|
04-05-2006, 07:55 PM
|
#1 |
|
Registered User
Join Date: Nov 2003
Location: Midland Tx
Posts: 185
|
gear ratio help?
can anyone tell me what gear ration i have by the number stamped on my ring gear in side the rear end here is the number 1235124 15 41 3 82
|
|
|
|
04-05-2006, 09:44 PM
|
#2 |
|
Registered User
Join Date: Mar 2005
Location: 10-Uh-See
Posts: 5,609
|
Re: gear ratio help?
2.73:1
__________________
|
|
|
|
|
04-05-2006, 10:19 PM
|
#3 |
|
Registered User
Join Date: Nov 2003
Location: Midland Tx
Posts: 185
|
Re: gear ratio help?
posi or limtied slip
|
|
|
|
|
04-06-2006, 01:18 AM
|
#4 |
|
Registered User
Join Date: May 2003
Location: Shreveport LA
Posts: 3,170
|
Re: gear ratio help?
The "15 41" is the tooth count of the pinion gear & ring gear, respectively. Divide 41 by 15 & you get 2.73. The "3 82" means it was made in March of 1982.
Look inside the open part of the carrier & see if you see a rod about 5/8" in diameter & 4 intermeshed gears. If that's all you see, it's not posi. If you see 4 or 5 coil springs or an S-shaped flat spring between the two side gears, it's posi. If you see the picture below, it's a Gov-Lock, which is not so good. 
Last edited by jimfulco; 04-06-2006 at 01:19 AM. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
