New Here/Rocker Panel Replacement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blue64 · 04-02-2009, 06:51 PM

Hey, I’m new here. I just received my first truck for an early High School Graduation gift. This was my poppas that he gave to my dad for graduation. It’s a 64 Chevy

short wheal fleet side. That my dad and I are going to restore. My question is, dose LCM have good replacement panels? Meaning dose the door still shut proper and stuff like that?

If you know of a place that carries better replacements it will be greatly apperated.

Thanks,
Shane(blue64)

jgarverick · 04-02-2009, 07:14 PM

it took me longer to figure out what you were asking than to think of a response. seriously, type something worth reading. everyone will be glad to help you, but you have to have enough sense to communicate like a human being.

Dirtygrunt · 04-02-2009, 07:31 PM

Dang I thought only women got pms

But for your question blue the replacement panels I got from LMC fit nice I haven't used their doors just the rockers and cab corners hope this helps

blue64 · 04-02-2009, 07:32 PM

Thanks, for the advice.

blue64 · 04-02-2009, 07:34 PM

Quote:

Originally Posted by Dirtygrunt

Dang I thought only women got pms

But for your question blue the replacement panels I got from LMC fit nice I haven't used their doors just the rockers and cab corners hope this helps

haha. Thanks for the help. Do your doors still latch proper?

ol Curt · 04-02-2009, 07:40 PM

Blue 64, welcome to the board from southern Indiana! I understood your question.

You'll find there aren't many responses like your first welcoming one. This is a great group of guys. They not only help, they follow up to see how it is going. Be forwarned....they REALLY like pictures!

blue64 · 04-02-2009, 07:45 PM

Quote:

Originally Posted by ol Curt

Blue 64, welcome to the board from southern Indiana! I understood your question.

You'll find there aren't many responses like your first welcoming one. This is a great group of guys. They not only help, they follow up to see how it is going. Be forwarned....they REALLY like pictures!

Thanks, most of Ya'll all seem to be.haha I plan to have some up tomorrow morning.

19GMC63 · 04-02-2009, 07:48 PM

Quote:

Originally Posted by jgarverick

it took me longer to figure out what you were asking than to think of a response. seriously, type something worth reading. everyone will be glad to help you, but you have to have enough sense to communicate like a human being.

Maybe you should re-read the rules you agreed to when you signed up on this forum. Your post is completely uneeded and doesn't help the OP with his question at all. Please keep comments like these to yourself.

thank you

19GMC63 · 04-02-2009, 07:57 PM

But to the topic on hand, welcome to the board.
Someone with more experience will probably chime in, but I would see if you get get the panels somewhere else, as LMCs prices are usually outrageous. I imagine replacement sheetmetal is only made by a handful of manufacturers, so you could probably get the same exact stuff a little cheaper somewhere else, but I could be wrong.

The guy to ask though would be LILRED66.

*LILRED66* · 04-02-2009, 07:57 PM

Welcome aboard from Kansas City, KS. Here is a comprehensive list of suppliers you may want to contact for a catalog, if you are embarking on a total restoration of a '60-'66 Chevy truck:

www.bowtiebits.com
www.lmctruck.com
www.classicparts.com
www.oldchevytrucks.com
www.ecklerstrucks.com
www.gspp.com
www.truckandcarshop.com
www.harmons.com
www.oldmusclecars.com
www.classicchevroletparts.com
www.classicindustries.com
www.bobschevytrucks.com
www.brotherstrucks.com
www.mar-k.com
www.wheelvintiques.com
www.totallystainless.com
www.earlyclassic.com
www.horkeyswoodandparts.com
www.raybuck.com
www.americanclassic.com
www.yogisinc.com
www.rbsauto.com
www.obschevy.com
www.cheyennepickup.com
www.chevypickupparts.com

Good luck with your project and remember to post early and often.

PS-It is easier to understand what you are needing if your sentences are readable and the words spelled correctly.

jgarverick · 04-02-2009, 09:10 PM

in retrospect, ya i suppose that was a bit harsh.

daverod · 04-02-2009, 09:53 PM

At least he's going to graduate.

