85 1 Ton Chassis,cab Nw Indiana - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Phuloi68** · 12-21-2005, 01:15 AM

Have a 85 chevy 1 ton truck w/title that has been pretty much stripped. Thought I would try to see if anyone can use it for $150.00.
The frame is solid. It has a 4:10 rear end. It was 2 wheel drive.
The cab needs rocker panels and cab corners. Drivers side is worse then passenger side. Floor is pretty solid as are the frame supports. Doors have rust on bottoms. Original seat is gone and someone welded in buckets.
Inside of truck still pretty much intact except for radio.
There is not a lot there but if someone can use it ,it beats going to the crusher.
Located in northwest Indiana

dons454s · 12-21-2005, 01:22 AM

Quote:

Originally Posted by Phuloi68

Have a 85 chevy 1 ton truck w/title that has been pretty much stripped. Thought I would try to see if anyone can use it for $150.00.
The frame is solid. It has a 4:10 rear end. It was 2 wheel drive.
The cab needs rocker panels and cab corners. Drivers side is worse then passenger side. Floor is pretty solid as are the frame supports. Doors have rust on bottoms. Original seat is gone and someone welded in buckets.
Inside of truck still pretty much intact except for radio.
There is not a lot there but if someone can use it ,it beats going to the crusher.
Located in northwest Indiana

If you decide to part it I might be interested in the door panels with the pads and the door seal plates.
Don
dons454s@hotmail.com

**Phuloi68** · 12-21-2005, 01:28 AM

I probably won't part out what is left. At this point, I am trying to make the truck go away. Either by selling it or taking it to the bone yard.

chevykid77 · 12-23-2005, 01:51 PM

i could use just the frame down i have a body and engine for it but if you want it to go as is what is your rock bottom price for me to come get it i am interested you camn p.m me if you would like..also do you have a title for frame???

wibilly · 12-28-2005, 02:28 AM

i need a cab but thats to far away for me

Litdave · 12-28-2005, 11:37 PM

Looking for a 1-ton cab and chassis to use for a light duty dump truck. Can dually wheels be put on this truck and what would it take?

**Phuloi68** · 12-28-2005, 11:41 PM

I don't know what it takes to make it a dually. I think it would have to be a different rear end to do that.

Litdave · 12-28-2005, 11:43 PM

Anybody know about converting from single to dually wheels?

12-21-2005, 01:15 AM	#1
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	85 1 Ton Chassis,cab Nw Indiana Have a 85 chevy 1 ton truck w/title that has been pretty much stripped. Thought I would try to see if anyone can use it for $150.00. The frame is solid. It has a 4:10 rear end. It was 2 wheel drive. The cab needs rocker panels and cab corners. Drivers side is worse then passenger side. Floor is pretty solid as are the frame supports. Doors have rust on bottoms. Original seat is gone and someone welded in buckets. Inside of truck still pretty much intact except for radio. There is not a lot there but if someone can use it ,it beats going to the crusher. Located in northwest Indiana __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know. Last edited by Phuloi68; 06-27-2006 at 02:16 PM.

12-21-2005, 01:28 AM	#3
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	Re: 85 1 Ton Chassis,cab Nw Indiana I probably won't part out what is left. At this point, I am trying to make the truck go away. Either by selling it or taking it to the bone yard. __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know.

12-23-2005, 01:51 PM	#4
chevykid77 Registered User Join Date: Sep 2005 Location: Carpentersville illinois Posts: 34	Re: 85 1 Ton Chassis,cab Nw Indiana i could use just the frame down i have a body and engine for it but if you want it to go as is what is your rock bottom price for me to come get it i am interested you camn p.m me if you would like..also do you have a title for frame???

12-28-2005, 02:28 AM	#5
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: 85 1 Ton Chassis,cab Nw Indiana i need a cab but thats to far away for me __________________ common sense isn't so common anymore

12-28-2005, 11:37 PM	#6
Litdave Registered User Join Date: Feb 2002 Location: Tullahoma, TN Posts: 202	Re: 85 1 Ton Chassis,cab Nw Indiana Looking for a 1-ton cab and chassis to use for a light duty dump truck. Can dually wheels be put on this truck and what would it take? __________________ 71 Factory SWB 4x4 Project 383/350/205 69 LWB 2wd CST Daily Driver ZZ4/700r4/3.73 72 SWB Future Hot Rod

12-28-2005, 11:41 PM	#7
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	Re: 85 1 Ton Chassis,cab Nw Indiana I don't know what it takes to make it a dually. I think it would have to be a different rear end to do that. __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know.

12-28-2005, 11:43 PM	#8
Litdave Registered User Join Date: Feb 2002 Location: Tullahoma, TN Posts: 202	Re: 85 1 Ton Chassis,cab Nw Indiana Anybody know about converting from single to dually wheels? __________________ 71 Factory SWB 4x4 Project 383/350/205 69 LWB 2wd CST Daily Driver ZZ4/700r4/3.73 72 SWB Future Hot Rod

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.