|
11-09-2002, 04:42 AM
|
#1 |
|
Registered User
Join Date: Apr 2001
Location: Arizona
Posts: 147
|
Gear ratio and codes?
Later in the day I will be opening up the front and rear dif. to change the fluid. I have really, really never known for sure the exact gear ratios for front or back. Today is a good a day as any to finally find out. Any recommendations on how to get it done.
Ohhh... what kind of codes should I look for and exactly where should I find them?????
__________________
1969 Blazer: 350/350, 4X4, HEI, Edlebrock carb/intake, dual flowmasters, np205, 3:07's and the rest is mostly stock. The front end disc swap is finally complete  2002 Z71 Tahoe. CAI, Flowmaster 40, Silverstars in high, low and fogs and a bunch of mods (upgrades) inside and out. |
|
|
|
11-09-2002, 06:22 AM
|
#2 |
|
Registered User
 
Join Date: Aug 2002
Location: Middleport, Pa. 17953
Posts: 737
|
ratios
when you pull the covers the ring gear will be stamped with numbers.. for example....41:12.. just divide 41 by 12 = 3.42 . just divide the bigger number by the smaller number and this will give exact ratio. hope that helps, kevin
__________________
70 GMC SHORT STEP , 71 BLAZER ,72 JIMMY,72 BLAZER, JUST NEED THAT SUBURBAN NOW......WANTING MORE |
|
|
|
|
11-09-2002, 08:12 AM
|
#3 |
|
Registered User
Join Date: Apr 2001
Location: Arizona
Posts: 147
|
Thanks, I'll be on the look out for that.
__________________
1969 Blazer: 350/350, 4X4, HEI, Edlebrock carb/intake, dual flowmasters, np205, 3:07's and the rest is mostly stock. The front end disc swap is finally complete 2002 Z71 Tahoe. CAI, Flowmaster 40, Silverstars in high, low and fogs and a bunch of mods (upgrades) inside and out. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
