parting out 75 1/2 ton 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**thinair** · 02-02-2009, 11:49 PM

parting this out.everything worked when it was parked (motor junk) here are a couple of parts............
a/c compressor,clutch turns free,w/brackets for small block.......all hoses are here,can tell you that one hose is oily from leaking.$75 plus ride for compressor and brackets.

headliner trim,pre/shoulder belts,grey in color (I also have a-pillars for 81 up if needed for those years.$35 plus ride

tilt,auto column w/key,no wheel.VERY VERY small play,would be super easy to snug this one up.$35 plus ride

there are SOME other good parts on this,let me know with needs,and I will price as they come......75 1/2 ton,400sbc(junk),th350,np203,3.08s

mhicks · 02-03-2009, 10:46 AM

What does the wood grain insert in the dash look like?

**ScottH** · 02-03-2009, 11:39 AM

I might be interested in the seat belts, pending condition and price shipped to 08753.

Also could u give a shipping cost on the column?

Thanks.

jchav62 · 02-03-2009, 11:42 AM

I would like to get in line for the column as well, shipped to 87507.

**thinair** · 02-03-2009, 02:59 PM

mhicks......dash insert isn't any good
scottH......seat belts are probablly supposed to be grey,but they are really faded in spots to a light tan and the buckles are a pea green color,not too good.......$23 shipping to you on the column
JChav62........$19 shipping on the column to you

jchav62 · 02-03-2009, 03:05 PM

If ScottH says no, I'll take it.

**ScottH** · 02-04-2009, 12:01 PM

Great price on the column but I'm gonna have to pass. On the belts, can u post or send me pics of the buckles (female end)?

Thanks.

jchav62 · 02-04-2009, 12:31 PM

I'll take the column. Paypal?

**thinair** · 02-04-2009, 12:38 PM

I sent ya a PM.....$54 total

jchav62 · 02-04-2009, 02:21 PM

PM sent. Payment sent.

Thanks!!

brothers69c-10 · 02-04-2009, 04:04 PM

What are the doors like?

**thinair** · 02-04-2009, 09:05 PM

column is SOLD..........

brothers......these doors are junk,but I still have the other set of doors that I have posted on the site,these are off of a 90 suburban,power,factory power mirrors,RH door glass is missing(have others if needed)couple dings,and JUST starting in the bottom lip.......I could meet you in Atlantic if it would help......$200.00 for the pair

brothers69c-10 · 02-05-2009, 12:39 PM

pm sent

**thinair** · 02-05-2009, 12:59 PM

no PM showing up......????????

brothers69c-10 · 02-05-2009, 05:04 PM

there is one now. My computer crashed when i went to send the one earlier.

84 400 · 02-09-2009, 10:05 AM

np203 shifter assembly?

Russell · 02-09-2009, 02:27 PM

Is the floor hump removable? High hump? What is the overall length of it from the front lip to the rear lip?

**thinair** · 02-10-2009, 01:04 PM

give me a chance to check and I'll let ya know on the shifter and hump

**thinair** · 02-10-2009, 02:39 PM

84 400........$30 plus ride on the shifter assembly

russell......hump unbolts,high,22 3/8" (ish with tape straight across)front to back......$20 plus ride

Russell · 02-10-2009, 11:23 PM

Doh! Seems all the floor humps are 22.5" long, mine is 25.25" long and I can't find one for it anywhere!

84 400 · 02-10-2009, 11:34 PM

You have a PM!

**thinair** · 02-11-2009, 12:57 AM

russell.........I'll check a place here for one like that

84 400.....pm sent back

deedle dinlgehopper · 03-12-2009, 10:06 PM

I need a pair of dust covers for the front hubs. Do you still have them? How much for the pair? Thanks! Dale

**thinair** · 03-13-2009, 12:40 PM

truck is gone,sorry

02-02-2009, 11:49 PM	#1
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,008	parting out 75 1/2 ton 4x4 parting this out.everything worked when it was parked (motor junk) here are a couple of parts............ a/c compressor,clutch turns free,w/brackets for small block.......all hoses are here,can tell you that one hose is oily from leaking.$75 plus ride for compressor and brackets. headliner trim,pre/shoulder belts,grey in color (I also have a-pillars for 81 up if needed for those years.$35 plus ride tilt,auto column w/key,no wheel.VERY VERY small play,would be super easy to snug this one up.$35 plus ride there are SOME other good parts on this,let me know with needs,and I will price as they come......75 1/2 ton,400sbc(junk),th350,np203,3.08s Last edited by thinair; 02-02-2009 at 11:53 PM.

02-03-2009, 10:46 AM	#2
mhicks Registered User Join Date: Jan 2004 Location: Weatherford,Tx Posts: 747	Re: parting out 75 1/2 ton 4x4 What does the wood grain insert in the dash look like?

02-03-2009, 11:39 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: parting out 75 1/2 ton 4x4 I might be interested in the seat belts, pending condition and price shipped to 08753. Also could u give a shipping cost on the column? Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-03-2009, 11:42 AM	#4
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: parting out 75 1/2 ton 4x4 I would like to get in line for the column as well, shipped to 87507. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-03-2009, 02:59 PM	#5
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,008	Re: parting out 75 1/2 ton 4x4 mhicks......dash insert isn't any good scottH......seat belts are probablly supposed to be grey,but they are really faded in spots to a light tan and the buckles are a pea green color,not too good.......$23 shipping to you on the column JChav62........$19 shipping on the column to you

