|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-13-2008, 06:46 AM
|
#1 |
|
Registered User
Join Date: Oct 2007
Location: Santa Clarita, CA
Posts: 581
|
Question RE: Front crossmember bolts
1) Can I use the lower threaded holes to bolt-up my front cross member? I am notching the member 1 or 1 1/2 inches.
2) Should I bolt it from the bottom also?
__________________
Blazer Project |
|
|
|
04-13-2008, 08:24 AM
|
#2 |
|
Too many projects
Join Date: Mar 2004
Location: Fargo, ND land of the flat hills
Posts: 1,147
|
Re: Question RE: Front crossmember bolts
Yes, those threaded inserts originally had bolts through them, so I would use those and the bottom bolts. This is how mine is secured with new grade 8 hardware. (5 grade 8's should hold her steady)
__________________
Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" |
|
|
|
|
04-13-2008, 02:49 PM
|
#3 |
|
Senior Member
Join Date: May 2004
Location: johnstown, NY
Posts: 2,393
|
Re: Question RE: Front crossmember bolts
yes to both questions.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
