|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
05-22-2007, 12:30 PM
|
#1 |
|
87 Wanna Be K30
Join Date: May 2003
Location: long island, new york
Posts: 218
|
Solid axle camber adjustment...
Correct me if im wrong, but if the tops of my wheel face outwards and wear the outside of the tires, that means i have positive camber... Correct? I have a dana 60 in the front of my truck and i have replaced EVERYTHING on it so far. its basically brand new. but now i need to figure out how to adjust the camber on it. its eating my tires alive. Is there some sort of shim that goes behind the spindle or something? and if it is a shim... where does it go and how do i get the right one?
Thanks alot guys -Scott
__________________
Was: 1987 V10 Silverado TBI 350/700R4/208 with 3.42 gears Is: A wanna be K30 330hp 350/465/205/D60/14FF with 3.73 hydroboost, 4 Core radiator, electric fans, Centerforce Duel Friction, Locker, 6inch Soft ride lift, etc.... |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode