What did you get done 8/02/09 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 08-02-2009, 03:33 PM

here it rained today so i got nothing done yesterday was a well deserved day off with the grandkids you all???

AceX · 08-02-2009, 04:03 PM

Just cut up a set of '54 GMC fenders.

Don't worry, they were rusted beyond repair.

I also sold my wrecked 2007 Escalade ESV that I was going to use as a donor car for an engine swap. See, because the car wasn't sold in CA originally it won't pass inspection, which is BS because it is equiped with California legal emissions equipment.

sjreno · 08-02-2009, 04:19 PM

Quote:

Originally Posted by old Rusty C10

here it rained today so i got nothing done yesterday was a well deserved day off with the grandkids you all???

The rain finally stopped here for a bit. Maybe Ill go put my new crome bumper on. BTW old rusty, I see youre from B'klyn. Im originally from Bensonhurst.

S10Fan · 08-02-2009, 04:23 PM

[QUOTE=AceX;3443575]Just cut up a set of '54 GMC fenders.

Don't worry, they were rusted beyond repair.

QUOTE]

Just as long as you didn't cut the dash for an aftermarket radio.

LOL!

Driveway Dreams · 08-02-2009, 04:25 PM

Sprayed all my weeds. Straightened out some hubcaps for my buddies 66. And we are going shopping later for some household things. No truck stuff today though.

ruffrida2005 · 08-02-2009, 04:25 PM

Well I just tried to get over my hangover. gonna clean my trans later.

westie 666 · 08-02-2009, 04:29 PM

Went on a 600 mile road trip, the truck didn't miss a beat, got around 15 mpg

**N2TRUX** · 08-02-2009, 04:38 PM

I personally didn't get much done besides a lot of research. There are several things I am considering as upgrades on my 77 that needed to be looked in to. Still looking for answers there.

On the other hand my buddies Keith and Roger where a blur of progress on my truck. By mid day on Friday they had the front suspension changed out. They moved so quickly, I didn't get a progress report until the wheels were back on.

What you don't see is the stock A-arms have been replaced with a complete set of ART Strong Arms and an ART heavy duty Musclebar kit.

Before and after-

**N2TRUX** · 08-02-2009, 04:42 PM

On Saturday they moved to the rear. The bed came off and tear down began. The frame rails were stripped of the leaf spring hangers in preparation for the ART Airbar 4 link system.

**N2TRUX** · 08-02-2009, 04:48 PM

The front 4 link brackets mounted in the existing holes. The restr of the assembly bolted to the axle. Unfortunately the original C-Notch with boxing plates had to be removed. That required 18 holes to be drilled to install the new C-notch.

JohnC · 08-02-2009, 04:49 PM

No progress on the truck. Had to work this weekend, so nothing exciting here.

Nice progress Ken. Making an amazing truck even better.

**N2TRUX** · 08-02-2009, 04:54 PM

The existing mounting points for the tank rack were saved. The exhaust system will probably need to be modified. The wrong panhard bar bracket was sent with the kit so the panhard bar couldn't be installed to check for clearance.

While I didn't get a lot done Keith and Roger had a very active weekend. Thanks to my buddies for moving forward. Special thanks to Roger at RPL Customs for making room in his very hectic schedule to take this project on.

Blue Gas · 08-02-2009, 05:55 PM

Finally got the motor set in between the rails. Gonna try to get the core support and inner fenders painted this week and have the truck on the road by next weekend. BTW, N2TRUX, I'm in love with your shovelay.

S10Fan · 08-02-2009, 05:58 PM

Busy weekend. Picked up the Heap from a friends body shop at midnight Friday night. My buddy fixed the cab corners and made the roof straight again. I spent Saturday getting the fenders off the bed and repairing cross sills. With the cab corners and roof repaired the cab is pretty much ready for paint. I have the next 2 weeks to get everything else ready for a date with the paint booth on Saturday the 15th.

You guys will have to wait until I'm done for pictures!

Bryan

AceX · 08-02-2009, 05:59 PM

Quote:

Originally Posted by S10Fan

Just as long as you didn't cut the dash for an aftermarket radio.

LOL!

Haha! The dash is fine. I actually took the time to rebuild the original tube radio, so when the truck is done it will be functional. I'll probably never use it, but thats beside the point.

I plan to do a secret audio system int he truck using all modern, top end components, but it will never be seen.

Right now I'm saving up money to finally finish the truck. I have a friend who may agree to do the body work for real cheap, then once I get some color on it, I'll be out driving it.

BLE 'BURBAN · 08-02-2009, 06:46 PM

Went to the local SHOW & SHINE CAR SHOW down on the Park Strip today.In the process of downloading pics as we speak. Will post a link to it in the GENERAL FORUMS section when they're all up loaded Took close to 200 pics

S10Fan · 08-02-2009, 06:55 PM

I forgot to throw out a big thank you to BigBlock73 for selling a quality product, the 6X9 speaker panels. Another thanks to Captain K for quick shipping on a pair of the custom door panels. Spent a few bucks with some other board vendors too. I'd better pay off my credit card before the wife opens a statement envelope. LOL.

**RPOZ11** · 08-02-2009, 07:03 PM

I had to start my list for my 454 rebuild for my 73 C/20.

There goes my savings!!!!

bigblock73 · 08-02-2009, 07:18 PM

Quote:

Originally Posted by S10Fan

I forgot to throw out a big thank you to BigBlock73 for selling a quality product, the 6X9 speaker panels.

Thanks Bryan, glad you are happy with them.

Can't wait to see new truck pics!

Justins76 · 08-02-2009, 07:23 PM

I checked all my fluid levels.

