WTB; Fleetside wood bed side angles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rlm316 · 05-21-2008, 09:10 PM

If any one has a 8' wood bed with dented up bedsides, I need the angle strips that are bent from the inner bedside. This is the area that the wood bed bolts to from the tailgate to the front bed panel on each side. I would like to have about 2" above the bend so I can do a clean weld. Partial pieces could be used in a pinch. Let me know what you have and your asking price. Thanks for the help, Lane.

rlm316 · 05-22-2008, 07:37 PM

ttt

rlm316 · 05-24-2008, 12:47 PM

Any help?

tommypic · 05-24-2008, 01:34 PM

you can order them new http://www.lmctruck.com/ICATALOG/CB/full.aspx?Page=31

Sammy · 05-24-2008, 03:33 PM

Also MAR-K. They are quick @ shipping.

rlm316 · 05-24-2008, 04:53 PM

Those are for the stepside. I talked to Mar-K about it and the fleetside patches are not available so I need used parts. They don't need to be pretty, just not too rusty. Any help? I need these to finish my bed.

I think that the bedsides for the steel floor are the same as the wood floor so the flange area should be the same.

**uncle** · 05-24-2008, 05:37 PM

I think it would be easier to just get a piece of metal cut and broke. Same gauge of course.

OhioDan · 05-25-2008, 12:28 PM

I got a set for my fleetside from Horkies in Minn. Can't remember the cost right now.(cheap) Great folks to deal with. Someone here has their web address. Check them out. (Not at home. On the road, using a laptop.) Oh yea, they're already pre-drilled.

rlm316 · 05-29-2008, 04:50 PM

Thanks, I'll check it out. TTT for anyone else?

sameyrasmea72 · 05-29-2008, 06:14 PM

Are you talking about this area right here?

OhioDan · 05-30-2008, 05:09 AM

That would be the ones. You'll have to measure so the lip will be at the same from the top of the box down to the lip. Cut off the old and weld on the new. Smooth as needed. Saves buying a bedside.

Found their website:
http://www.horkeyswoodandparts.com/index.html

Hope this helps?

msgross · 05-31-2008, 11:45 PM

wow, I didn't know they made those... good find, im saving this one...

I need that area and the part that the wheel well bolts too...

otsenre · 06-01-2008, 12:08 AM

I have a pair of bedsides (nice shape) off a 68 I will give you if you can find a way to get them to you

68C15 · 06-02-2008, 08:16 AM

if ostenre doesnt work out I just took off by long fleet. the outter skins are toat (custom built in bungee hook holes) but the inners are in real good shape. LMK soon as this next weekend it needs to be gone

rlm316 · 06-02-2008, 10:57 AM

Thanks for all the replies! I would imagine that shipping would be high for the full bedsides. Who would deal with these besides a trucking freight co.? I'm trying to keep the costs down as much as possible on this build ( 2kids, 2 jobs and 1 wife that can spend like 10, haha) Thanks again, Lane

05-21-2008, 09:10 PM	#1
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	WTB; Fleetside wood bed side angles If any one has a 8' wood bed with dented up bedsides, I need the angle strips that are bent from the inner bedside. This is the area that the wood bed bolts to from the tailgate to the front bed panel on each side. I would like to have about 2" above the bend so I can do a clean weld. Partial pieces could be used in a pinch. Let me know what you have and your asking price. Thanks for the help, Lane. Last edited by rlm316; 05-24-2008 at 05:03 PM.

05-22-2008, 07:37 PM	#2
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB; Fleetside wood bed side angles ttt

05-24-2008, 12:47 PM	#3
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB; Fleetside wood bed side angles Any help?

05-24-2008, 01:34 PM	#4
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: WTB; Fleetside wood bed side angles you can order them new http://www.lmctruck.com/ICATALOG/CB/full.aspx?Page=31 __________________ My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2

05-24-2008, 03:33 PM	#5
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: WTB; Fleetside wood bed side angles Also MAR-K. They are quick @ shipping. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

05-24-2008, 04:53 PM	#6
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB; Fleetside wood bed side angles Those are for the stepside. I talked to Mar-K about it and the fleetside patches are not available so I need used parts. They don't need to be pretty, just not too rusty. Any help? I need these to finish my bed. I think that the bedsides for the steel floor are the same as the wood floor so the flange area should be the same. Last edited by rlm316; 05-24-2008 at 05:02 PM. Reason: additional info

05-24-2008, 05:37 PM	#7
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: WTB; Fleetside wood bed side angles I think it would be easier to just get a piece of metal cut and broke. Same gauge of course.

05-25-2008, 12:28 PM	#8
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Re: WTB; Fleetside wood bed side angles I got a set for my fleetside from Horkies in Minn. Can't remember the cost right now.(cheap) Great folks to deal with. Someone here has their web address. Check them out. (Not at home. On the road, using a laptop.) Oh yea, they're already pre-drilled. __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started. Last edited by OhioDan; 05-30-2008 at 05:14 AM.

05-29-2008, 04:50 PM	#9
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB; Fleetside wood bed side angles Thanks, I'll check it out. TTT for anyone else?

05-29-2008, 06:14 PM	#10
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: WTB; Fleetside wood bed side angles Are you talking about this area right here? Attached Images __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

05-30-2008, 05:09 AM	#11
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Re: WTB; Fleetside wood bed side angles That would be the ones. You'll have to measure so the lip will be at the same from the top of the box down to the lip. Cut off the old and weld on the new. Smooth as needed. Saves buying a bedside. Found their website: http://www.horkeyswoodandparts.com/index.html Hope this helps? __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started. Last edited by OhioDan; 05-30-2008 at 05:13 AM.

05-31-2008, 11:45 PM	#12
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WTB; Fleetside wood bed side angles wow, I didn't know they made those... good find, im saving this one... I need that area and the part that the wheel well bolts too... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

06-01-2008, 12:08 AM	#13
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: WTB; Fleetside wood bed side angles I have a pair of bedsides (nice shape) off a 68 I will give you if you can find a way to get them to you

06-02-2008, 08:16 AM	#14
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: WTB; Fleetside wood bed side angles if ostenre doesnt work out I just took off by long fleet. the outter skins are toat (custom built in bungee hook holes) but the inners are in real good shape. LMK soon as this next weekend it needs to be gone

06-02-2008, 10:57 AM	#15
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB; Fleetside wood bed side angles Thanks for all the replies! I would imagine that shipping would be high for the full bedsides. Who would deal with these besides a trucking freight co.? I'm trying to keep the costs down as much as possible on this build ( 2kids, 2 jobs and 1 wife that can spend like 10, haha) Thanks again, Lane



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.