Will they fit?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LOHRTBT · 08-30-2006, 12:17 PM

2000 2wd Tahoe Wheels (6 lug) on a 78 4wd K5? 6 lug

b454rat · 08-30-2006, 12:37 PM

Dont' think so, the hub hole is smaller on the NBS, and even if it did, they are waaaaaay offset, and would look really goofy.

LOHRTBT · 08-30-2006, 12:53 PM

well that sux lol. Thanks man! that was the thing I was worried about..the hub hole.

Slonaker · 08-30-2006, 05:53 PM

Quote:

LOHRTBT

Who?

I thought I read here that they would fit, but required some special lug nuts or something. I may be mistaken since I don't actually own anything 6 lug.

Slonaker

cliffsta · 08-30-2006, 08:12 PM

LMAO @ Slone... LOHRTBT is never in the 73-87 forums :P

I've seen the newer wheels (99-02 or w/e) on a truck like ours before. I can't remember who, but someone here had them. Now, dunno if it was 2/4wd though. It has been done, but its more common to see 88-98 wheels on our trucks.

Grande Rojo · 08-30-2006, 08:23 PM

I have a set of 2006 2wd wheels off of my wife new TAHOE 6 LUG.
Plus, I have a 86 4x4 k5 blazer.

Would you like me to try if one will fit for you (cause I'm a nice guy)?

84 400 · 08-30-2006, 08:40 PM

Quote:

Originally Posted by Grande Rojo

I have a set of 2006 2wd wheels off of my wife new TAHOE 6 LUG.
Plus, I have a 86 4x4 k5 blazer.

Would you like me to try if one will fit for you (cause I'm a nice guy)?

thats a very nice offer man. if you do post some pics as i thnk we would all like to see how it looks

1987 Shortwide · 08-30-2006, 10:04 PM

I know low84 had that lifted SWB with hummer wheels on it, I don't know that he had stock axles though.

79Silv4x4 · 08-30-2006, 10:20 PM

Quote:

Originally Posted by LOHRTBT

2000 2wd Tahoe Wheels (6 lug) on a 78 4wd K5? 6 lug

ABSOLUTELY. Drop the rear gate and toss 'em in

. Seriously though, I'm not sure--they could likely be made to fit but would prolly look like a$$ due to the offset. . .

**N2TRUX** · 08-30-2006, 10:24 PM

Quote:

Originally Posted by 1987 Shortwide;

I know low84 had that lifted SWB with hummer wheels on it, I don't know that he had stock axles though.

Hummer wheels are 8 lug so it must have had 3/4 ton axles....

LOHRTBT · 08-31-2006, 12:05 AM

Hey guys... I know I know..long time no see haha!!

WEll I got them sold for my buddy. Another buddy with a 99Z71 bought them. We measured everything up and they will work.

Thanks! Good to hear from you all!

**N2TRUX** · 08-31-2006, 08:31 AM

Hit and run Dave...

LOHRTBT · 08-31-2006, 10:23 AM

lol

84 400 · 08-31-2006, 01:28 PM

man i would love to see what they would look like on our trucks if they can even fit ahhh well

79BIG10 · 08-31-2006, 11:16 PM

Damn Dave I think of you everytime I smoke a brisket. How's things going? I'll be in Turner Falls next month if you're freed up let me know.

LOHRTBT · 09-01-2006, 09:11 AM

Heck yes mang!! Hit me up!! I should be around.

mmmmmm brisket!!

Prerunner1982 · 09-01-2006, 12:39 PM

Dang B I was in Sulphur Oklahoma, camping last weekend. Sucks we couldnt have worked something out and gone on the same weekend... have fun man.

08-30-2006, 12:17 PM	#1
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Will they fit?? 2000 2wd Tahoe Wheels (6 lug) on a 78 4wd K5? 6 lug __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

08-30-2006, 12:37 PM	#2
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: Will they fit?? Dont' think so, the hub hole is smaller on the NBS, and even if it did, they are waaaaaay offset, and would look really goofy. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

08-30-2006, 12:53 PM	#3
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: Will they fit?? well that sux lol. Thanks man! that was the thing I was worried about..the hub hole. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

08-30-2006, 08:12 PM	#5
cliffsta Stepsides RULE Join Date: Jul 2004 Location: Pineville, LA Posts: 1,921	Re: Will they fit?? LMAO @ Slone... LOHRTBT is never in the 73-87 forums :P I've seen the newer wheels (99-02 or w/e) on a truck like ours before. I can't remember who, but someone here had them. Now, dunno if it was 2/4wd though. It has been done, but its more common to see 88-98 wheels on our trucks. __________________ 1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord

08-30-2006, 08:23 PM	#6
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	Re: Will they fit?? I have a set of 2006 2wd wheels off of my wife new TAHOE 6 LUG. Plus, I have a 86 4x4 k5 blazer. Would you like me to try if one will fit for you (cause I'm a nice guy)? __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388

08-30-2006, 10:04 PM	#8
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	Re: Will they fit?? I know low84 had that lifted SWB with hummer wheels on it, I don't know that he had stock axles though. __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.

08-31-2006, 12:05 AM	#11
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: Will they fit?? Hey guys... I know I know..long time no see haha!! WEll I got them sold for my buddy. Another buddy with a 99Z71 bought them. We measured everything up and they will work. Thanks! Good to hear from you all! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

08-31-2006, 08:31 AM	#12
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Will they fit?? Hit and run Dave... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-31-2006, 10:23 AM	#13
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: Will they fit?? lol __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

08-31-2006, 01:28 PM	#14
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: Will they fit?? man i would love to see what they would look like on our trucks if they can even fit ahhh well __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

08-31-2006, 11:16 PM	#15
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Re: Will they fit?? Damn Dave I think of you everytime I smoke a brisket. How's things going? I'll be in Turner Falls next month if you're freed up let me know. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson Last edited by 79BIG10; 08-31-2006 at 11:16 PM.

09-01-2006, 09:11 AM	#16
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: Will they fit?? Heck yes mang!! Hit me up!! I should be around. mmmmmm brisket!! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

09-01-2006, 12:39 PM	#17
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Re: Will they fit?? Dang B I was in Sulphur Oklahoma, camping last weekend. Sucks we couldnt have worked something out and gone on the same weekend... have fun man. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.