GMC cab/clip - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblockorange · 03-25-2007, 10:38 PM

This is a 1971 GMC cab and front clip It's a three speed truck with the pedals and shifter hole in the floor. Also a 71 chevy cab they are complete inside and out seat,tank, column ect. Last chance they are going to the scrap yard! don't miss out if you need anythong off these 2 cabs $250 CASH! I do not ship small parts !!!

sorestgore · 03-25-2007, 10:51 PM

cute kid man, too bad i don't have extra cash, i'd pick that up in a second, i NEED a new cab, or at least the floor!

bigblockorange · 03-26-2007, 09:37 AM

Thanks for looking at it. Just to let you know it is complete seat, column,tank the works everything goes with it. BigBlockOrange started out 10x's worse than this cab. I didn't know it was easier to change a dash to A/C then to replace the whole floor. A lesson learned

DMARCUM123 · 03-26-2007, 04:05 PM

what about the bed

1lowdiesel · 03-26-2007, 04:17 PM

yea what about the bed??

bigblockorange · 03-27-2007, 02:09 AM

I still have the sides may let them go too! Might just sell all this stuff, can't find any girls into old Chevy anymore. You can't haul a** if you can't find it!!

bigblockorange · 03-28-2007, 02:00 AM

I have extra parts to go with the cab and clip, front frame rails and a 71 chevy cab you can pull parts off of, it has a good roof.

68caliRat · 03-28-2007, 02:49 AM

Damn I wish you were in CA with that! Shipping would kill me..

DMARCUM123 · 03-28-2007, 08:24 PM

do u have the floor

burban70 · 03-28-2007, 10:07 PM

How long can you hold it before it needs to be picked up?

bigblockorange · 03-29-2007, 02:36 AM

Quote:

Originally Posted by burban70

How long can you hold it before it needs to be picked up?

no hurry I have it until trucks at Carlisle and it will sell, but I like the club and the members if you need it you can come up anytime and get it. No games or jokes I'd keep it if I didn't have 10 other trucks to build. My buddy drove it in Highschool and I bought it just for the floor and frame. I'm looking for a viper, yes a Mopar sorry to say. Anyone know of one for sale?

bigblockorange · 03-29-2007, 02:44 AM

Quote:

Originally Posted by DMARCUM123

do u have the floor

Sorry I used the floor.

1lowdiesel · 03-29-2007, 04:12 PM

so what about the bed. pm if ya want.

bigblockorange · 03-30-2007, 01:11 AM

I bought the truck for the bed floor and frame the rest can go I sold the motor and trans. I drove the truck into the driveway. So if you need the rest let me know I do have the bedsides in the picture with the gate to sell aswell.

bigblockorange · 03-31-2007, 03:05 AM

I have other part to go with the cab and clip. I may sell a frame W/ 5 lug disc brakes

bigblockorange · 04-01-2007, 08:30 AM

good news I have a roof to go with the GMC cab of a 71 chavy The roof on the GMC cab is good if you like sunroofs

bigblockorange · 04-01-2007, 07:37 PM

I'm willing to trade!!!!!!!!!!!!!

bigblockorange · 04-03-2007, 02:45 AM

I picked up the bedsides today, if anyone needs any of these parts let me know. I may start another build soon. I got a line on a 69 GMC tow truck that needs a cab BBO

bigblockorange · 04-04-2007, 02:16 AM

doesn't anyone live near PA into old trucks?

Bowtie001 · 04-04-2007, 12:39 PM

Are you going to part out the front clip? A bunch of parts there sounds nice...

vjthibeault · 04-04-2007, 04:06 PM

sent you a pm thanks

bigblockorange · 04-05-2007, 02:16 AM

I will part the truck out if I have to what do you need?

short step · 04-05-2007, 06:22 AM

where in pa are u? how much for the 71 roof
bob

1lowdiesel · 04-05-2007, 09:12 AM

pm sent too

Bowtie001 · 04-05-2007, 10:15 AM

I'd like a price on both headlight buckets and the side pieces of the grill surround.

Thanks!

