New from N. E. GA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

andyt · 11-16-2006, 04:50 PM

Hi everyone,

I just wanted to say HI and show ya'll some pics of my project. Mine is a '72 C-10 with a 4 cyl turbo diesel from a tractor in it. My Dad put the engine in there back in '83 when he worked for Allis Chamlers. He drove it for about several years until the crank broke. Then it sat in the bushes until I was 15 when I pulled the engine, rebuilt it and got it back on the road.It is still a working progress on the body work though. Sitting in the bushes for 8 years did not help it any.

Well anyway, I have enjoyed the site so far and look forward to learning from you guys. Here are a couple of pics of it.

AndyT

andyt · 11-16-2006, 04:53 PM

Here is a few more with engine shots.

andyt · 11-16-2006, 04:56 PM

sorry still learning this system. Here are some bigger pics.

71SWBChevy · 11-16-2006, 05:02 PM

That is pretty neat man! Will it still move along at highway speed or does it run as slow as a tractor?

to the board from KY!

andyt · 11-16-2006, 05:57 PM

The engine only turns about 3200 RPMS so with 4th gear being 1:1 ratio it tops out about 75 mph. My dad have a side load overdrive in it originally, which would it would run over a 100 with. But the diesel was to much torque and I busted it.

AndyT

jsbgump · 11-16-2006, 06:22 PM

Welcome to the board from Texas

**Roland** · 11-16-2006, 09:06 PM

Hey Andy

I worked for Allis Chalmers for a loong long time - Electrical Power Division. I thought many times about putting an A-C diesel in my Chevy back then, but just never did it. I'm new here too and it looks like this is a great site for information.

FRENCHBLUE72 · 11-16-2006, 09:28 PM

welcome to the board from southern oregon..

**Canadian694x4** · 11-16-2006, 11:37 PM

Welcome To The Boards From The Great White North! Sweet Truck!!

Hoods69BadBowTie · 11-17-2006, 12:01 AM

Hey, nice looking project u got going on there. Thats awesome about the diesel swap. Welcome from Montana.

86swb · 11-17-2006, 12:03 AM

Welcome to the board from Western Kentucky.

CAL 58 GMC · 11-17-2006, 01:54 AM

Welcome to the board!

shaneschevys · 11-17-2006, 02:05 AM

Welcome from FT Worth TX.

Pickles · 11-17-2006, 08:21 AM

Welcome from Ky,

Pickles

krue · 11-17-2006, 02:38 PM

Welcome to the board from South Mississippi!

LUV2XCLR8 · 11-17-2006, 05:30 PM

From West TN

**BOSS** · 11-28-2006, 09:59 AM

Welcome to the board from Missouri and thanx for joining up

11-16-2006, 04:50 PM	#1
andyt Registered User Join Date: Nov 2006 Location: Winder, GA Posts: 18	New from N. E. GA Hi everyone, I just wanted to say HI and show ya'll some pics of my project. Mine is a '72 C-10 with a 4 cyl turbo diesel from a tractor in it. My Dad put the engine in there back in '83 when he worked for Allis Chamlers. He drove it for about several years until the crank broke. Then it sat in the bushes until I was 15 when I pulled the engine, rebuilt it and got it back on the road.It is still a working progress on the body work though. Sitting in the bushes for 8 years did not help it any. Well anyway, I have enjoyed the site so far and look forward to learning from you guys. Here are a couple of pics of it. AndyT Attached Images __________________ '72 Custom Deluxe C-10 Allis Chamlers 4 cyl. Turbo Diesel engine, Ford granny low 4 spd. trans. '91 Dodge D250 Cummins Diesel Antique Pulling Tractors: 1956 Allis WD45 Diesel 1960 Allis D17 Diesel 196? Allis D21 Diesel

