|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-08-2006, 08:10 PM
|
#1 |
|
Senior Member
Join Date: Jul 2004
Location: Clarks Hill, Indiana
Posts: 733
|
drum 2 disk conversion
OK, so I'm entertaining the idea of taking the disk/drum set up from my wrecked '72-1/2 and installing it on a '68-1/2. the main reason is for the disk brakes up front.
1) Up front, can i just pull everything from the A-arms to the brakes off of the 72, and bolt them up to the '68? 2) If question #1 works, I don't want 5 lug up front & 6 lug out back... So, if both axles are 12-bolts, can I pull the axle shafts out of the '72 and install them in the '68? The '72 is leaf, and the '68 is coil... |
|
|
|
03-08-2006, 08:33 PM
|
#2 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: drum 2 disk conversion
yes, no
|
|
|
|
|
03-08-2006, 09:08 PM
|
#3 |
|
Senior Member
Join Date: Jul 2004
Location: Clarks Hill, Indiana
Posts: 733
|
Re: drum 2 disk conversion
what will cause problems with the rear?
|
|
|
|
|
03-08-2006, 10:06 PM
|
#4 |
|
Registered User
Join Date: Dec 2004
Location: El paso, Tx.
Posts: 428
|
Re: drum 2 disk conversion
The rear 72 axle is 3/4" wider than the 68 i had to fab up some spacer to make every thing line up brake wise.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
