|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-16-2008, 03:53 PM
|
#1 |
|
Senior Member
 
Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,886
|
WTB Plug-wire stock routing clips etc.
Hi,not a huge order here but I need to replace the original clips/looms or whatever is used for the stock,under-the-manifold routing for the spark wires (since the guy that replaced my motor so fit to throw these items away).I am running 8 mm wires now. Thanks-Brian
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. Last edited by WorkinLonghorn; 01-16-2008 at 03:54 PM. |
|
|
|
01-17-2008, 03:56 PM
|
#2 |
|
Senior Member
Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,886
|
Re: WTB Plug-wire stock routing clips etc.
Before everybody jumps in here all at once, here's a picture of a stock clip used to route the wires along the block,under the manifold.
I need (I guess) three more of these plus any seperators or whatever that were used from the distrib on down.  Thanks,Brian
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
