Original GMC 4x4 Hub Caps F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 01-16-2006, 07:22 PM

Believe these are mid 70's to early 80's 1/2 ton 4WD. Two open center and 5 closed center. Not show but nice driver quality. Some minor blemishes and one open cap has a small indention near the lip opening. All 7 caps for $35 plus shipping.

**Ironhorse** · 01-16-2006, 07:24 PM

Closed Caps

**Ironhorse** · 01-21-2006, 05:23 PM

Anyone for $30 plus shipping? Not show but really nice for a stock driver 4x4 with a couple spares.

a28doc · 01-22-2006, 07:25 AM

I think it was dons454 was looking for these awhile back might wanna check with him dont think he found any
Doc

**Ironhorse** · 01-22-2006, 05:05 PM

Thanks Doc, I will PM him and see if he's interested. These aren't show quality but would be really nice for a driver.

dons454s · 01-23-2006, 12:21 AM

Yes
Thanks I do still need a set they are for a 79 dana 60, Do you know the inner diam. of the center holes. They need to fit 16 inch wheels also.
Let me know.
Thanks Don

*hoser* · 01-23-2006, 08:01 AM

I will take them if they will fit 16.5 rims, send me a PM

**Ironhorse** · 01-23-2006, 06:17 PM

dons454s, I don't think these caps will work for you. The opening on the front or open caps is 3 5/8" and measuring on the back side is 10 3/4" across with an inside opening to the wheel area of 10 1/4". As I mentioned in my posting I think these are for a 1/2 Ton 4wd.

hoser, don't think they will work for you either.

I have a trash trailer with 3/4 ton running gear and 16.5 rims, won't mount to the wheel at all. The open cap fits nicely around the front locking hub on my 1/2 ton 4x4. Wish you guys could use them, they are really nice for a driver.

*hoser* · 01-23-2006, 07:09 PM

I just measured the chevy cap I have that will fit it measures 11-3/4" inside thanks ay ways...

dons454s · 01-23-2006, 11:11 PM

Thanks for trying but they wont work they are the smaller style.
Don

**Ironhorse** · 01-27-2006, 07:32 PM

ttt for $30 plus shipping for all 7 caps.

01-16-2006, 07:22 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Original GMC 4x4 Hub Caps F/S Believe these are mid 70's to early 80's 1/2 ton 4WD. Two open center and 5 closed center. Not show but nice driver quality. Some minor blemishes and one open cap has a small indention near the lip opening. All 7 caps for $35 plus shipping. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 11-05-2006 at 06:28 PM.

01-16-2006, 07:24 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Original GMC 4x4 Hub Caps F/S Closed Caps __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 11-05-2006 at 06:28 PM.

01-21-2006, 05:23 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Original GMC 4x4 Hub Caps F/S Anyone for $30 plus shipping? Not show but really nice for a stock driver 4x4 with a couple spares. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-22-2006, 07:25 AM	#4
a28doc '87 V20 4x4 Join Date: Jun 2004 Location: South Western Ohio Posts: 1,073	Re: Original GMC 4x4 Hub Caps F/S I think it was dons454 was looking for these awhile back might wanna check with him dont think he found any Doc __________________ '86 K5 Blazer 4x4 FOR SALE '87 v20 4X4 '99 S10 Blazer 4X4

01-22-2006, 05:05 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Original GMC 4x4 Hub Caps F/S Thanks Doc, I will PM him and see if he's interested. These aren't show quality but would be really nice for a driver. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-23-2006, 12:21 AM	#6
dons454s Registered User Join Date: Nov 2004 Location: Claysburg, Pa Posts: 408	Re: Original GMC 4x4 Hub Caps F/S Yes Thanks I do still need a set they are for a 79 dana 60, Do you know the inner diam. of the center holes. They need to fit 16 inch wheels also. Let me know. Thanks Don

01-23-2006, 08:01 AM	#7
hoser Account Suspended Join Date: Nov 2005 Location: ILLINOIS Posts: 145	Re: Original GMC 4x4 Hub Caps F/S I will take them if they will fit 16.5 rims, send me a PM

01-23-2006, 06:17 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Original GMC 4x4 Hub Caps F/S dons454s, I don't think these caps will work for you. The opening on the front or open caps is 3 5/8" and measuring on the back side is 10 3/4" across with an inside opening to the wheel area of 10 1/4". As I mentioned in my posting I think these are for a 1/2 Ton 4wd. hoser, don't think they will work for you either. I have a trash trailer with 3/4 ton running gear and 16.5 rims, won't mount to the wheel at all. The open cap fits nicely around the front locking hub on my 1/2 ton 4x4. Wish you guys could use them, they are really nice for a driver. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-23-2006, 07:09 PM	#9
hoser Account Suspended Join Date: Nov 2005 Location: ILLINOIS Posts: 145	Re: Original GMC 4x4 Hub Caps F/S I just measured the chevy cap I have that will fit it measures 11-3/4" inside thanks ay ways...

01-23-2006, 11:11 PM	#10
dons454s Registered User Join Date: Nov 2004 Location: Claysburg, Pa Posts: 408	Re: Original GMC 4x4 Hub Caps F/S Thanks for trying but they wont work they are the smaller style. Don

01-27-2006, 07:32 PM	#11
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Original GMC 4x4 Hub Caps F/S ttt for $30 plus shipping for all 7 caps. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.