door/window handle estucheons - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prg machine · 10-25-2008, 06:55 PM

forgive the spelling...................I am installing mine and I can only assume the large donut instals on the inside of the door trim panel????? Is there any trick, or just push them in????
Thanks

prg machine · 10-25-2008, 07:10 PM

ttt.anyone?????

big_al_71 · 10-25-2008, 07:14 PM

they are a pain in the butt, align them and push you might want to have a tiny flat head screwdriver to help the inner clip go inside the door panel.

prg machine · 10-25-2008, 09:26 PM

Yep!
I figured it out finaly..................the big side is towards the interior of the truck and the little side with the :"prongs" goes in the hole..(PUSH HARD!!!)
Got the passengers side door done
Pictures tommorow

prg machine · 10-25-2008, 09:28 PM

did the cute ladys side first!!!

prg machine · 10-26-2008, 04:44 PM

as promised here are pictures

prg machine · 10-27-2008, 09:26 PM

and

prg machine · 10-27-2008, 11:40 PM

ttt

10-25-2008, 06:55 PM	#1
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	door/window handle estucheons forgive the spelling...................I am installing mine and I can only assume the large donut instals on the inside of the door trim panel????? Is there any trick, or just push them in???? Thanks __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

10-25-2008, 07:10 PM	#2
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: door/window handle estucheons ttt.anyone????? __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

10-25-2008, 07:14 PM	#3
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: door/window handle estucheons they are a pain in the butt, align them and push you might want to have a tiny flat head screwdriver to help the inner clip go inside the door panel. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-25-2008, 09:26 PM	#4
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: door/window handle estucheons Yep! I figured it out finaly..................the big side is towards the interior of the truck and the little side with the :"prongs" goes in the hole..(PUSH HARD!!!) Got the passengers side door done Pictures tommorow __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

10-25-2008, 09:28 PM	#5
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: door/window handle estucheons did the cute ladys side first!!! __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

10-26-2008, 04:44 PM	#6
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: door/window handle estucheons as promised here are pictures Attached Images __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

10-27-2008, 09:26 PM	#7
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: door/window handle estucheons and Attached Images __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

10-27-2008, 11:40 PM	#8
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: door/window handle estucheons ttt __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.