03-25-2007, 10:38 PM	#1
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	GMC cab/clip w/chevy cab,frame,bed This is a 1971 GMC cab and front clip It's a three speed truck with the pedals and shifter hole in the floor. Also a 71 chevy cab they are complete inside and out seat,tank, column ect. Last chance they are going to the scrap yard! don't miss out if you need anythong off these 2 cabs $250 CASH! I do not ship small parts !!! Attached Images Last edited by bigblockorange; 10-25-2007 at 06:20 AM. Reason: added parts

03-25-2007, 10:51 PM	#2
sorestgore Official C-10 Destroyer Join Date: Jan 2007 Location: Menomonie, WI Posts: 72	Re: GMC cab/clip cute kid man, too bad i don't have extra cash, i'd pick that up in a second, i NEED a new cab, or at least the floor! __________________ 5 miles to a gallon, and lovin it! Deceased: 1972 C10 Stepside, 350ci smallblock, Edelbrock 750 performer carb, Edelbrock Performer RPM manifold, DynaMax headers, Thrush glasspacks, flame-throwers!

03-26-2007, 09:37 AM	#3
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Thanks for looking at it. Just to let you know it is complete seat, column,tank the works everything goes with it. BigBlockOrange started out 10x's worse than this cab. I didn't know it was easier to change a dash to A/C then to replace the whole floor. A lesson learned

03-26-2007, 04:05 PM	#4
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: GMC cab/clip what about the bed

03-26-2007, 04:17 PM	#5
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: GMC cab/clip yea what about the bed?? __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-27-2007, 02:09 AM	#6
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I still have the sides may let them go too! Might just sell all this stuff, can't find any girls into old Chevy anymore. You can't haul a** if you can't find it!!

03-28-2007, 02:00 AM	#7
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I have extra parts to go with the cab and clip, front frame rails and a 71 chevy cab you can pull parts off of, it has a good roof.

03-28-2007, 02:49 AM	#8
68caliRat Need a bigger hammer.. Join Date: Feb 2007 Location: Escondido,CA. Posts: 280	Re: GMC cab/clip Damn I wish you were in CA with that! Shipping would kill me.. __________________ 1968 GMC 3/4 LWB fleetside Custom Camper 2018 Silverado High Country 2500HD Duramax 4X4

03-28-2007, 08:24 PM	#9
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: GMC cab/clip do u have the floor

03-28-2007, 10:07 PM	#10
burban70 Registered User Join Date: Nov 2005 Location: birmingham, al Posts: 39	Re: GMC cab/clip How long can you hold it before it needs to be picked up?

03-29-2007, 04:12 PM	#13
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: GMC cab/clip so what about the bed. pm if ya want. __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-30-2007, 01:11 AM	#14
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I bought the truck for the bed floor and frame the rest can go I sold the motor and trans. I drove the truck into the driveway. So if you need the rest let me know I do have the bedsides in the picture with the gate to sell aswell.

03-31-2007, 03:05 AM	#15
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I have other part to go with the cab and clip. I may sell a frame W/ 5 lug disc brakes

04-01-2007, 08:30 AM	#16
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip good news I have a roof to go with the GMC cab of a 71 chavy The roof on the GMC cab is good if you like sunroofs

04-01-2007, 07:37 PM	#17
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I'm willing to trade!!!!!!!!!!!!!



Register or Log In To remove these advertisements.

04-03-2007, 02:45 AM	#18
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I picked up the bedsides today, if anyone needs any of these parts let me know. I may start another build soon. I got a line on a 69 GMC tow truck that needs a cab BBO

04-04-2007, 02:16 AM	#19
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip doesn't anyone live near PA into old trucks?

04-04-2007, 12:39 PM	#20
Bowtie001 Project underway - finally. Join Date: Feb 2007 Location: Greenville, SC Posts: 493	Re: GMC cab/clip Are you going to part out the front clip? A bunch of parts there sounds nice... __________________ 1972 GMC Pre-resto... awaiting allocated funding.

04-04-2007, 04:06 PM	#21
vjthibeault NH Join Date: Mar 2005 Location: southern NH Posts: 50	Re: GMC cab/clip sent you a pm thanks

04-05-2007, 02:16 AM	#22
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I will part the truck out if I have to what do you need?

04-05-2007, 06:22 AM	#23
short step Registered User Join Date: Dec 2002 Location: Ludlow,MA Posts: 145	Re: GMC cab/clip where in pa are u? how much for the 71 roof bob

04-05-2007, 09:12 AM	#24
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: GMC cab/clip pm sent too __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

04-05-2007, 10:15 AM	#25
Bowtie001 Project underway - finally. Join Date: Feb 2007 Location: Greenville, SC Posts: 493	Re: GMC cab/clip I'd like a price on both headlight buckets and the side pieces of the grill surround. Thanks! __________________ 1972 GMC Pre-resto... awaiting allocated funding.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.