|
11-05-2007, 06:29 PM
|
#1 |
|
Registered User
Join Date: Jul 2007
Location: Toronto, On
Posts: 65
|
Master Cylinder
So I took apart, cleaned up, remounted and filled the MC.
I did not bench bleed it. I did not hook up the outlets. They are open. When I press the brake pedal nothing comes out. Shouldn't brake fluid spurt from the outlet holes? 
|
|
|
|
11-05-2007, 06:35 PM
|
#2 |
|
Senior Member
Join Date: Nov 2004
Location: Vacaville, CA
Posts: 2,272
|
Re: Master Cylinder
Sounds like the master is clogged up with probably rust. Get a new one, the last one that I bought was 15.00 at the parts store.
|
|
|
|
|
11-05-2007, 06:57 PM
|
#3 |
|
never finish start another
Join Date: Mar 2007
Location: North Platte Nebraska
Posts: 432
|
Re: Master Cylinder
You have to plug or seal the outlet on the back stroke to bleed the MC
|
|
|
|
|
11-05-2007, 07:21 PM
|
#4 |
|
Registered User
Join Date: Jul 2007
Location: Toronto, On
Posts: 65
|
Re: Master Cylinder
nplocoman.
BINGO. Thanks. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
