trans mt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

short step · 01-01-2009, 04:33 PM

do u remove the std trans nt to install a AOD trans

Wrenchbender Ret · 01-01-2009, 04:51 PM

You have to remove the crossmember under the bell housing & put one under the rear of the automatic.

vasquezmrysvll · 01-01-2009, 09:06 PM

the manual crossmember needs to be cut out, if not removed completely it atleast needs to be cut bank flush with the frame. or the bracket for the shifter will not bolt up. trust me, i just did it the hard way

short step · 01-02-2009, 08:55 AM

thanks guys thats what i thought,but just making sure
bob

01-01-2009, 04:33 PM	#1
short step Registered User Join Date: Dec 2002 Location: Ludlow,MA Posts: 145	trans mt do u remove the std trans nt to install a AOD trans

01-01-2009, 04:51 PM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: trans mt You have to remove the crossmember under the bell housing & put one under the rear of the automatic.

01-01-2009, 09:06 PM	#3
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: trans mt the manual crossmember needs to be cut out, if not removed completely it atleast needs to be cut bank flush with the frame. or the bracket for the shifter will not bolt up. trust me, i just did it the hard way __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

01-02-2009, 08:55 AM	#4
short step Registered User Join Date: Dec 2002 Location: Ludlow,MA Posts: 145	Re: trans mt thanks guys thats what i thought,but just making sure bob

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.