engine hone for a 402 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ofnaman · 12-27-2007, 07:39 PM

Anyone know where I can get a cylinder ball hone for a 402 (stores or brand name of hone)? I have a 3 stone hone, but I prefer a ball hone. I know I can get one off of a tool truck, but they are too pricey for a single engine build. Thank you.

**truckdude239** · 12-28-2007, 02:33 AM

umm advance auto parts

ofnaman · 12-28-2007, 04:33 PM

Quote:

Originally Posted by truckdude239

umm advance auto parts

no advance auto parts in or near reno. but, thanks

bhunt31 · 12-28-2007, 04:56 PM

Quote:

Originally Posted by ofnaman

no advance auto parts in or near reno. but, thanks

The best I could find for ya was Napa Auto and it's about $140 there. Bottle-Brush hones are high. Is there a specific reason you want a bottle-brush over a 3 stone?

qksilver · 12-28-2007, 05:44 PM

The last one I bought was a K-D and it was $32, last year

ofnaman · 12-29-2007, 05:33 AM

Quote:

Originally Posted by bhunt31

The best I could find for ya was Napa Auto and it's about $140 there. Bottle-Brush hones are high. Is there a specific reason you want a bottle-brush over a 3 stone?

I like the finish of a bottle brush better, plus they are a little easier to use. I have some for smaller engines but when I moved to reno I left my big one at my buddy's back in St. Louis, so I am looking for an inexpensive one. I checked summit racing, but cannot find one there. I will check napa today, and maybe even try harbor freight. thanks

bhunt31 · 12-29-2007, 05:41 AM

Quote:

Originally Posted by ofnaman

I like the finish of a bottle brush better, plus they are a little easier to use. I have some for smaller engines but when I moved to reno I left my big one at my buddy's back in St. Louis, so I am looking for an inexpensive one. I checked summit racing, but cannot find one there. I will check napa today, and maybe even try harbor freight. thanks

k, just wondering. I looked at Harbor Freight and couldn't find a thing.

12-27-2007, 07:39 PM	#1
ofnaman Registered User Join Date: Aug 2007 Location: reno Posts: 397	engine hone for a 402 Anyone know where I can get a cylinder ball hone for a 402 (stores or brand name of hone)? I have a 3 stone hone, but I prefer a ball hone. I know I can get one off of a tool truck, but they are too pricey for a single engine build. Thank you. __________________ A sweet 2000 Deville.....

12-28-2007, 02:33 AM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: engine hone for a 402 umm advance auto parts __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-28-2007, 05:44 PM	#5
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: engine hone for a 402 The last one I bought was a K-D and it was $32, last year

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.