Goodmark Quality? Very Disappointed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ronh72c10 · 04-09-2007, 01:40 PM

The other day I recieved some Goodmark patch panels for the C10, it was the first time I've bought from them and I have to say I'm really disappointed.

The front pillars are the same cheap ones (generic brand) I bought elsewhere for my suburban, poor fit and aren't even the same shape where they bolt to the front fender. And the driver outer rocker is really bad, I temporarily fit it in place and I couldn't even get the door back on. When I took a close look at the Goodmark rocker and compared it to the Triplus one I had for the passenger side the difference was really obvious, the triplus one had really good definition and crisp bends where the goodmark rocker had really soft bends, ripples along the rear edge and had flashing I had to grind off. When I fit the rocker it really looked awful, totally didn't match the cabcorner and like I said interfered with the front of the door it fit so bad.

Definately avoid Goodmark.

Ron

67ChevyRedneck · 04-09-2007, 02:03 PM

Goodmark sells Tri-Plus parts, redistributed as "goodmark."

**uncle** · 04-09-2007, 03:48 PM

They sell whatever comes from the last shipment or is in stock. Just because it says Goodmark, doesn't mean they manufacture it. I will agree that the Tri Plus parts seem to be better overall.

shifty · 04-09-2007, 05:44 PM

I'm actually really surprised at how much TriPlus has been here at the forums really making a concerted effort to touch base with us on what parts to stamp out. It's also nice to hear feedback on how Goodmark is doing...or not.

I hear their fenders (inner and outer) are supposed to be really nice. Is this not the case anymore? and can't you still get inner fenders and some other parts from the dealership? I realize the stealership doesn't sell patch panels, but ... I think there are some other things out there.

arkracing · 04-09-2007, 09:18 PM

Yeh I agree - most of Goodmark's stuff is just rebaged Tri-Plus.

Your other option is "Tabco"

chevy_632 · 04-09-2007, 09:23 PM

I put a goodmark cowl hood on my truck, to get it fit with perfect seems was a joke had to cut both front fenders drill out spot welds and move them all over the place to look originalthe hood was out by almost a half inch from front to back and i had to add 2 more braces underneath cause it was so flimsy..wouldnt refer goodmark to anyone..but i guess thats what ya get for aftermarket stuff nowadays!!hahaha

ronh72c10 · 04-09-2007, 09:28 PM

Quote:

Originally Posted by 67ChevyRedneck

Goodmark sells Tri-Plus parts, redistributed as "goodmark."

No offense but the rocker I got definitely isn't as good or the same as the TriPlus rocker I already had. Here's some pics that show the difference in the definition of the stamping, goodmark first and TriPlus second.

Ron

cooters · 04-09-2007, 10:16 PM

tabco rockers and cab corners are the best i have found, goodmark is a hit or miss for sure

19673ontree · 04-09-2007, 10:33 PM

I have a tri plus radiator support and it fit perfect , I had two different rocker's like pictured above the tri plus one on my truck driver side looked a lot better , the front fender patch for the front corner was a good looking heavy gauge part but it was a full inch to short I had to cut it in two pieces lengthen it and weld it back together , fit fine after I did that ,

otsenre · 04-09-2007, 10:35 PM

Quote:

Originally Posted by cooters

tabco rockers and cab corners are the best i have found, goodmark is a hit or miss for sure

Where do we find tabco panels?

brak · 04-09-2007, 10:49 PM

I find it odd, that up until today i've never heard anything but rave reviews of goodmark products, and all of a sudden today nobody likes them...

As jerry seinfeld would say, "What's up with that!"

**CMars45000** · 04-09-2007, 11:00 PM

Quote:

Originally Posted by brak

I find it odd, that up until today i've never heard anything but rave reviews of goodmark products, and all of a sudden today nobody likes them...

As jerry seinfeld would say, "What's up with that!"

