Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arkracing · 07-16-2009, 09:18 PM

I'll be right up front in saying that the motor, nose, tilt col/wheel are not available (going to me

).

Anyway, pretty much everything else will be up for grabs.

700R4/NP241 with 160k, but HONESTLY was NEVER driven in OD. I got the truck from my friend and I know that he only drove it locally for the past 15 years or so.
SOLD

Front and rear axles - GU6 = 3.42 ratio. The rear end is a G80 = (Posi/Limited Slip)
$250obo for the set - the rear should be worth $200 alone.

6-Lug Rally's - 5 of them (spare). All the trim rings and center caps are there - 4x4 of course. Rear tires are marginal, fronts are junk.
$150 (I got $150 for the last set of 4 and the rims were in worse shape than these.)

Top glass - Tinted. Whatever $40pr

USSkoval · 07-17-2009, 08:46 PM

No shipping at all, or just the big stuff you have listed?

arkracing · 07-18-2009, 07:14 PM

Quote:

Originally Posted by USSkoval

No shipping at all, or just the big stuff you have listed?

Just the big stuff I have listed (mainly I didn't want a request for shipping the wheels)

lester622 · 07-19-2009, 01:47 AM

what shape is the gauge bezel in? also the kick panels are they any good?

USSkoval · 07-19-2009, 01:02 PM

Quote:

Originally Posted by arkracing

Just the big stuff I have listed (mainly I didn't want a request for shipping the wheels)

I could really use the carpet on the rear wheel tubs if you can get them off without ripping them (glued on).

arkracing · 07-19-2009, 04:12 PM

Quote:

Originally Posted by lester622

what shape is the gauge bezel in? also the kick panels are they any good?

Quote:

Originally Posted by USSkoval

I could really use the carpet on the rear wheel tubs if you can get them off without ripping them (glued on).

I'll check on everything tomorrow.

arkracing · 08-03-2009, 09:09 PM

Ok I ripped the rear wheel well carpet trying to get them off. The PO put some screws in the kickpanels so they aren't all that great. Sorry it took so long, I've been dealing with some other issues (ie. my daily driver was stolen

)

low79fx · 08-20-2009, 10:01 PM

Wheels? Still available?

**ScottH** · 08-20-2009, 10:24 PM

Might be interested in hood and front seats depending on condition.
Can u post some pics?

Thanks.

Scott

arkracing · 09-08-2009, 09:22 PM

Quote:

Originally Posted by low79fx

Wheels? Still available?

I still have the wheels - although I'm not sure how I would go about shipping them to TX.

Quote:

Originally Posted by ScottH

Might be interested in hood and front seats depending on condition.
Can u post some pics?
Thanks.
Scott

I'm going to be using the hood as it is pretty much perfect so that is not for sale. The driver seat is pretty beatup/well used/stained etc. I wouldn't waste my time unless you just need them to have them covered.

Sorry guys I guess there isn't too much that is usable on this thing, except the bigger parts.

Is the TBI Harness worth taking out?

ECU PIRATE · 09-09-2009, 07:06 AM

Quote:

Originally Posted by arkracing

I still have the wheels - although I'm not sure how I would go about shipping them to TX.

I'm going to be using the hood as it is pretty much perfect so that is not for sale. The driver seat is pretty beatup/well used/stained etc. I wouldn't waste my time unless you just need them to have them covered.

Sorry guys I guess there isn't too much that is usable on this thing, except the bigger parts.

Is the TBI Harness worth taking out?

What can you do on the front seat belt latches shipping to 20121?

arkracing · 09-10-2009, 09:52 PM

Quote:

Originally Posted by ECU PIRATE

What can you do on the front seat belt latches shipping to 20121?

Just the 2 front latches? I'd sell the entire set cheap if you can use them (assuming I can remove all of them)

ECU PIRATE · 09-11-2009, 07:24 AM

Let me know what price you have in mind. I really only need the (2) front latches but, if you can cut me a deal, I will take the whole front seat belt set (to have some extra).

Thanks,

Mike

low79fx · 09-26-2009, 10:14 AM

Hey Arkracing, Is the spare a rally wheel also? If so would you be willing to sell by itself, if so how much? That is if they are still available.

Sarge261 · 09-26-2009, 01:46 PM

Will the seats and console fit in a pick up with a bench seat? My bench is pretty torn up so I could recover if needed.