Just learn to use the spell check and you'll be ok

Alan's Classic · 04-02-2009, 09:55 PM

There's usually not any issues that I know of when it comes to outer rocker replacement. They fit up really nice. The problems arise when you go into the floor pan. Go thru my build and you will see what problems I ran into.

Strodder · 04-02-2009, 10:18 PM

Welcome aboard blue64. Just ask when you need help. We're here for you. I can't spell for crap either. I use spell check a lot.

blue64 · 04-03-2009, 12:44 AM

Thanks for all the suggestions and advice. I can't type or spell half of the time. hahah.

64c20crewcab · 04-03-2009, 11:45 AM

Hey Blue - Welcome from SoCal!
I too will be attacking the rockers this summer for sure. There is much info on this board for this and other items we all have / may come across. Search or ask here and you will find.

neto · 04-03-2009, 07:52 PM

Welcome aboard. I'm also doing the rockers on my wifes 65. The drivers side is done and I just took a break from putting the door on the passengers side to check for clearance. A great post to follow is Alan's Classic build thread.

mbgmike · 04-04-2009, 11:37 AM

Quote:

Originally Posted by blue64

Hey, I’m new here. I just received my first truck for an early High School Graduation gift. This was my poppas that he gave to my dad for graduation. It’s a 64 Chevy

short wheal fleet side. That my dad and I are going to restore. My question is, dose LCM have good replacement panels? Meaning dose the door still shut proper and stuff like that?

If you know of a place that carries better replacements it will be greatly apperated.

Thanks,
Shane(blue64)

LMC does not make any panels.They purchase from a variety of suppliers Just like we do They do sell TriPlus parts but sell from other MFG's also. Nothing wrong with their parts any more than anyone elses. We have installed alot of doors but ony one drivers side on a 65 and it fit and latched ok. Sorry no pics we sold it beforer it was finished. You can get alot better prices from buying from a board vendor here than the larger companies

mbgmike · 04-04-2009, 11:43 AM

Quote:

Originally Posted by blue64

Thanks for all the suggestions and advice. I can't type or spell half of the time. hahah.

Don't feel bad. I lived in Carroll county for a number of years and it took me awhile to figger out what people were saying. It just took some getting used to. SOmeone told me to get a Stob and I just looked at him

04-02-2009, 06:51 PM	#1
blue64 Registered User Join Date: Mar 2009 Location: Georgia Posts: 51	New Here/Rocker Panel Replacement Hey, I’m new here. I just received my first truck for an early High School Graduation gift. This was my poppas that he gave to my dad for graduation. It’s a 64 Chevy short wheal fleet side. That my dad and I are going to restore. My question is, dose LCM have good replacement panels? Meaning dose the door still shut proper and stuff like that? If you know of a place that carries better replacements it will be greatly apperated. Thanks, Shane(blue64) Last edited by blue64; 04-02-2009 at 08:00 PM.

04-02-2009, 07:14 PM	#2
jgarverick Registered User Join Date: Feb 2009 Location: columbus ohio Posts: 85	Re: New Here/Rocker Panel Replacement it took me longer to figure out what you were asking than to think of a response. seriously, type something worth reading. everyone will be glad to help you, but you have to have enough sense to communicate like a human being. __________________ Jason Garverick 64 C10 SWB Stepside 350/muncie - 5.3 vortec (soon)Thread 69 AMC Javelin 360/auto - 417 stroker (soon) 68 Scout (Basketcase) 06 Ram HEMI SWB Reg Cab Daily Driver US Army Vet

04-02-2009, 07:31 PM	#3
Dirtygrunt Registered User Join Date: Feb 2009 Location: Randleman, NC Posts: 20	Re: New Here/Rocker Panel Replacement Dang I thought only women got pms But for your question blue the replacement panels I got from LMC fit nice I haven't used their doors just the rockers and cab corners hope this helps

04-02-2009, 07:32 PM	#4
blue64 Registered User Join Date: Mar 2009 Location: Georgia Posts: 51	Re: New Here/Rocker Panel Replacement Thanks, for the advice.

