Square Door Hinge Bolt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BruthaMan · 02-09-2009, 08:28 PM

On the top door hinge, there's one odd nut that is square. Is that welded to the hinge and the bolt is on the inside, or does that square bolt actually come off?

I haven't had any success getting past it and need to get the hinges off. Any advice greatly appreciated, thanks!

**old Rusty C10** · 02-09-2009, 08:36 PM

That is actually a welded nut on the hinge you need to go inside the cab and unwrench the bolt that comes through the cab and into the hinge

BruthaMan · 02-09-2009, 09:09 PM

Many thanks, Bob!

heavychevy79 · 02-10-2009, 02:16 AM

That's the only F%rd part of the truck. lol

Tape your socket onto the extention because I know of no magnet that will
get something out of a place like that.
I haven't droped one in there before but I can imagen hearing it roll around in there while driving.

Trucks with no dome light have a metal plug you'll pop out with a screwdriver.
Trucks with a dome light have a rubber plug with a wire going through it that you can pull out with your fingers.

02-09-2009, 08:28 PM	#1
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Square Door Hinge Bolt On the top door hinge, there's one odd nut that is square. Is that welded to the hinge and the bolt is on the inside, or does that square bolt actually come off? I haven't had any success getting past it and need to get the hinges off. Any advice greatly appreciated, thanks! __________________ 1972 C10 Highlander - The making of a daily driver

02-09-2009, 08:36 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Square Door Hinge Bolt That is actually a welded nut on the hinge you need to go inside the cab and unwrench the bolt that comes through the cab and into the hinge __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

02-09-2009, 09:09 PM	#3
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Re: Square Door Hinge Bolt Many thanks, Bob! __________________ 1972 C10 Highlander - The making of a daily driver

02-10-2009, 02:16 AM	#4
heavychevy79 Cheyenne Super Join Date: Nov 2008 Location: Dallas Texas Posts: 545	Re: Square Door Hinge Bolt That's the only F%rd part of the truck. lol Tape your socket onto the extention because I know of no magnet that will get something out of a place like that. I haven't droped one in there before but I can imagen hearing it roll around in there while driving. Trucks with no dome light have a metal plug you'll pop out with a screwdriver. Trucks with a dome light have a rubber plug with a wire going through it that you can pull out with your fingers.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.