How Rare? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HuggerCST · 03-17-2006, 04:49 PM

How rare is a factory roll bar for blazers? Should I even search, or just build my own?

70rs/ss · 03-17-2006, 04:59 PM

Not rare at all, but shipping will kill you!! After market or custom is the way, cause the factory one was not great (bolts to the wheel well) so there is room for improvement.

HuggerCST · 03-17-2006, 05:07 PM

I'm surprised that they are that common. I just haven't seen alot of them. I have an aftermarket roll bar for a 72 truck, I wonder what I will have to do to make it fit without losing the rear seat. hmmm....

70rs/ss · 03-17-2006, 05:34 PM

Well they didn't come on all of them, but three I have owned have all had them. They mostly have a hoop behind the front seats and down bars that go to the wheel wells or behind them. I have seen them with two hoops one in front behind the front seats and one in the rear. It depends on how you intend to use it, rollbars protect in roll overs, so if wheel it the better rollbar you can get, the safer. I am thinking of buying a harbor freight pipe bender and building my own.

larry may · 03-17-2006, 05:42 PM

Not sure they would fit . Remembering back .Some of the Military (M-1009) Blazer, something like that number may have had roll bar. Not all but some. Look at a govt .auction site. Better bet they were /are stout. just a thought. my.02%

**Gary 70 Jimmy** · 03-17-2006, 05:50 PM

I bought mine for $50.00 but a 5 hour one way trip to pick it up. Just make sure that the person that takes it out doesnt bend it mine was so bent I had to torch off the angled bars and try to reweld them and it still move when I welded it. Back to torching them off again.

bouncytruck · 03-17-2006, 06:00 PM

Wes has one for sale in Olympia WA for $100. www.ClassicHeartbeat.com

**special-K** · 03-17-2006, 11:24 PM

I`ve never seen a CUCV with a roll bar.

vtblazer · 03-18-2006, 07:29 AM

Were there actually "factory" installed roll bars or were they all dealer installed later?
Is there a option code for them? I couldn't find one...

LUV2XCLR8 · 03-18-2006, 08:29 AM

Quote:

Originally Posted by vtblazer

Is there a option code for them? I couldn't find one...

I agree w/ Kurt, I have one, but I have never seen a option code for em

FRENCHBLUE72 · 03-18-2006, 11:31 AM

Hey bouncy where does wes have it listed I looked all over his site but did not see it???

03-17-2006, 04:49 PM	#1
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	How Rare? How rare is a factory roll bar for blazers? Should I even search, or just build my own? __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-17-2006, 04:59 PM	#2
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: How Rare? Not rare at all, but shipping will kill you!! After market or custom is the way, cause the factory one was not great (bolts to the wheel well) so there is room for improvement.

03-17-2006, 05:07 PM	#3
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: How Rare? I'm surprised that they are that common. I just haven't seen alot of them. I have an aftermarket roll bar for a 72 truck, I wonder what I will have to do to make it fit without losing the rear seat. hmmm.... __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 03-17-2006 at 05:08 PM.

03-17-2006, 05:34 PM	#4
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: How Rare? Well they didn't come on all of them, but three I have owned have all had them. They mostly have a hoop behind the front seats and down bars that go to the wheel wells or behind them. I have seen them with two hoops one in front behind the front seats and one in the rear. It depends on how you intend to use it, rollbars protect in roll overs, so if wheel it the better rollbar you can get, the safer. I am thinking of buying a harbor freight pipe bender and building my own.

03-17-2006, 05:42 PM	#5
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: How Rare? Not sure they would fit . Remembering back .Some of the Military (M-1009) Blazer, something like that number may have had roll bar. Not all but some. Look at a govt .auction site. Better bet they were /are stout. just a thought. my.02%

03-17-2006, 05:50 PM	#6
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: How Rare? I bought mine for $50.00 but a 5 hour one way trip to pick it up. Just make sure that the person that takes it out doesnt bend it mine was so bent I had to torch off the angled bars and try to reweld them and it still move when I welded it. Back to torching them off again. Attached Images

03-17-2006, 06:00 PM	#7
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: How Rare? Wes has one for sale in Olympia WA for $100. www.ClassicHeartbeat.com __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-17-2006, 11:24 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: How Rare? I`ve never seen a CUCV with a roll bar. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-18-2006, 07:29 AM	#9
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: How Rare? Were there actually "factory" installed roll bars or were they all dealer installed later? Is there a option code for them? I couldn't find one...

03-18-2006, 11:31 AM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: How Rare? Hey bouncy where does wes have it listed I looked all over his site but did not see it??? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.