Porterbuilt-Accuair Group Buy: 10% off and Free Shipping! Till May 31

[PBFAB.COM]

Porterbuilt has teamed up with AccuAir to provide you guys with the most
cutting-edge air management technology available.

This group buy offer is valid for all AccuAir Electronic Leveling
Systems, and complete Air Management Packages through June 1. Group buy discount begins with a minimum of 5 leveling systems (parts that begin with "z" below).

*Electronic Leveling Systems Only:*

zAA-ELS4-RSW:
Electronic Leveling System (4-way) with rocker switch interface.
$795 list / $715.50 (with discount)



zAA-ELS4-TPAD:
Electronic Leveling System (4-way) with touchpad interface.
$1,095 list / $985.50 (with discount)







Optional items for use with any AccuAir Leveling System:

AA-RF-FOB:
Wireless Key-Fob Module (triggers 3-saved heights and all-down).
$195 list / $175.50 (with discount)



AA-VU4:
4-way 3/8" Solenoid Valve Unit.
$499 list / $449.10 (with discount)



AA-38-MUFF:
Exhaust mufflers for use with VU4 (pair)
$30 list / $27.00 (with discount)



*Complete Air Management Packages:*

zAA-AMP-1:
Electronic leveling system (4 way) with touchpad interface;
4-way 3/8 solenoid valve unit; Viair 400c; 5 gallon aluminum tank; 3/8”
plumbing kit with filter.
$1,995 list / $1795.50 (with discount) or $1,695 list / $1,525.50 (with
discount) for rocker switch interface instead of touchpad.



zAA-AMP-2:
Electronic leveling system (4 way) with touchpad interface;
4-way 3/8 solenoid valve unit; (2) Viair 400c; 5 gallon aluminum tank; 3/8” plumbing kit with filter.
$2,195 list / $1975.50 (with discount) or $1,895 list / $1,705.50 (with
discount) for rocker switch interface instead of touchpad.



Optional for use with either of the Air Management Systems above:

AA-WIREKIT-70A:
Compressor power wiring kit, (25 ft of 6 awg cable, 70amp sealed Maxi-Fuse, 90 Amp heavy-duty compressor relay):
$125 list / $112.50 (with discount)

[IvelDesigns]

man, that "Electronic Leveling System (4-way) with touchpad interface." is awful tempting as i'm getting ready to mount all my air hardware.

might have to have a chat with the wife (aka: banker) tomorrow.

[fastbagged68]

Anyone thinking about buy an air management. I would buy this one. What a deal!!!

[fastbagged68]

Just incase you haven't seen my video or post of the e-Level system at work, here it is... http://67-72chevytrucks.com/vboard/s...d.php?t=335036

The video is on the 3rd page.

[jasonb72]

Nate,

Once again you are the man. I will be calling you soon. I have taken an oath to stimulate the economy single handedly through Porter Built.

[VA72C10]

You're killing me

[ShowSS12]

SO will the rocker switch set-up work with my current SMC valves?

[Hart_Rod]

I really don't need this right now (zAA-AMP-2), but I will eventually and the price is to good to pass up. What are the possibilities of swapping the 5 gallon tank for a smaller size and swapping one of the compressors for remote? Let me know.

R/

[XXL]

Originally Posted by jasonb72

Nate,

Once again you are the man. I will be calling you soon. I have taken an oath to stimulate the economy single handedly through Porter Built.

Stimulating Porterbuilt *ewwwww*

[AccuAirSuspension]

First, I want to thank Nathan @ Porterbuilt for putting this group buy together for you guys.

Now to answer some questions...

Originally Posted by ShowSS12

SO will the rocker switch set-up work with my current SMC valves?

The e-Level Controller (with Touchpad or Rocker switch) is designed to work with any valves out there.... Yes even those of you with monster 1/2" diaphragm valves. The controller will learn exactly how fast your valves are during the automatic calibration and then adjust its operation accordingly.

