|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-03-2007, 02:15 AM
|
#1 |
|
Registered User
Join Date: Mar 2005
Location: Lake Dallas, TX
Posts: 26
|
66 Chevy Vortec V8 5 Spd Buildup
New to the board and wanted to share my 66 project.
66 Chevy Truck Fleetside longbed, small window, 98 Chevy Brakes and spindles (still 6 Lug) on the front. Just took out the factory 3 speed and carb 350. Working on getting the Vortec 350 with NV4500 5 speed transmission in. i have both motors out just need to get the vortec in. Hopefully I will get it running this weekend. Here are a few pics Out with the old.  In with the new.  I am also going to install a 14bolt semi-floating rear end and the factory gas tank from the 98 as well as the factory a/c. Debating on getting a hypertec programmer or spending the money for EFI Live or not. Any sugesstions? I also have a full set of autometer gauges for the dash along with the billet aluminum gauge cluster. I will post more pics soon. I am welcome to any suggestions. THanks! |
|
|
|
08-03-2007, 02:42 AM
|
#2 |
|
Registered User
Join Date: Dec 2006
Location: Cleveland, Tx
Posts: 1,619
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
very very nice. i like. any chance we could see some full truck and inside pics? i live in lake worth, TX. good luck and keep up the good work.
John
__________________
Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect. Last edited by hewlett2002000; 08-03-2007 at 06:28 AM. |
|
|
|
|
08-03-2007, 02:44 AM
|
#3 |
|
Registered User
Join Date: Mar 2005
Location: Lake Dallas, TX
Posts: 26
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
I will post them up. Its ugly though. Edited by Moderator My shop is in Lewisville.
Last edited by krue; 08-03-2007 at 05:09 AM. |
|
|
|
|
08-03-2007, 02:57 AM
|
#4 |
|
Registered User
Join Date: Mar 2005
Location: Lake Dallas, TX
Posts: 26
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
Drivers Side, Just installed 98 Chevy Truck 60/40 Seats.
 Pass Side 
|
|
|
|
|
08-03-2007, 03:12 AM
|
#5 |
|
Registered User
Join Date: Dec 2006
Location: Cleveland, Tx
Posts: 1,619
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
good lookin ol truck. mine looks about the same. mines parked for a while though. im fixin some stuff up to get it more drivable and safe.
John
__________________
Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect. Last edited by hewlett2002000; 08-03-2007 at 06:30 AM. |
|
|
|
|
08-03-2007, 03:13 AM
|
#6 |
|
Registered User
Join Date: Dec 2006
Location: Cleveland, Tx
Posts: 1,619
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
o and btw i might have to get me a seat like that, i like the way it looks in there.
__________________
Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect. |
|
|
|
|
08-03-2007, 03:35 AM
|
#7 |
|
Registered User
Join Date: Dec 2006
Location: Cleveland, Tx
Posts: 1,619
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
all i have are when it was still on the truck. ill take closer ones tomorrow.
__________________
Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect. |
|
|
|
|
08-03-2007, 05:11 AM
|
#8 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
Welcome to the board! Been thinking about the vortec swap myself. However no buying/selling/trading allowed unless your a Subscribed member and then only on the parts board. For info on subscribing click the "support the board" link in my sig.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
08-03-2007, 09:09 AM
|
#9 |
|
Registered User
Join Date: Aug 2005
Location: Centennial Hills Nevada
Posts: 58
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
Nice seats. Just curious what is that trans out of?
|
|
|
|
|
08-03-2007, 09:12 AM
|
#10 |
|
Justified!
Join Date: Apr 2007
Location: Valencia, Ca
Posts: 1,366
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
Will the fuel tank fit easily under the bed? Is that where you are going to put it?
Nice looking project you have going.....
__________________
Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny 
|
|
|
|
|
08-03-2007, 11:01 AM
|
#11 |
|
Registered User
Join Date: Mar 2005
Location: Lake Dallas, TX
Posts: 26
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
The transmission is from a 98 2500 chevy truck.
The gas tank fits in width. however, it is too long. I might chop off the end of it. Don't know just yet. |
|
|
|
|
08-03-2007, 06:27 PM
|
#12 |
|
Registered User
Join Date: Aug 2003
Location: tool box
Posts: 3,115
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
12volt - I'd like more info on those brakes... if you have the time.
-W |
|
|
|
|
08-03-2007, 09:19 PM
|
#13 |
|
Registered User
Join Date: Mar 2005
Location: Lake Dallas, TX
Posts: 26
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
On the brakes I took the entire spindle, hub, rotor assembly and used the factory 66 lower ball joint on the factory 66 lower control arm. I had to use the upper ball joint for the upper control arm from the 98 Van. However, the spindle is about 1 inch taller than the factory 66 and the camber is way off. Therefore, you must either build a custom upper control are or a custom lower control arm and adjust the length about 1" Right now I just have the factory arms on until i get the motor in then I will build custom arms. Basically I am using the design off the StrongArms that are used for air bag systems. I will have my upper arms adjustable via threaded rod and right hand threaded heim joint. I am doing the extra work because I think the brakes of the newer trucks are a whole lot better then the 72-88. They are 6 lug too!
|
|
|
|
|
08-04-2007, 04:04 AM
|
#14 | |
|
and a few others
Join Date: Jun 2007
Location: Blue Ridge Mountains of VA
Posts: 5,638
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
Quote:
__________________
Bill  US Army Vet -193rd InfantryBlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi |
|
|
|
|
|
08-05-2007, 12:43 AM
|
#15 |
|
Registered User
Join Date: Mar 2005
Location: Lake Dallas, TX
Posts: 26
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
The seat height is no worse than stock.
|
|
|
|
|
08-05-2007, 08:28 AM
|
#16 |
|
New Member
 
Join Date: Mar 2007
Location: Houston,TX
Posts: 261
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
Looking good
__________________
Anthony 63 chevy stepside SWB 57 chevy 2dr hrdtop belair |
|
|
|
|
08-07-2007, 04:17 PM
|
#17 |
|
Registered User
Join Date: Mar 2005
Location: Lake Dallas, TX
Posts: 26
|
Re: 66 Chevy Vortec V8 5 Spd Buildup
More pics
 old motor  new motor  
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