Thanks,

Sarge

cjracing15 · 09-27-2009, 03:31 AM

Can you get a pic of the door panels? Thanks.

Spastik Monkey · 10-19-2009, 02:27 AM

Still have this?

I need the latch that locks the rear seat in the up position, the headliner, and the sunvisors.

Sarge261 · 10-20-2009, 08:17 PM

Does anyone know if the seats and console will fit in an 85 k20. And do you still have the seats and console for sale.

Thanks,

Sarge

thirdstreettito · 11-18-2009, 10:08 AM

Manual crank or power tailgate?

87Bob · 11-19-2009, 11:41 AM

Is it an AC Blazer? I am looking for a good gage cluster with the ac vent and the dash molding with vents.

07-16-2009, 09:18 PM	#1
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border I'll be right up front in saying that the motor, nose, tilt col/wheel are not available (going to me). Anyway, pretty much everything else will be up for grabs. 700R4/NP241 with 160k, but HONESTLY was NEVER driven in OD. I got the truck from my friend and I know that he only drove it locally for the past 15 years or so. SOLD Front and rear axles - GU6 = 3.42 ratio. The rear end is a G80 = (Posi/Limited Slip) $250obo for the set - the rear should be worth $200 alone. 6-Lug Rally's - 5 of them (spare). All the trim rings and center caps are there - 4x4 of course. Rear tires are marginal, fronts are junk. $150 (I got $150 for the last set of 4 and the rims were in worse shape than these.) Top glass - Tinted. Whatever $40pr __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered Last edited by arkracing; 11-14-2009 at 11:18 PM.

07-17-2009, 08:46 PM	#2
USSkoval Registered User Join Date: Jul 2009 Location: West Jefferson, OH Posts: 999	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border No shipping at all, or just the big stuff you have listed?

07-19-2009, 01:47 AM	#4
lester622 Registered User Join Date: Jan 2008 Location: New Orleans, La. Posts: 229	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border what shape is the gauge bezel in? also the kick panels are they any good?

08-03-2009, 09:09 PM	#7
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Ok I ripped the rear wheel well carpet trying to get them off. The PO put some screws in the kickpanels so they aren't all that great. Sorry it took so long, I've been dealing with some other issues (ie. my daily driver was stolen ) __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

08-20-2009, 10:01 PM	#8
low79fx Registered User Join Date: Jun 2008 Location: odessa,tx Posts: 208	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Wheels? Still available?

08-20-2009, 10:24 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Might be interested in hood and front seats depending on condition. Can u post some pics? Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-11-2009, 07:24 AM	#13
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Let me know what price you have in mind. I really only need the (2) front latches but, if you can cut me a deal, I will take the whole front seat belt set (to have some extra). Thanks, Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

09-26-2009, 10:14 AM	#14
low79fx Registered User Join Date: Jun 2008 Location: odessa,tx Posts: 208	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Hey Arkracing, Is the spare a rally wheel also? If so would you be willing to sell by itself, if so how much? That is if they are still available.

09-26-2009, 01:46 PM	#15
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Will the seats and console fit in a pick up with a bench seat? My bench is pretty torn up so I could recover if needed. Thanks, Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

09-27-2009, 03:31 AM	#16
cjracing15 Registered User Join Date: Jan 2007 Location: Lexington, TN Posts: 1,427	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Can you get a pic of the door panels? Thanks. __________________ The fleet 94 Chevy 4x4 reg cab 2018 Traverse (wifes car) 1977 SWB stepside 1949 Chevy truck Last edited by cjracing15; 09-27-2009 at 03:10 PM.

10-19-2009, 02:27 AM	#17
Spastik Monkey Registered User Join Date: Oct 2009 Location: Broken Arrow, OK Posts: 7	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Still have this? I need the latch that locks the rear seat in the up position, the headliner, and the sunvisors.

10-20-2009, 08:17 PM	#18
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Does anyone know if the seats and console will fit in an 85 k20. And do you still have the seats and console for sale. Thanks, Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

11-18-2009, 10:08 AM	#19
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Manual crank or power tailgate? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

11-19-2009, 11:41 AM	#20
87Bob Registered User Join Date: Nov 2007 Location: Franklin Indiana Posts: 635	Re: Parting '89 Chevy Blazer 4x4 - Located in RI/CT Border Is it an AC Blazer? I am looking for a good gage cluster with the ac vent and the dash molding with vents. __________________ My Truck's not leaking its marking its territory!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.