BLAZER IS DONE!!! (well sorta) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teamradrz1 · 06-11-2009, 07:38 PM

The 71 is finally back at home after a 13 month hiatus at the body shop. It still needs fine tuning and I have lots more small projects for her but she looks great and is driveable and enjoyable again

still working on.

1. new PB booster and master cylinder
2. seat belts and rear seat
3. Wheels and Tires
4. New drive lines
5. just found out needs new front axle (or repaired)
6. stereo installed and custom center console built
7. and????

Here's the pics!!!

Chevyman63 · 06-11-2009, 07:51 PM

Very Nice!!

**lks dcvn** · 06-11-2009, 08:28 PM

- looks better than new!

Pop's72 · 06-11-2009, 08:43 PM

Looking good!!

**Yukon Jack** · 06-11-2009, 08:46 PM

Beautiful! Just beautiful!

turp mcspray · 06-11-2009, 09:09 PM

Looks nice! Hard to go wrong with red!

swyfor5 · 06-11-2009, 09:13 PM

Awesome! More pic's please!

teamradrz1 · 06-11-2009, 09:16 PM

Quote:

Originally Posted by swyfor5

Awesome! More pic's please!

Thanks guys, I'll do the brakes tomorrow and I'll take some more pictures

packers05 · 06-11-2009, 09:50 PM

Looks like it has paid off!! I would be real proud

Gillnetter · 06-11-2009, 09:55 PM

Looks Great.Nice work!!

scoyote · 06-11-2009, 11:36 PM

Beautiful!
OK.....
What size tires?
What size lift kit?
What size motor?
What size gears?
Where did you get the hood, it looks like it fits really nice.
Are those factory mirrors?

Just a few questions ;-)

teamradrz1 · 06-12-2009, 12:23 AM

OK.....
What size tires? 35X12.50X16.5
What size lift kit? 4" Suspension 2" body and all new bushings also turned the rear leafs around to move the axles back in the wheel wells which I highly recommend gave me an extra 2" of clearence to the sharp corner of the fender(the 4" lift seems like 4.5-5 cause I replaced a 4" lift and it was higher than before)
What size motor? GM crate 350 300HP
What size gears? 4.56 Gears with Posi-traction
Where did you get the hood, it looks like it fits really nice. GM Goodmark hood
Are those factory mirrors? Yes, not perfect but nice originals not repop

teamradrz1 · 06-12-2009, 12:34 AM

I upgraded the crate engine when I had it out with edelbrock Intake Cam and lifter package, alum roller rockers and gear drives. I have new billet aluminum pullies and mounting brackets for the alt and PS pump that I need to install still.

teamradrz1 · 06-12-2009, 12:41 AM

The large MT Autowerx logos were put on by the guys that did the body and paint, least I could do for the great job they did for the low price they did it for. Traded them time 13 months for getting it done for $3500 anywhere else I went quoted me $5500 up to $8000 and probably would not have done as much work as these guys did for me. So if you are in the Portland area and need body and paint I highly reccomend these guys.

scoyote · 06-12-2009, 10:07 AM

Very nice.
Here is my build:
http://67-72chevytrucks.com/vboard/s...d.php?t=323444

I'm running a 383 stroker with 35" tires and 373 gears through a TH350.

I haven't had it running yet so I'm curious to see how that combo works.

It's not supposed to be an interstate racer ;-)

I put Skyjacker Soft Ride 4" lift on it and trimmed the front fenders a little to prevent rubbing should I ever get it bouncing that hard.

Your build looks great.....very nice blazer.

I plan on running topless....gonna sell my hard top and go for one of those soft tops they are making in Boulder, CO.

Hopefully mine will be running in a week...not on the road but at least running...I wanna hear it run!

And summer is almost here....from what I hear anyway.

**jamie72** · 06-12-2009, 03:17 PM

very nice.. got to love the red blazers...

blazin 70 · 06-12-2009, 08:58 PM

One of these days mabye mine will look that good.Nice job

babyJay · 06-12-2009, 09:01 PM

There ya go using that "D" word.

That is just plain beautiful!