The only thing to keep in mind is that there is a compromise in the accuracy of the RideMonitor Mode with large valves.... here is why; The smallest increment that the valve can move the vehicle is the most accurate that the RideMonitor Mode can ever be, (i.e. a minimum pulse of 60 mS on a fast-valve in the lightweight rear of a truck may equate to minimum increment of 1". So for this case the RideMonitor Mode will then automatically set a tolerance of 1". So you would have to move the truck 1" before the system would try to make a correction.) For ridiculously fast valves, the system actually disables RideMonitor Mode completely to avoid violent height changes while driving.

For the best overall system performance, we have designed the VU4 valves to be the perfect mix between speed and accuracy. This combination will get most vehicles from aired out, to ride height in ~2 seconds and allow the e-Level controller to hold a height tolerance of better than 1/8" in most cases. Plus, it's compact and leak-free design makes it the most dependable setup on the market.

[AccuAirSuspension]

Originally Posted by Hart_Rod

I really don't need this right now (zAA-AMP-2), but I will eventually and the price is to good to pass up. What are the possibilities of swapping the 5 gallon tank for a smaller size and swapping one of the compressors for remote? Let me know.

R/

We can switch out the 5-gallon (29" long) for a 3-gallon (19" long) free of charge. Both are 6.5" in diameter and 8" in overall height with the mounting brackets. We go with the 5-gallon for the Air Management Packages because it is enough air to go from aired out to max height without waiting for the compressor(s) on most applications. Guys that don't have room for the 5-gallon will often run (2) 3-gallons for this reason.

And Yes, all tanks are available in Black or Clear Anodize. Just specify at the time of your order.

We can also swap a compressor for a remote no problem.

[jasonb72]

Always the funny man....

Originally Posted by XXL

Stimulating Porterbuilt *ewwwww*

[dznucks]

Going to have to cut back on my vises until i can afford it.

[XXL]

Originally Posted by dznucks

Going to have to cut back on my vises until i can afford it.

?

[PBFAB.COM]

We have one committed already... don't miss out on this offer!

[BigShoe24]

Very, Very Interested. Let me take my change jar to the bank and see if I come up with enough scratch. I'll try to contact you Nathan, in the near future if I'm on board.

[jasonb72]

I sure better not be the only one that wants to get in on this. Nate, Forgot to tell you make the tank clear anodize.

[BigShoe24]

I wonder if anyone has installed this system who is also running a PB drop member, as well as ART arms? Also, I have a parallel 4-Link from KP out back, wonder how that would look/work with the leveling sensors.
I think I'm just trying to figure out a reason not to buy this puppy.

[jasonb72]

Quit trying so hard, I have the PB Front and Rear DM, I do not see any issues yet why it can not work in many different configurations.

[IvelDesigns]

I got the green light to get the parts i "need" to finish the truck, but unfortunately, this wasn't one of them. Maybe next time...

[PBFAB.COM]

Originally Posted by BigShoe24

I wonder if anyone has installed this system who is also running a PB drop member, as well as ART arms? Also, I have a parallel 4-Link from KP out back, wonder how that would look/work with the leveling sensors.
I think I'm just trying to figure out a reason not to buy this puppy.

Leveling sensor installation is straight forward.... how about thinking of all the reasons TO buy it!

[AVS_JASON]

Originally Posted by AccuAirSuspension

We can switch out the 5-gallon (29" long) for a 3-gallon (19" long) free of charge. Both are 6.5" in diameter and 8" in overall height with the mounting brackets. We go with the 5-gallon for the Air Management Packages because it is enough air to go from aired out to max height without waiting for the compressor(s) on most applications. Guys that don't have room for the 5-gallon will often run (2) 3-gallons for this reason.

And Yes, all tanks are available in Black or Clear Anodize. Just specify at the time of your order.

We can also swap a compressor for a remote no problem.

Those tanks are BEAUTIFUL...

BTW, Jeff has this on his "E-Rod"..... So bad ass, awesome product.

[Hart_Rod]

Originally Posted by porterbuilt

We have one committed already... don't miss out on this offer!

In. PM and email sent.

[hammered65]

Just curious if the Electronic Leveling System will work with ART RidePro valves?

[jasonb72]

It was stated that the system will work with all other valves, as it actually learns what ever system is used in conjunction with it.

Originally Posted by hammered65

Just curious if the Electronic Leveling System will work with ART RidePro valves?