04-02-2009, 07:40 PM	#6
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: New Here/Rocker Panel Replacement Blue 64, welcome to the board from southern Indiana! I understood your question. You'll find there aren't many responses like your first welcoming one. This is a great group of guys. They not only help, they follow up to see how it is going. Be forwarned....they REALLY like pictures! Last edited by ol Curt; 04-02-2009 at 07:40 PM.

04-02-2009, 07:57 PM	#9
19GMC63 Registered User Join Date: Nov 2006 Location: Nashville, TN Posts: 1,510	Re: New Here/Rocker Panel Replacement But to the topic on hand, welcome to the board. Someone with more experience will probably chime in, but I would see if you get get the panels somewhere else, as LMCs prices are usually outrageous. I imagine replacement sheetmetal is only made by a handful of manufacturers, so you could probably get the same exact stuff a little cheaper somewhere else, but I could be wrong. The guy to ask though would be LILRED66.

04-02-2009, 07:57 PM	#10
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: New Here/Rocker Panel Replacement Welcome aboard from Kansas City, KS. Here is a comprehensive list of suppliers you may want to contact for a catalog, if you are embarking on a total restoration of a '60-'66 Chevy truck: www.bowtiebits.com www.lmctruck.com www.classicparts.com www.oldchevytrucks.com www.ecklerstrucks.com www.gspp.com www.truckandcarshop.com www.harmons.com www.oldmusclecars.com www.classicchevroletparts.com www.classicindustries.com www.bobschevytrucks.com www.brotherstrucks.com www.mar-k.com www.wheelvintiques.com www.totallystainless.com www.earlyclassic.com www.horkeyswoodandparts.com www.raybuck.com www.americanclassic.com www.yogisinc.com www.rbsauto.com www.obschevy.com www.cheyennepickup.com www.chevypickupparts.com Good luck with your project and remember to post early and often. PS-It is easier to understand what you are needing if your sentences are readable and the words spelled correctly.

04-02-2009, 09:10 PM	#11
jgarverick Registered User Join Date: Feb 2009 Location: columbus ohio Posts: 85	Re: New Here/Rocker Panel Replacement in retrospect, ya i suppose that was a bit harsh. __________________ Jason Garverick 64 C10 SWB Stepside 350/muncie - 5.3 vortec (soon)Thread 69 AMC Javelin 360/auto - 417 stroker (soon) 68 Scout (Basketcase) 06 Ram HEMI SWB Reg Cab Daily Driver US Army Vet

04-02-2009, 09:53 PM	#12
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: New Here/Rocker Panel Replacement At least he's going to graduate. Just learn to use the spell check and you'll be ok

04-02-2009, 09:55 PM	#13
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: New Here/Rocker Panel Replacement There's usually not any issues that I know of when it comes to outer rocker replacement. They fit up really nice. The problems arise when you go into the floor pan. Go thru my build and you will see what problems I ran into. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-02-2009, 10:18 PM	#14
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: New Here/Rocker Panel Replacement Welcome aboard blue64. Just ask when you need help. We're here for you. I can't spell for crap either. I use spell check a lot. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-03-2009, 12:44 AM	#15
blue64 Registered User Join Date: Mar 2009 Location: Georgia Posts: 51	Re: New Here/Rocker Panel Replacement Thanks for all the suggestions and advice. I can't type or spell half of the time. hahah.

04-03-2009, 11:45 AM	#16
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Re: New Here/Rocker Panel Replacement Hey Blue - Welcome from SoCal! I too will be attacking the rockers this summer for sure. There is much info on this board for this and other items we all have / may come across. Search or ask here and you will find. __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

04-03-2009, 07:52 PM	#17
neto Registered User Join Date: Jan 2007 Location: Madera, California Posts: 291	Re: New Here/Rocker Panel Replacement Welcome aboard. I'm also doing the rockers on my wifes 65. The drivers side is done and I just took a break from putting the door on the passengers side to check for clearance. A great post to follow is Alan's Classic build thread.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.