1983 chevy k10

[biggfrank99]

How Do I Replace The Driver Side Fender?

[SBellew]

You mean literally how to unbolt it?

2 bolts near the door hinges
I think 2 under the edge of the hood
I forget how many going down the front beside the radiator
Then all the ones under the inner fender

The main bolts are 9/16 and the rest are 1/2 if I remember correctly.

Be sure to hold onto and remember which of the top and door area bolts have spacers because you might have to use them again to get it to line back up properly.

[old Rusty C10]

you will have to remove the washer bottle too
threre are four b olts on the radiator support
you can take the inner fender too by taking the three or four under the radiator support the large bolt on the inner wheel well and the two inside the hinge area
theres a pic of my engine bay to show ya the location of the washer bottle youll nees 1/2 9/16 and 10 mm sockets wrenches to do the job