02-03-2009, 03:05 PM	#6
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: parting out 75 1/2 ton 4x4 If ScottH says no, I'll take it. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-04-2009, 12:01 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: parting out 75 1/2 ton 4x4 Great price on the column but I'm gonna have to pass. On the belts, can u post or send me pics of the buckles (female end)? Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-04-2009, 12:31 PM	#8
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: parting out 75 1/2 ton 4x4 I'll take the column. Paypal? __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-04-2009, 12:38 PM	#9
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,008	Re: parting out 75 1/2 ton 4x4 I sent ya a PM.....$54 total

02-04-2009, 02:21 PM	#10
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: parting out 75 1/2 ton 4x4 PM sent. Payment sent. Thanks!! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-04-2009, 04:04 PM	#11
brothers69c-10 Suburban Hick Join Date: Aug 2008 Location: Altoona, IA Posts: 810	Re: parting out 75 1/2 ton 4x4 What are the doors like? __________________ Mathew 1947 Chevy 3600 1951 GMC 100 1969 Chevy C-10 396/500hp TH400 lowered 4" 1968 Imapla Custom 396/325hp TH400 "Grandmas Car" 1976 Crew Cab 4x4 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=488505 1978 Chevy K-10 454 1983 S10 4x4 "Bumblb" (Grandpa's truck) 1993 Chevy S10 V8 conversion 1990 Ford Probe Gt 1992 Dodge W-150 "Old Man's Truck" 1992 Pontiac Grand Prix SE 1992 Mercury Grand Marquis-Mercruiser 2000 Ford F150 (Currently my mother drives this) 1946 Farmall H with Stan Hoist loader 1965 John Deere 110 1961 Wheel Horse " Rat Tractor"

02-04-2009, 09:05 PM	#12
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,008	Re: parting out 75 1/2 ton 4x4 column is SOLD.......... brothers......these doors are junk,but I still have the other set of doors that I have posted on the site,these are off of a 90 suburban,power,factory power mirrors,RH door glass is missing(have others if needed)couple dings,and JUST starting in the bottom lip.......I could meet you in Atlantic if it would help......$200.00 for the pair

02-05-2009, 12:39 PM	#13
brothers69c-10 Suburban Hick Join Date: Aug 2008 Location: Altoona, IA Posts: 810	Re: parting out 75 1/2 ton 4x4 pm sent __________________ Mathew 1947 Chevy 3600 1951 GMC 100 1969 Chevy C-10 396/500hp TH400 lowered 4" 1968 Imapla Custom 396/325hp TH400 "Grandmas Car" 1976 Crew Cab 4x4 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=488505 1978 Chevy K-10 454 1983 S10 4x4 "Bumblb" (Grandpa's truck) 1993 Chevy S10 V8 conversion 1990 Ford Probe Gt 1992 Dodge W-150 "Old Man's Truck" 1992 Pontiac Grand Prix SE 1992 Mercury Grand Marquis-Mercruiser 2000 Ford F150 (Currently my mother drives this) 1946 Farmall H with Stan Hoist loader 1965 John Deere 110 1961 Wheel Horse " Rat Tractor"

02-05-2009, 12:59 PM	#14
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,008	Re: parting out 75 1/2 ton 4x4 no PM showing up......????????

02-05-2009, 05:04 PM	#15
brothers69c-10 Suburban Hick Join Date: Aug 2008 Location: Altoona, IA Posts: 810	Re: parting out 75 1/2 ton 4x4 there is one now. My computer crashed when i went to send the one earlier. __________________ Mathew 1947 Chevy 3600 1951 GMC 100 1969 Chevy C-10 396/500hp TH400 lowered 4" 1968 Imapla Custom 396/325hp TH400 "Grandmas Car" 1976 Crew Cab 4x4 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=488505 1978 Chevy K-10 454 1983 S10 4x4 "Bumblb" (Grandpa's truck) 1993 Chevy S10 V8 conversion 1990 Ford Probe Gt 1992 Dodge W-150 "Old Man's Truck" 1992 Pontiac Grand Prix SE 1992 Mercury Grand Marquis-Mercruiser 2000 Ford F150 (Currently my mother drives this) 1946 Farmall H with Stan Hoist loader 1965 John Deere 110 1961 Wheel Horse " Rat Tractor"



Register or Log In To remove these advertisements.

02-09-2009, 10:05 AM	#16
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: parting out 75 1/2 ton 4x4 np203 shifter assembly? __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

02-09-2009, 02:27 PM	#17
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: parting out 75 1/2 ton 4x4 Is the floor hump removable? High hump? What is the overall length of it from the front lip to the rear lip? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-10-2009, 01:04 PM	#18
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,008	Re: parting out 75 1/2 ton 4x4 give me a chance to check and I'll let ya know on the shifter and hump

02-10-2009, 02:39 PM	#19
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,008	Re: parting out 75 1/2 ton 4x4 84 400........$30 plus ride on the shifter assembly russell......hump unbolts,high,22 3/8" (ish with tape straight across)front to back......$20 plus ride

02-10-2009, 11:23 PM	#20
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: parting out 75 1/2 ton 4x4 Doh! Seems all the floor humps are 22.5" long, mine is 25.25" long and I can't find one for it anywhere! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-10-2009, 11:34 PM	#21
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: parting out 75 1/2 ton 4x4 You have a PM! __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

02-11-2009, 12:57 AM	#22
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,008	Re: parting out 75 1/2 ton 4x4 russell.........I'll check a place here for one like that 84 400.....pm sent back

03-12-2009, 10:06 PM	#23
deedle dinlgehopper Registered User Join Date: Mar 2009 Location: Florence, AL Posts: 1	Re: parting out 75 1/2 ton 4x4 I need a pair of dust covers for the front hubs. Do you still have them? How much for the pair? Thanks! Dale

03-13-2009, 12:40 PM	#24
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,008	Re: parting out 75 1/2 ton 4x4 truck is gone,sorry

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.