Your 60-66 bagged projects?

[64shortc10]

Lets see everyones pics of works in progress of 60-66 c10's. Trying to get ideas for my 64 shorty! I wanna lay frame on 22's lets see you front and rear setups.

[gostranger]

i have bagged the front of mine but not the back yet i got the bag mounts from suisidedoors.com and airlift 300 psi bags 3''drop spindles and 2 inch drop lower a arms take a look it lays the cross member.

http://groups.msn.com/ROLLNLOW/thec10.msnw

[loztboy]

ya any pics would he a great help gonna try and do this soon

[leftcoast66]

that's w/ the front end layed out, not z'd yet and no notch at all w/ axle laying against the frame, but has the front end laying w/ the crossmember on the ground, and here's what it looks like now, haven't done the upper triangulated 4 link yet so that's why its in the garage, and has a full notch. Still has headers laying on the ground and the full exhaust under the frame in the second pic.

[gostranger]

leftcoast66 i love the truck do you have any better pics of the truck dropped with the back knotch done sorry the last pic is small and dark i am excited to see how much it lays as you can see in my pics the rear on mine isnt done yet so i am just tring to get inspired thanks

[Slammed66]

Heres my bucket goin alot lower SOON

[leftcoast66]

Originally Posted by gostranger

leftcoast66 i love the truck do you have any better pics of the truck dropped with the back knotch done sorry the last pic is small and dark i am excited to see how much it lays as you can see in my pics the rear on mine isnt done yet so i am just tring to get inspired thanks

No pics yet, I'm in college on other side of the state and last time I was home i forgot my camera so that was w/ my dad's crappy digital, so hopefully this weekend I'l get a side pic. I'm waitin on the notch pics since it's not totaly gussetted and looks like crap and doesn't even have the bag mounts in yet.

[BK]

well, this panel was my project.

so now im looking for another one to chop and build the same as that one.
in the mean time, im throwing a stepside on the panel frame. i did this pic with microsoft paint.

[leftcoast66]

that thing is awesome, I'm loving that setup. And I love all the pics of your old panel I saw in another thread a link u had. The setup was awesome. Good luck finding another panel and the truck is gonna be awesome I have no doubt about it.

[Slammed66]

Hey SADPNL

here an old photo shopped pic of my junkpile

might get ya stoked up for a low stepper and its chopped too , Looks SIIIICKK



wheres my sawzall????

[Slammed66]

More

[PrerunnerRob]

Here are a few more...

My other truck...
re-stepping the frame 1
re-stepping the frame 2
re-stepping the frame 3
new ride height, note cig dor comparison

[PrerunnerRob]

A front shot for now

[PrerunnerRob]

Just so you know...
I have less then $1500 into this truck. I bought it for $600, fixed the broken starter switch and it fired right up. i have seen the front dropmember set up, and after looking at how it was made(unbeliveably awesome!!!!)I decided to make my own. I just cant justify spending more then $600 at a time on my truck , and the last purchase was drop spindles and disc brake conversion. If anyone wants to know how I am doing it on a buget, just ask, it is not that difficult, you just have to be very resourceful!

[gostranger]

prerunnerrob do you have some more pics of your truck that thing is sick the look you have is the one i am going for alsoslammed to the max!!!

[Longstep70]

Originally Posted by PrerunnerRob

Just so you know...
I have less then $1500 into this truck. I bought it for $600, fixed the broken starter switch and it fired right up. i have seen the front dropmember set up, and after looking at how it was made(unbeliveably awesome!!!!)I decided to make my own. I just cant justify spending more then $600 at a time on my truck , and the last purchase was drop spindles and disc brake conversion. If anyone wants to know how I am doing it on a buget, just ask, it is not that difficult, you just have to be very resourceful!

I'm liking what youre doing with that truck there Bob and I like to see you're doing cool stuff on a budget. I might well be asking questions before too long...
Which part of SJ you in BTW?

-Andy

[PrerunnerRob]

I live downtown by Taylor and 7th street, and my shop is not too far off. Fell free to ask any questions, I will try to help you as best I can.

[Longstep70]

Originally Posted by PrerunnerRob

I live downtown by Taylor and 7th street, and my shop is not too far off. Fell free to ask any questions, I will try to help you as best I can.

Thanks, I appreciate it. Im down just a little south of capitol and 87.
I am currently "between trucks" as i got rid of my '70 and started looking for, probably a '63 so i've been hanging around on here reading up on stuff. There seem to be a lot of 60-66 guys in SJ.

[slepysal]

Originally Posted by Longstep70

There seem to be a lot of 60-66 guys in SJ.

Aint that the truth I counted 10 60-66's on the way home , and only two were parked!!

[ChiefRocka]

Originally Posted by slepysal

Aint that the truth I counted 10 60-66's on the way home , and only two were parked!!

[desertrat]

I seen this truck at viva but I got the picture off of the OSR forum.

[loztboy]

yall got some great lookin trucks i would love to hear how you doin it on a budget thats the way im gonna have to roll on mine wana get started soon on the dropfigure i should get it done before i start the body work right now i got about 800 bucks to start the bags and notches where is a good place to get bags set up and what do you recomend for size of the bags and compresses and tanks?

[kris's66lwb]

Originally Posted by DroppedChoppedPanel

well, this panel was my project.

so now im looking for another one to chop and build the same as that one.
in the mean time, im throwing a stepside on the panel frame. i did this pic with microsoft paint.

hey dropped chopped panel ive got a a truck in san diego thats a big project in good cont fro chopping and lowering

[19GMC63]

here's a few photochops.... ChoppedDroppedPanel may recognize this photo.

[BK]

19GMC63 - I like that man. i have a new picture of MY truck, all ratty looking, i need to get it on here to see what itd look like.