote a higher price for 2 reasons. 1. They are trying to make a hell of a profit or 2. they priceing them at a installed price.

Ben

70c10 · 07-03-2002, 08:13 AM

Ebay has tons for about $60.

Low69CST · 07-03-2002, 08:21 AM

I think my 40 series were about 55........some are cheaper.

07-02-2002, 08:56 PM	#1
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	How much for Flowmaster 40 series Can any of the Canadians on this board give me an idea on where I can buy Flowmaster 40 series mufflers, and how much they are going for in your area. I have received a few quotes, and some of the shops want more than $100 per muffler, including Canadian Tire. This seems way out of whack. Need and idea as to what others have paid. Thanks __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

07-03-2002, 05:45 AM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Compare to summit at $73 ea. Do you have to pay shipping to Canada? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-03-2002, 08:13 AM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Ebay has tons for about $60. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

07-03-2002, 08:21 AM	#5
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	I think my 40 series were about 55........some are cheaper. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-03-2002, 07:28 AM	#3
67Fleetsidedream Wiseass secured himself a BAN Join Date: Nov 2000 Location: MOON!!! Posts: 2,282	I paid $65 for my 50 series. I bought them off the net. I searched for weeks until I found a good price. Keep looking around. Most muffler shops quote a higher price for 2 reasons. 1. They are trying to make a hell of a profit or 2. they priceing them at a installed price. Ben



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.