Rally wheel trim rings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Orange71shorty** · 02-26-2009, 05:27 PM

Could someone please tell me where to get the correct trim rings for 5 on5 rallys 8" wide? Thanks

67_C-30 · 02-26-2009, 06:34 PM

Welcome to the board!

I don't know about the correct ones, because actually Rallys never came from the factory on this year truck, but I think you could pick up the style that did come on the '73 - up trucks on ebay. I bought a set a few years back that were the ropunded style that came on them from someone on ebay (can't remember the seller). This time around on my red '69, I went with the wide 3" rings that came on 8" Corvette Rallys. I love the look of them.

Sinister · 02-26-2009, 06:37 PM

Don't know if they're "correct" but Hubcap Mike's has trim rings.
http://www.hubcapmike.com/trim-rings-beauty-rings.html
Here's some on my steelies.

**Orange71shorty** · 02-26-2009, 10:26 PM

Hey 67 C30 good lookin' ride what drop do you have? I picked up a set of the 3" deep rings too but I was worried it might hide the little slots too much but it looks good on your truck.Thanks for the replys

67_C-30 · 02-26-2009, 10:48 PM

Thanks! It has McGaughy 2/4 drop springs on it. This pic is a little misleading because I have (10) 40 lb bags of vermiculite on it, so it actually sits about 3/4" - 1" higher in the rear. Its still pretty close though. Below a pic without the weight. I'm running 245/60 R15's in the front and 275/60 R15's in rear, so that is also helping the front look a little lower. I think I'm gonna drop it another inch in the rear to make it look like the loaded pic, and call it good!

9teen69 · 02-26-2009, 10:48 PM

Bought some a year ago from a company selling on eBay located in Colorado. I called them and ordered over the phone - I can't remember their name - I'll try and locate for you. They are polished stainless.

9teen69 · 02-26-2009, 11:17 PM

Found them. Rocky Mountain Wheel. Toll Free 1-800-355-9280 Here is one of their listings.
They fit and look great - all metal. I was concerned because they were so cheap so I called and asked a few questions, shipped quick.

**Orange71shorty** · 02-26-2009, 11:25 PM

Thanks 9teen69. Those look good I will check them out

Brad · 02-27-2009, 08:44 PM

I have a set of trim rings exactly like 9teen69 has in his picture. I got them off an Astro van.

02-26-2009, 05:27 PM	#1
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 624	Rally wheel trim rings Could someone please tell me where to get the correct trim rings for 5 on5 rallys 8" wide? Thanks

02-26-2009, 06:34 PM	#2
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Rally wheel trim rings Welcome to the board! I don't know about the correct ones, because actually Rallys never came from the factory on this year truck, but I think you could pick up the style that did come on the '73 - up trucks on ebay. I bought a set a few years back that were the ropunded style that came on them from someone on ebay (can't remember the seller). This time around on my red '69, I went with the wide 3" rings that came on 8" Corvette Rallys. I love the look of them. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

02-26-2009, 06:37 PM	#3
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Rally wheel trim rings Don't know if they're "correct" but Hubcap Mike's has trim rings. http://www.hubcapmike.com/trim-rings-beauty-rings.html Here's some on my steelies. __________________ Beat it to fit, Paint it to match... Last edited by Sinister; 02-26-2009 at 06:40 PM.

02-26-2009, 10:26 PM	#4
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 624	Re: Rally wheel trim rings Hey 67 C30 good lookin' ride what drop do you have? I picked up a set of the 3" deep rings too but I was worried it might hide the little slots too much but it looks good on your truck.Thanks for the replys

02-26-2009, 10:48 PM	#5
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Rally wheel trim rings Thanks! It has McGaughy 2/4 drop springs on it. This pic is a little misleading because I have (10) 40 lb bags of vermiculite on it, so it actually sits about 3/4" - 1" higher in the rear. Its still pretty close though. Below a pic without the weight. I'm running 245/60 R15's in the front and 275/60 R15's in rear, so that is also helping the front look a little lower. I think I'm gonna drop it another inch in the rear to make it look like the loaded pic, and call it good! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 02-26-2009 at 10:48 PM.

02-26-2009, 10:48 PM	#6
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Rally wheel trim rings Bought some a year ago from a company selling on eBay located in Colorado. I called them and ordered over the phone - I can't remember their name - I'll try and locate for you. They are polished stainless. Attached Images __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-26-2009, 11:17 PM	#7
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Rally wheel trim rings Found them. Rocky Mountain Wheel. Toll Free 1-800-355-9280 Here is one of their listings. They fit and look great - all metal. I was concerned because they were so cheap so I called and asked a few questions, shipped quick. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-26-2009, 11:25 PM	#8
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 624	Re: Rally wheel trim rings Thanks 9teen69. Those look good I will check them out

02-27-2009, 08:44 PM	#9
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: Rally wheel trim rings I have a set of trim rings exactly like 9teen69 has in his picture. I got them off an Astro van. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.