A lot of the stuff I have purchase from Goodmark in the past has been labeled TriPlus. I have had good luck with Goodmark on my 87 K5...I have not done any metal work on my 71 yet though so we will see what the future holds...

Chris

crazy longhorn · 04-09-2007, 11:02 PM

Quote:

Originally Posted by otsenre

Where do we find tabco panels?

http://www.tabcobodyparts.com/index.html I have not used the panels, so just passing the link on.....

L

04-09-2007, 01:40 PM	#1
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	Goodmark Quality? Very Disappointed The other day I recieved some Goodmark patch panels for the C10, it was the first time I've bought from them and I have to say I'm really disappointed. The front pillars are the same cheap ones (generic brand) I bought elsewhere for my suburban, poor fit and aren't even the same shape where they bolt to the front fender. And the driver outer rocker is really bad, I temporarily fit it in place and I couldn't even get the door back on. When I took a close look at the Goodmark rocker and compared it to the Triplus one I had for the passenger side the difference was really obvious, the triplus one had really good definition and crisp bends where the goodmark rocker had really soft bends, ripples along the rear edge and had flashing I had to grind off. When I fit the rocker it really looked awful, totally didn't match the cabcorner and like I said interfered with the front of the door it fit so bad. Definately avoid Goodmark. Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

04-09-2007, 02:03 PM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Goodmark Quality? Very Disappointed Goodmark sells Tri-Plus parts, redistributed as "goodmark." __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

04-09-2007, 03:48 PM	#3
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,289	Re: Goodmark Quality? Very Disappointed They sell whatever comes from the last shipment or is in stock. Just because it says Goodmark, doesn't mean they manufacture it. I will agree that the Tri Plus parts seem to be better overall.

04-09-2007, 05:44 PM	#4
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Goodmark Quality? Very Disappointed I'm actually really surprised at how much TriPlus has been here at the forums really making a concerted effort to touch base with us on what parts to stamp out. It's also nice to hear feedback on how Goodmark is doing...or not. I hear their fenders (inner and outer) are supposed to be really nice. Is this not the case anymore? and can't you still get inner fenders and some other parts from the dealership? I realize the stealership doesn't sell patch panels, but ... I think there are some other things out there. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-09-2007, 09:18 PM	#5
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: Goodmark Quality? Very Disappointed Yeh I agree - most of Goodmark's stuff is just rebaged Tri-Plus. Your other option is "Tabco" __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

04-09-2007, 09:23 PM	#6
chevy_632 chevy_632 Join Date: Jul 2004 Location: kelowna BC Posts: 104	Re: Goodmark Quality? Very Disappointed I put a goodmark cowl hood on my truck, to get it fit with perfect seems was a joke had to cut both front fenders drill out spot welds and move them all over the place to look originalthe hood was out by almost a half inch from front to back and i had to add 2 more braces underneath cause it was so flimsy..wouldnt refer goodmark to anyone..but i guess thats what ya get for aftermarket stuff nowadays!!hahaha

04-09-2007, 10:16 PM	#8
cooters Senior Member Join Date: Oct 2006 Location: Edmonton Alberta Posts: 458	Re: Goodmark Quality? Very Disappointed tabco rockers and cab corners are the best i have found, goodmark is a hit or miss for sure

04-09-2007, 10:33 PM	#9
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: Goodmark Quality? Very Disappointed I have a tri plus radiator support and it fit perfect , I had two different rocker's like pictured above the tri plus one on my truck driver side looked a lot better , the front fender patch for the front corner was a good looking heavy gauge part but it was a full inch to short I had to cut it in two pieces lengthen it and weld it back together , fit fine after I did that , __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC Last edited by 19673ontree; 04-09-2007 at 10:34 PM.

04-09-2007, 10:49 PM	#11
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Goodmark Quality? Very Disappointed I find it odd, that up until today i've never heard anything but rave reviews of goodmark products, and all of a sudden today nobody likes them... As jerry seinfeld would say, "What's up with that!" __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.