Blazer Windshield frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cookie · 01-10-2008, 02:32 PM

Hey everyone hows it going i have a dumb question i finished my blazer not to long ago and ive been driving it. Well my blazers really rough and everytime i hit a bump the top moves a little bit well off hand were the top bolts into the windshield frame the nuts on the inside of the frame sheared off i guess. I'm not sure but i cant take the drivers side screw out and im wondering if everyones else top moves around i have all the bolts in and all the weather stripping it still moves around up front its wore all the paint off by the brackets

LUV2XCLR8 · 01-10-2008, 02:35 PM

Sounds like your body mounts could also be bad allowing everything to flex.

Cookie · 01-10-2008, 10:14 PM

Quote:

Originally Posted by LUV2XCLR8

Sounds like your body mounts could also be bad allowing everything to flex.

could be cause i went out in the country to play a little yesterday and it sounds like the whole vehicle flexes but the topper actually moves around alot more than the rest of it

Chevyman63 · 01-11-2008, 01:33 AM

Quote:

Originally Posted by LUV2XCLR8

Sounds like your body mounts could also be bad allowing everything to flex.

Could also be torsion box or cab support problems if you have rust down there.

vtblazer · 01-11-2008, 02:40 AM

Are you bolted up front with all FOUR mounting spots?

Two through the visor mounts.
Two directly into the windshield frame via the inner metal mounts.

Cookie · 01-11-2008, 01:49 PM

Quote:

Originally Posted by vtblazer

Are you bolted up front with all FOUR mounting spots?

Two through the visor mounts.
Two directly into the windshield frame via the inner metal mounts.

i only have the two in the middle i dont have the sunvisor/sunvisor brakets in im still lacking alot of stuff but since the middle screws are loose in the frame i suppose the sunisor brakets would help

01-10-2008, 02:32 PM	#1
Cookie Registered User Join Date: Nov 2007 Location: Dickinson North dakota Posts: 66	Blazer Windshield frame Hey everyone hows it going i have a dumb question i finished my blazer not to long ago and ive been driving it. Well my blazers really rough and everytime i hit a bump the top moves a little bit well off hand were the top bolts into the windshield frame the nuts on the inside of the frame sheared off i guess. I'm not sure but i cant take the drivers side screw out and im wondering if everyones else top moves around i have all the bolts in and all the weather stripping it still moves around up front its wore all the paint off by the brackets __________________ http://i60.photobucket.com/albums/h3...101/img110.jpgMy 98 Trans Am Ls1 6speed trans am's new motorhttp://i60.photobucket.com/albums/h3/jeath101/067.jpg http://i60.photobucket.com/albums/h3/jeath101/018.jpg 1986 gmc jimmy 350/sm465 with 33's 1983 Chevrolet K20 SM465 6.2 diesel with 305,000 miles,gm8 turbo, 4:11s and 14ff

01-10-2008, 02:35 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Blazer Windshield frame Sounds like your body mounts could also be bad allowing everything to flex. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 01-10-2008 at 02:35 PM.

01-11-2008, 02:40 AM	#5
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Blazer Windshield frame Are you bolted up front with all FOUR mounting spots? Two through the visor mounts. Two directly into the windshield frame via the inner metal mounts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.