Booya · 06-12-2009, 10:11 PM

That is Sweeeeeeeet!!!!

hotrodhomi · 06-12-2009, 11:54 PM

Looks great. What are your plans for the interior?

vtblazer · 06-13-2009, 06:17 AM

Really really nice, now build a garage for it.

Curious to hear how you like the 4:56/35" tire combo.

teamradrz1 · 06-13-2009, 10:46 AM

Quote:

Originally Posted by vtblazer

Really really nice, now build a garage for it.

Curious to hear how you like the 4:56/35" tire combo.

I know I know 1st I have clean a space in the garage then I'm going to have to buy some small wheel/tire package to get it to fit in the garage.

I like the 35s w/ 4.56 when I buy new wheels and tires might go to 37s. I can burn them off with the 300HP motor and it launches like a bat outta Hell and cruises good at 65MPH wouldn't drive for to long over 70 but then again with the over sized tires I probably am doing 70.

scoyote · 06-13-2009, 11:04 AM

What kind of tranny are you running?

FRENCHBLUE72 · 06-13-2009, 11:09 PM

Very nice.....

70k5pk · 06-13-2009, 11:57 PM

Looks really good. My 1970 K5 is almost ready for outside paint. I put a 350 290hp Jegs Edlebrock and it sounds great. I guess it will last. I only have 28000 miles on vehicle. Of course it is red also. I went with black insides. Can you show some interior pics?

06-11-2009, 07:38 PM	#1
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	BLAZER IS DONE!!! (well sorta) The 71 is finally back at home after a 13 month hiatus at the body shop. It still needs fine tuning and I have lots more small projects for her but she looks great and is driveable and enjoyable again still working on. 1. new PB booster and master cylinder 2. seat belts and rear seat 3. Wheels and Tires 4. New drive lines 5. just found out needs new front axle (or repaired) 6. stereo installed and custom center console built 7. and???? Here's the pics!!! __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4 Last edited by teamradrz1; 06-11-2009 at 07:40 PM.

06-11-2009, 07:51 PM	#2
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: BLAZER IS DONE!!! (well sorta) Very Nice!! __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

06-11-2009, 08:28 PM	#3
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: BLAZER IS DONE!!! (well sorta) - looks better than new!

06-11-2009, 08:43 PM	#4
Pop's72 It's ok to stare... Join Date: Dec 2004 Location: San Jose, CA Posts: 667	Re: BLAZER IS DONE!!! (well sorta) Looking good!! __________________ -Matt 1971 Blazer/Jimmy : Factory 2WD, Factory AC, Crate 350

06-11-2009, 08:46 PM	#5
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: BLAZER IS DONE!!! (well sorta) Beautiful! Just beautiful! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-11-2009, 09:09 PM	#6
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: BLAZER IS DONE!!! (well sorta) Looks nice! Hard to go wrong with red! __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

06-11-2009, 09:13 PM	#7
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: BLAZER IS DONE!!! (well sorta) Awesome! More pic's please!

06-11-2009, 09:50 PM	#9
packers05 Registered User Join Date: Feb 2009 Location: minonk illinois Posts: 224	Re: BLAZER IS DONE!!! (well sorta) Looks like it has paid off!! I would be real proud

06-11-2009, 09:55 PM	#10
Gillnetter Registered User Join Date: Oct 2005 Location: Vancouver B.C. Posts: 286	Re: BLAZER IS DONE!!! (well sorta) Looks Great.Nice work!! __________________ 1972 Blazer CST Dark Olive, am/fm, tilt, tow hooks, tach dash 1972 SWB C-10 Highlander Blue/White 1972 Canadian 2wd Jimmy light olive 1970 SWB 4x4 4 speed 307

06-11-2009, 11:36 PM	#11
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: BLAZER IS DONE!!! (well sorta) Beautiful! OK..... What size tires? What size lift kit? What size motor? What size gears? Where did you get the hood, it looks like it fits really nice. Are those factory mirrors? Just a few questions ;-) __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer. Last edited by scoyote; 06-11-2009 at 11:37 PM.

