08-09-2006, 06:09 PM | #1 |
way2lo2
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
|
Blazer C notch
Hello from Ohio, I am currently working on a 2wd 71 Blazer and was wondering if the pre fabbed c notches that I see advertised for pick ups will work on the blazer frames or is there a specific C notch available just for the Blazers. Thanks in advance.
Boris way2lo2@aol.com |
08-09-2006, 07:01 PM | #2 |
SKINNY TIRES RULE!
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
|
Re: Blazer C notch
As far as I know, the pre-fabs will work. The Blazer frame should be the same in that area as the PU frame.
__________________
bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L |
08-09-2006, 08:29 PM | #3 |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: Blazer C notch
Yes it is the same as a 2wd coil spring truck. Here is a link to a write up I did awhile back. It used a bolt in C-notch. This week end I will be doing custom built C-notch on a 2wd blazer that is complete and driving so it will be a bit different.
http://67-72chevytrucks.com/vboard/s...d.php?t=195566 Kevin LFD Inc. |
08-09-2006, 08:30 PM | #4 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Re: Blazer C notch
Most kits out there say they will work w/ either one
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|