My new shoes just arrived - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jasonb72 · 08-10-2007, 09:29 PM

20x10 Bondspeed Quicksilver's 4"BS 295 40 ZR20's,

I wish the tires were a bit wider, I should have gone with the 305's or 315's but it was hard enough to find a matching pair to go with the 18's I am putting up front.

Jcentsr6 · 08-10-2007, 09:55 PM

nice...Can I get a side pic of tire and wheel?? I am waiting for my new shoes to arrive as we speak. (I ordered 295/45/20 rear tires...want to get an idea of how the tire looks) Thanks.

The wheels look great by the way....can we also see a pic of the truck they are going on ?

jasonb72 · 08-10-2007, 10:18 PM

Quote:

Originally Posted by Jcentsr6

nice...Can I get a side pic of tire and wheel?? I am waiting for my new shoes to arrive as we speak. (I ordered 295/45/20 rear tires...want to get an idea of how the tire looks) Thanks.

The wheels look great by the way....can we also see a pic of the truck they are going on ?

I will try and get that pick tommorrow. I bagged them back up. Right now the truck is being built frame up and I am still working on the chassis. Here are a few picks so far. I am changing from the springs to bags to lower it more. The truck is a 72 cheyenne fleetside LB

snacob14 · 08-10-2007, 10:36 PM

is that paint or powder

jasonb72 · 08-10-2007, 10:56 PM

Quote:

Originally Posted by snacob14

is that paint or powder

Silver metalic powder.. When it is in the sun the flakes really pop out.

*culookn* · 08-10-2007, 11:15 PM

sweet wheels

royo · 08-11-2007, 02:06 AM

Nice truck what happens if the small bolts holding the upper ball joint break??? why are the ball jionts bolted to the bottom

jasonb72 · 08-11-2007, 07:42 AM

Quote:

Originally Posted by royo

Nice truck what happens if the small bolts holding the upper ball joint break??? why are the ball jionts bolted to the bottom

There are two plates sandwhiched togeher that holds the ball joints in. Other than that all I can say is that is the way CPP makes them.

72 Cheyenne402 · 08-11-2007, 10:00 AM

very cool!!!!!!

royo · 08-11-2007, 01:38 PM

Quote:

Originally Posted by jasonb72

There are two plates sandwhiched togeher that holds the ball joints in. Other than that all I can say is that is the way CPP makes them.

well at least i know that i didnt get a one off pair because mine are the same way and those are some nice wheels

72 Cheyenne402 · 08-11-2007, 02:29 PM

18 & 20" is a good look for these trucks IMO

mlane65 · 08-11-2007, 09:28 PM

Nice wheels ! how much did it cost for the powder coat /and sandblasting?
Just curious because i'm getting close to doing mine Thanks

jasonb72 · 08-11-2007, 11:55 PM

Quote:

Originally Posted by mlane65

Nice wheels ! how much did it cost for the powder coat /and sandblasting?
Just curious because i'm getting close to doing mine Thanks

I am around $700 right now, but the powder I am using cost $100 extra. Normal frame with normal black or non metalic powder with blasting should be around $425, at least where I am at.

L0WRIDE · 08-12-2007, 04:52 AM

nice dude!!!!

crzngmychvy · 08-12-2007, 04:00 PM

Cool...

I have the huntingtons on mine.

knightlife · 08-16-2007, 05:44 AM

very sessay rims...

1sik7t2 · 08-24-2007, 06:28 PM

Nice Job Man Love All The Bonspeed Wheels Billets The Best I Went Ol School With The Coddington Shysters 22's & 20's Hotrod Look Keep (down) The Good Work Lol

08-10-2007, 09:29 PM	#1
jasonb72 PorterBuilt Man Crush Join Date: Jul 2007 Location: Allen, tx Posts: 291	My new shoes just arrived 20x10 Bondspeed Quicksilver's 4"BS 295 40 ZR20's, I wish the tires were a bit wider, I should have gone with the 305's or 315's but it was hard enough to find a matching pair to go with the 18's I am putting up front. Attached Images __________________ The 72 will live again

08-10-2007, 09:55 PM	#2
Jcentsr6 Junior Member Join Date: Jul 2007 Location: Odenton, Md Posts: 552	Re: My new shoes just arrived nice...Can I get a side pic of tire and wheel?? I am waiting for my new shoes to arrive as we speak. (I ordered 295/45/20 rear tires...want to get an idea of how the tire looks) Thanks. The wheels look great by the way....can we also see a pic of the truck they are going on ? __________________ going to sell this one...looking for a SWB project next.

08-10-2007, 10:36 PM	#4
snacob14 Registered User Join Date: Oct 2006 Location: Desoto, MO Posts: 225	Re: My new shoes just arrived is that paint or powder

08-10-2007, 11:15 PM	#6
culookn Account Suspended Join Date: Jun 2006 Location: nj Posts: 194	Re: My new shoes just arrived sweet wheels

08-11-2007, 02:06 AM	#7
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: My new shoes just arrived Nice truck what happens if the small bolts holding the upper ball joint break??? why are the ball jionts bolted to the bottom __________________ nickle and dime

08-11-2007, 10:00 AM	#9
72 Cheyenne402 Registered User Join Date: Feb 2005 Location: Texas Posts: 581	Re: My new shoes just arrived very cool!!!!!! __________________ 1972 Cheyenne 402 LWB 2005 Silverado X-Cab 5.3L 2004 John Deere L120 20HP B&S

08-11-2007, 02:29 PM	#11
72 Cheyenne402 Registered User Join Date: Feb 2005 Location: Texas Posts: 581	Re: My new shoes just arrived 18 & 20" is a good look for these trucks IMO __________________ 1972 Cheyenne 402 LWB 2005 Silverado X-Cab 5.3L 2004 John Deere L120 20HP B&S

08-11-2007, 09:28 PM	#12
mlane65 Registered User Join Date: Jul 2007 Location: DANVILLE IL. Posts: 8	Re: My new shoes just arrived Nice wheels ! how much did it cost for the powder coat /and sandblasting? Just curious because i'm getting close to doing mine Thanks

08-12-2007, 04:52 AM	#14
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: My new shoes just arrived nice dude!!!! __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

08-12-2007, 04:00 PM	#15
crzngmychvy "1972 C5" Join Date: Jul 2004 Location: SoCal Posts: 729	Re: My new shoes just arrived Cool... I have the huntingtons on mine. __________________ - 72 2wd Blazer ...sold... 2wd Blazer Page

08-16-2007, 05:44 AM	#16
knightlife Dark Heart Motorsports Join Date: Apr 2007 Location: 29404 DKFX Posts: 683	Re: My new shoes just arrived very sessay rims... __________________ How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD!

08-24-2007, 06:28 PM	#17
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: My new shoes just arrived Nice Job Man Love All The Bonspeed Wheels Billets The Best I Went Ol School With The Coddington Shysters 22's & 20's Hotrod Look Keep (down) The Good Work Lol __________________ check out my build "DIRTY BURB"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.