06-12-2009, 12:23 AM	#12
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	Re: BLAZER IS DONE!!! (well sorta) OK..... What size tires? 35X12.50X16.5 What size lift kit? 4" Suspension 2" body and all new bushings also turned the rear leafs around to move the axles back in the wheel wells which I highly recommend gave me an extra 2" of clearence to the sharp corner of the fender(the 4" lift seems like 4.5-5 cause I replaced a 4" lift and it was higher than before) What size motor? GM crate 350 300HP What size gears? 4.56 Gears with Posi-traction Where did you get the hood, it looks like it fits really nice. GM Goodmark hood Are those factory mirrors? Yes, not perfect but nice originals not repop __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

06-12-2009, 12:34 AM	#13
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	Re: BLAZER IS DONE!!! (well sorta) I upgraded the crate engine when I had it out with edelbrock Intake Cam and lifter package, alum roller rockers and gear drives. I have new billet aluminum pullies and mounting brackets for the alt and PS pump that I need to install still. __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

06-12-2009, 12:41 AM	#14
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	Re: BLAZER IS DONE!!! (well sorta) The large MT Autowerx logos were put on by the guys that did the body and paint, least I could do for the great job they did for the low price they did it for. Traded them time 13 months for getting it done for $3500 anywhere else I went quoted me $5500 up to $8000 and probably would not have done as much work as these guys did for me. So if you are in the Portland area and need body and paint I highly reccomend these guys. __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

06-12-2009, 10:07 AM	#15
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: BLAZER IS DONE!!! (well sorta) Very nice. Here is my build: http://67-72chevytrucks.com/vboard/s...d.php?t=323444 I'm running a 383 stroker with 35" tires and 373 gears through a TH350. I haven't had it running yet so I'm curious to see how that combo works. It's not supposed to be an interstate racer ;-) I put Skyjacker Soft Ride 4" lift on it and trimmed the front fenders a little to prevent rubbing should I ever get it bouncing that hard. Your build looks great.....very nice blazer. I plan on running topless....gonna sell my hard top and go for one of those soft tops they are making in Boulder, CO. Hopefully mine will be running in a week...not on the road but at least running...I wanna hear it run! And summer is almost here....from what I hear anyway. __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer.

06-12-2009, 03:17 PM	#16
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: BLAZER IS DONE!!! (well sorta) very nice.. got to love the red blazers... __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com



Register or Log In To remove these advertisements.

06-12-2009, 08:58 PM	#17
blazin 70 Registered User Join Date: Nov 2008 Location: canton nc Posts: 59	Re: BLAZER IS DONE!!! (well sorta) One of these days mabye mine will look that good.Nice job

06-12-2009, 09:01 PM	#18
babyJay Arrived on a Pale Horse Join Date: Mar 2007 Location: SnagTown Indiana Posts: 2,524	Re: BLAZER IS DONE!!! (well sorta) There ya go using that "D" word. That is just plain beautiful! __________________ Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW

06-12-2009, 10:11 PM	#19
Booya Registered User Join Date: Jun 2008 Location: Boise Idaho Posts: 117	Re: BLAZER IS DONE!!! (well sorta) That is Sweeeeeeeet!!!!

06-12-2009, 11:54 PM	#20
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: BLAZER IS DONE!!! (well sorta) Looks great. What are your plans for the interior? __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

06-13-2009, 06:17 AM	#21
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: BLAZER IS DONE!!! (well sorta) Really really nice, now build a garage for it. Curious to hear how you like the 4:56/35" tire combo.

06-13-2009, 11:04 AM	#23
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: BLAZER IS DONE!!! (well sorta) What kind of tranny are you running? __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer.

06-13-2009, 11:09 PM	#24
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: BLAZER IS DONE!!! (well sorta) Very nice..... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-13-2009, 11:57 PM	#25
70k5pk Registered User Join Date: May 2009 Location: San Antonio, Texas Posts: 68	Re: BLAZER IS DONE!!! (well sorta) Looks really good. My 1970 K5 is almost ready for outside paint. I put a 350 290hp Jegs Edlebrock and it sounds great. I guess it will last. I only have 28000 miles on vehicle. Of course it is red also. I went with black insides. Can you show some interior pics?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.