11-16-2006, 04:53 PM	#2
andyt Registered User Join Date: Nov 2006 Location: Winder, GA Posts: 18	Re: New from N. E. GA Here is a few more with engine shots. Attached Images __________________ '72 Custom Deluxe C-10 Allis Chamlers 4 cyl. Turbo Diesel engine, Ford granny low 4 spd. trans. '91 Dodge D250 Cummins Diesel Antique Pulling Tractors: 1956 Allis WD45 Diesel 1960 Allis D17 Diesel 196? Allis D21 Diesel

11-16-2006, 04:56 PM	#3
andyt Registered User Join Date: Nov 2006 Location: Winder, GA Posts: 18	Re: New from N. E. GA sorry still learning this system. Here are some bigger pics. Attached Images __________________ '72 Custom Deluxe C-10 Allis Chamlers 4 cyl. Turbo Diesel engine, Ford granny low 4 spd. trans. '91 Dodge D250 Cummins Diesel Antique Pulling Tractors: 1956 Allis WD45 Diesel 1960 Allis D17 Diesel 196? Allis D21 Diesel

11-16-2006, 05:02 PM	#4
71SWBChevy Post Whore Join Date: Aug 2005 Location: Owensboro KY Posts: 11,905	Re: New from N. E. GA That is pretty neat man! Will it still move along at highway speed or does it run as slow as a tractor? to the board from KY! __________________ Drew '71 Chevy 350/TH350 Hugger Orange Currently just a rolling frame, body work soon to follow!!! Check out my Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=212927 Daily Driver: 1997 Chevrolet S-10 with more gears than pistons

11-16-2006, 05:57 PM	#5
andyt Registered User Join Date: Nov 2006 Location: Winder, GA Posts: 18	Re: New from N. E. GA The engine only turns about 3200 RPMS so with 4th gear being 1:1 ratio it tops out about 75 mph. My dad have a side load overdrive in it originally, which would it would run over a 100 with. But the diesel was to much torque and I busted it. AndyT __________________ '72 Custom Deluxe C-10 Allis Chamlers 4 cyl. Turbo Diesel engine, Ford granny low 4 spd. trans. '91 Dodge D250 Cummins Diesel Antique Pulling Tractors: 1956 Allis WD45 Diesel 1960 Allis D17 Diesel 196? Allis D21 Diesel

11-16-2006, 06:22 PM	#6
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: New from N. E. GA Welcome to the board from Texas __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

11-16-2006, 09:06 PM	#7
Roland Junior Member Join Date: Nov 2006 Location: Brandon, MS Posts: 134	Re: New from N. E. GA Hey Andy I worked for Allis Chalmers for a loong long time - Electrical Power Division. I thought many times about putting an A-C diesel in my Chevy back then, but just never did it. I'm new here too and it looks like this is a great site for information.

11-16-2006, 09:28 PM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: New from N. E. GA welcome to the board from southern oregon.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-16-2006, 11:37 PM	#9
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: New from N. E. GA Welcome To The Boards From The Great White North! Sweet Truck!! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

11-17-2006, 12:01 AM	#10
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: New from N. E. GA Hey, nice looking project u got going on there. Thats awesome about the diesel swap. Welcome from Montana. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

11-17-2006, 12:03 AM	#11
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: New from N. E. GA Welcome to the board from Western Kentucky. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

11-17-2006, 01:54 AM	#12
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: New from N. E. GA Welcome to the board! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

11-17-2006, 02:05 AM	#13
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: New from N. E. GA Welcome from FT Worth TX. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

11-17-2006, 08:21 AM	#14
Pickles Registered User Join Date: May 2006 Location: Dickson,Tn Posts: 811	Re: New from N. E. GA Welcome from Ky, Pickles

11-17-2006, 02:38 PM	#15
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: New from N. E. GA Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

11-17-2006, 05:30 PM	#16
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: New from N. E. GA From West TN __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-28-2006, 09:59 AM	#17
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: New from N. E. GA Welcome to the board from Missouri and thanx for joining up __________________ Support our site Norwood Survivor

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.