1/2 ton stainless hubcaps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Down south truckin · 02-20-2009, 01:46 AM

This is a pretty good set of caps they are not perfect but are better than average in my opinion 2 are nice 1 is good and 1 has 3 dings all of them need paint. $60 plus shipping paypal or postal money order.thanks Mike

Down south truckin · 03-04-2009, 10:16 PM

I will consider trades as well Thanks Mike

**lolife99** · 03-05-2009, 08:30 AM

What are you needing for a trade?
Also shipping cost to 65251.

Down south truckin · 03-05-2009, 10:29 PM

I really don't need anything specifically
I'm always buying 3/4 ton caps 4x4 + t/c shifters,67-72 4x4 bumper brackets, 4x4 shifter linkage ,4x4 clutch linkage, 2wd lowering parts,tc shifter boot rings,??? got any drag racing parts??
Shipping would be around $12 ups

Thanks Mike

Quote:

Originally Posted by lolife99

What are you needing for a trade?
Also shipping cost to 65251.

Down south truckin · 03-17-2009, 09:12 PM

ttt

ckexswb · 03-17-2009, 11:19 PM

Looking for inner rear bumper brackets, leaf spring 4x. Hope its allright to butt in.

Longhorn321 · 03-17-2009, 11:40 PM

What is the difference between those and 3/4 ton caps? Just curious so if I see some 1/2 tons I don't buy them by mistake. Thanks,

Down south truckin · 03-18-2009, 12:12 AM

Quote:

Originally Posted by Longhorn321

What is the difference between those and 3/4 ton caps? Just curious so if I see some 1/2 tons I don't buy them by mistake. Thanks,

The 1/2 ton ones are 10.5 inches across and the 3/4 ton ones are 12 inches across.

the center is shaped a little different It's hard to describe but when you look at them side by side you will see it. the 3/4 ton ones have a sunk in ring around the center. I'll see if I have some pictures that show it. thanks Mike

Down south truckin · 03-18-2009, 12:13 AM

Quote:

Originally Posted by ckexswb

Looking for inner rear bumper brackets, leaf spring 4x. Hope its allright to butt in.

I would trade on some if you have some and want these hubcaps.thanks Mike

Down south truckin · 03-18-2009, 12:17 AM

Quote:

Originally Posted by Down south truckin

The 1/2 ton ones are 10.5 inches across and the 3/4 ton ones are 12 inches across.

the center is shaped a little different It's hard to describe but when you look at them side by side you will see it. the 3/4 ton ones have a sunk in ring around the center. I'll see if I have some pictures that show it. thanks Mike

Here is a shot of the center on a 3/4 ton cap you can compare it to the ones above

Down south truckin · 03-18-2009, 12:20 AM

Also the edges appear to be thicker and more square on the 1/2 tons than the 3/4 ton edges which appear to be angled and thinner

Longhorn321 · 03-18-2009, 09:28 AM

Cool. Thanks,

sighlurr · 08-21-2009, 11:22 PM

Can you check the ride to 95630 for me?

Kiamichi Kid · 07-29-2010, 10:09 AM

Do you still have these?

Longhorn321 · 07-29-2010, 10:48 AM

Quote:

Originally Posted by Kiamichi Kid

Do you still have these?

The last post was almost a year ago so I wouldn't hold my breath.

Kiamichi Kid · 07-29-2010, 11:03 AM

:-) I agree wishful thinking :-)

Down south truckin · 08-03-2010, 10:45 PM

I may actually still have these,give me a day or two and I'll get back to you. thanks Mike

Kiamichi Kid · 08-04-2010, 10:04 AM

Ok, Thanks

02-20-2009, 01:46 AM	#1
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	1/2 ton stainless hubcaps This is a pretty good set of caps they are not perfect but are better than average in my opinion 2 are nice 1 is good and 1 has 3 dings all of them need paint. $60 plus shipping paypal or postal money order.thanks Mike Attached Images

03-04-2009, 10:16 PM	#2
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1/2 ton stainless hubcaps I will consider trades as well Thanks Mike

03-05-2009, 08:30 AM	#3
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,704	Re: 1/2 ton stainless hubcaps What are you needing for a trade? Also shipping cost to 65251. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 03-05-2009 at 12:50 PM.

03-17-2009, 09:12 PM	#5
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1/2 ton stainless hubcaps ttt

03-17-2009, 11:19 PM	#6
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: 1/2 ton stainless hubcaps Looking for inner rear bumper brackets, leaf spring 4x. Hope its allright to butt in.

03-17-2009, 11:40 PM	#7
Longhorn321 Size Matters Join Date: Aug 2007 Location: Lyman, SC Posts: 9,189	Re: 1/2 ton stainless hubcaps What is the difference between those and 3/4 ton caps? Just curious so if I see some 1/2 tons I don't buy them by mistake. Thanks, __________________ "Reading the owners manual is only for quitters." Jason Harper, Bloomberg News. ...WOOOO HOOOO!!!!

03-18-2009, 12:20 AM	#11
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1/2 ton stainless hubcaps Also the edges appear to be thicker and more square on the 1/2 tons than the 3/4 ton edges which appear to be angled and thinner Attached Images

03-18-2009, 09:28 AM	#12
Longhorn321 Size Matters Join Date: Aug 2007 Location: Lyman, SC Posts: 9,189	Re: 1/2 ton stainless hubcaps Cool. Thanks, __________________ "Reading the owners manual is only for quitters." Jason Harper, Bloomberg News. ...WOOOO HOOOO!!!!

08-21-2009, 11:22 PM	#13
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 1/2 ton stainless hubcaps Can you check the ride to 95630 for me?

07-29-2010, 10:09 AM	#14
Kiamichi Kid Registered User Join Date: Jan 2008 Location: McAlester, Oklahoma Posts: 27	Re: 1/2 ton stainless hubcaps Do you still have these? __________________ 1969 CST-10 Stepside 1971 C-10 Short Fleetside 1967 GMC 3/4 Suburban 4x4 1972 C-10 Longbed

07-29-2010, 11:03 AM	#16
Kiamichi Kid Registered User Join Date: Jan 2008 Location: McAlester, Oklahoma Posts: 27	Re: 1/2 ton stainless hubcaps :-) I agree wishful thinking :-) __________________ 1969 CST-10 Stepside 1971 C-10 Short Fleetside 1967 GMC 3/4 Suburban 4x4 1972 C-10 Longbed

08-03-2010, 10:45 PM	#17
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1/2 ton stainless hubcaps I may actually still have these,give me a day or two and I'll get back to you. thanks Mike

08-04-2010, 10:04 AM	#18
Kiamichi Kid Registered User Join Date: Jan 2008 Location: McAlester, Oklahoma Posts: 27	Re: 1/2 ton stainless hubcaps Ok, Thanks __________________ 1969 CST-10 Stepside 1971 C-10 Short Fleetside 1967 GMC 3/4 Suburban 4x4 1972 C-10 Longbed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.