step side help

[pokethesmot]

ok the steps on my step side are rusted through and almost at the point of braking now my question is...is there a place i can buy just the steps or am i gunna have to just reinforce the old steps with diamond plating

[74 C-30]

http://store.73-87chevytrucks.com/me..._Code=STEP7387

[pokethesmot]

Originally Posted by 74 C-30

http://store.73-87chevytrucks.com/me..._Code=STEP7387

now do i have to weld those on or can i just bolt them

[tgh117]

LMC also sells them. With which ever ones you go with, you will have to unbolt the old ones and bolt the new ones on. They should bolt into the same holes. Be sure to test fit all the bolts, as you may need to use a uni bit and enlarge a hole or two since they are aftermarket.

Also, you probably will want to replace the step brace also. As is usual withe the steppers, they rust through between the step and the brace, which usually means the brace is junk to. LMC also carries them. Try around page 28 of the catalog. I just got one from them and it was pretty good qualtiy wise. Not quite as good as the GM one I cam across a year ago, but not too bad.

Good luck

[pokethesmot]

Originally Posted by 74 C-30

http://store.73-87chevytrucks.com/me..._Code=STEP7387

it wont tell me how much shipping is im trying to decide...ether lmc or this one lmc is like $60 total

[Walts_restoration]

Support the board venders, just my opinion.

[Nolowrider]

Not to high hi-jack this thread, but.........

I have been looking for the chrome ones forever. I bought a set years ago, but for the life of me I can't remember where.