67 SWB roller F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

geoman · 07-10-2008, 02:09 PM

Decent frame, fenders, rusty cab and doors, and decent SWB bed (bed is from a 69). has drum running gear and a 12-bolt posi rear. I have a title for the truck also. Bring some wheels and tires and roll her home. No interior or back glass. Basically the cab is good for scrap or patches.

$275 to just get it off the side of the house. Email me at onefast98z@msn.com if you are serious and would like pics.

Thanks!
Mike

qksilver · 07-10-2008, 06:37 PM

I am interested...will have to figure out how to get it though.
Emailed to get some pix.
Thanks,
Steve

geoman · 07-10-2008, 09:11 PM

Steve,

Email and pics sent...

Thanks!
Mike

chevychase · 07-11-2008, 01:31 AM

Put me second in line after qksilver, pending pics.

geoman · 07-11-2008, 07:30 AM

Email sent Joe....Thanks! Mike

geoman · 07-11-2008, 09:21 PM

Pics sent to you Joe. Thanks! Mike

qksilver · 07-12-2008, 09:29 PM

Thanks for the pix, a great deal!
I have been trying to figure out how to get it. I was going to take a vacation first of oct to visit my daughter in Daytona. I tried to get off from work sooner but can't.
I am going to have to pass.
it was exactly what i needed to finish a truck.
Oh well.........
Thanks,
Steve

geoman · 07-12-2008, 09:40 PM

No problem Steve, I completely understand the job situation. Yes, too bad you were not closer. ttt...

BarryB · 07-13-2008, 01:23 PM

I am interested if it gets to me. I have family in Florida, that might help me get it.

chevychase · 07-13-2008, 04:25 PM

Quote:

Originally Posted by chevychase

Put me second in line after qksilver, pending pics.

Sent 'ya an email with contact info, call me when you can.

geoman · 07-18-2008, 10:49 AM

PM sent Joe...I need to move the truck soon.

Thanks! Mike

chevychase · 07-18-2008, 11:03 AM

Left you a message on the cell, should be able to puck up Sunday. Give me a call.

geoman · 07-18-2008, 11:24 AM

I am at work now but I can call you tonight at home. I know our phones have been acting up. I am apologize if I missed it.

Sunday works fine for me. I will get all the parts together tonight or tomorrow and start securing it up for you. Now I can stop listening to my neighbor whine at me...

Thanks again!!!!
Mike

geoman · 07-24-2008, 11:14 AM

truck is now sold....thanks

07-10-2008, 02:09 PM	#1
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	67 SWB roller F/S Decent frame, fenders, rusty cab and doors, and decent SWB bed (bed is from a 69). has drum running gear and a 12-bolt posi rear. I have a title for the truck also. Bring some wheels and tires and roll her home. No interior or back glass. Basically the cab is good for scrap or patches. $275 to just get it off the side of the house. Email me at onefast98z@msn.com if you are serious and would like pics. Thanks! Mike __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt Last edited by geoman; 07-10-2008 at 02:09 PM.

07-10-2008, 06:37 PM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 67 SWB roller F/S I am interested...will have to figure out how to get it though. Emailed to get some pix. Thanks, Steve

07-10-2008, 09:11 PM	#3
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 67 SWB roller F/S Steve, Email and pics sent... Thanks! Mike __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

07-11-2008, 01:31 AM	#4
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Re: 67 SWB roller F/S Put me second in line after qksilver, pending pics. Last edited by chevychase; 07-11-2008 at 03:50 AM.

07-11-2008, 07:30 AM	#5
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 67 SWB roller F/S Email sent Joe....Thanks! Mike __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

07-11-2008, 09:21 PM	#6
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 67 SWB roller F/S Pics sent to you Joe. Thanks! Mike __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

07-12-2008, 09:29 PM	#7
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 67 SWB roller F/S Thanks for the pix, a great deal! I have been trying to figure out how to get it. I was going to take a vacation first of oct to visit my daughter in Daytona. I tried to get off from work sooner but can't. I am going to have to pass. it was exactly what i needed to finish a truck. Oh well......... Thanks, Steve

07-12-2008, 09:40 PM	#8
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 67 SWB roller F/S No problem Steve, I completely understand the job situation. Yes, too bad you were not closer. ttt... __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt Last edited by geoman; 07-12-2008 at 11:36 PM.

07-13-2008, 01:23 PM	#9
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: 67 SWB roller F/S I am interested if it gets to me. I have family in Florida, that might help me get it. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

07-18-2008, 10:49 AM	#11
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 67 SWB roller F/S PM sent Joe...I need to move the truck soon. Thanks! Mike __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

07-18-2008, 11:03 AM	#12
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Re: 67 SWB roller F/S Left you a message on the cell, should be able to puck up Sunday. Give me a call.

07-18-2008, 11:24 AM	#13
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 67 SWB roller F/S I am at work now but I can call you tonight at home. I know our phones have been acting up. I am apologize if I missed it. Sunday works fine for me. I will get all the parts together tonight or tomorrow and start securing it up for you. Now I can stop listening to my neighbor whine at me... Thanks again!!!! Mike __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt Last edited by geoman; 07-18-2008 at 11:24 AM.

07-24-2008, 11:14 AM	#14
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 67 SWB roller F/S truck is now sold....thanks __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.