AirMale · 08-02-2009, 07:40 PM

Quote:

Originally Posted by bigblock73

Thanks Bryan, glad you are happy with them.

Can't wait to see new truck pics!

Got mine too! NICE PRODUCT. Thanks!

bigblock73 · 08-02-2009, 07:47 PM

Quote:

Originally Posted by AirMale

Got mine too! NICE PRODUCT. Thanks!

Thanks, glad you like them too.

truckincurt · 08-02-2009, 08:26 PM

torque converter **** the bed thursday get to put the 700r4 in now whoot whoot

thump16 · 08-02-2009, 08:52 PM

Pulled everything off of the garage walls in preparation of paint. Don't know which color yet but I am leaning towards something bright.

81shortstep · 08-02-2009, 10:30 PM

went and picked up the new to me 454 engine

Name: 454.jpg
Views: 200
Size: 52.2 KB

this winter i should be rebuilding and painting it and hopefully be dropping it in next summer

08-02-2009, 03:33 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	What did you get done 8/02/09 edition here it rained today so i got nothing done yesterday was a well deserved day off with the grandkids you all??? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-02-2009, 04:03 PM	#2
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: What did you get done 8/02/09 edition Just cut up a set of '54 GMC fenders. Don't worry, they were rusted beyond repair. I also sold my wrecked 2007 Escalade ESV that I was going to use as a donor car for an engine swap. See, because the car wasn't sold in CA originally it won't pass inspection, which is BS because it is equiped with California legal emissions equipment. __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

08-02-2009, 04:23 PM	#4
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: What did you get done 8/02/09 edition [QUOTE=AceX;3443575]Just cut up a set of '54 GMC fenders. Don't worry, they were rusted beyond repair. QUOTE] Just as long as you didn't cut the dash for an aftermarket radio. LOL! __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F*d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver. Last edited by S10Fan; 08-02-2009 at 04:23 PM.*

08-02-2009, 04:25 PM	#5
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: What did you get done 8/02/09 edition Sprayed all my weeds. Straightened out some hubcaps for my buddies 66. And we are going shopping later for some household things. No truck stuff today though. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

08-02-2009, 04:25 PM	#6
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: What did you get done 8/02/09 edition Well I just tried to get over my hangover. gonna clean my trans later. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

08-02-2009, 04:29 PM	#7
westie 666 Registered User Join Date: Mar 2008 Location: AUCKLAND NZ Posts: 264	Re: What did you get done 8/02/09 edition Went on a 600 mile road trip, the truck didn't miss a beat, got around 15 mpg __________________ 77 Cheyenne no longer in bits

08-02-2009, 04:38 PM	#8
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What did you get done 8/02/09 edition I personally didn't get much done besides a lot of research. There are several things I am considering as upgrades on my 77 that needed to be looked in to. Still looking for answers there. On the other hand my buddies Keith and Roger where a blur of progress on my truck. By mid day on Friday they had the front suspension changed out. They moved so quickly, I didn't get a progress report until the wheels were back on. What you don't see is the stock A-arms have been replaced with a complete set of ART Strong Arms and an ART heavy duty Musclebar kit. Before and after- Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 08-02-2009 at 04:43 PM.

08-02-2009, 04:42 PM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What did you get done 8/02/09 edition On Saturday they moved to the rear. The bed came off and tear down began. The frame rails were stripped of the leaf spring hangers in preparation for the ART Airbar 4 link system. Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-02-2009, 04:48 PM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What did you get done 8/02/09 edition The front 4 link brackets mounted in the existing holes. The restr of the assembly bolted to the axle. Unfortunately the original C-Notch with boxing plates had to be removed. That required 18 holes to be drilled to install the new C-notch. Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-02-2009, 04:49 PM	#11
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: What did you get done 8/02/09 edition No progress on the truck. Had to work this weekend, so nothing exciting here. Nice progress Ken. Making an amazing truck even better.

08-02-2009, 04:54 PM	#12
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What did you get done 8/02/09 edition The existing mounting points for the tank rack were saved. The exhaust system will probably need to be modified. The wrong panhard bar bracket was sent with the kit so the panhard bar couldn't be installed to check for clearance. While I didn't get a lot done Keith and Roger had a very active weekend. Thanks to my buddies for moving forward. Special thanks to Roger at RPL Customs for making room in his very hectic schedule to take this project on. Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-02-2009, 05:55 PM	#13
Blue Gas Registered User Join Date: Apr 2009 Location: Waycross Ga Posts: 16	Re: What did you get done 8/02/09 edition Finally got the motor set in between the rails. Gonna try to get the core support and inner fenders painted this week and have the truck on the road by next weekend. BTW, N2TRUX, I'm in love with your shovelay. __________________ 1952 3100 5-window, work in progress 1985 C10, 454/th400

08-02-2009, 05:58 PM	#14
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: What did you get done 8/02/09 edition Busy weekend. Picked up the Heap from a friends body shop at midnight Friday night. My buddy fixed the cab corners and made the roof straight again. I spent Saturday getting the fenders off the bed and repairing cross sills. With the cab corners and roof repaired the cab is pretty much ready for paint. I have the next 2 weeks to get everything else ready for a date with the paint booth on Saturday the 15th. You guys will have to wait until I'm done for pictures! Bryan __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

08-02-2009, 06:46 PM	#16
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: What did you get done 8/02/09 edition Went to the local SHOW & SHINE CAR SHOW down on the Park Strip today.In the process of downloading pics as we speak. Will post a link to it in the GENERAL FORUMS section when they're all up loaded Took close to 200 pics __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

08-02-2009, 06:55 PM	#17
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: What did you get done 8/02/09 edition I forgot to throw out a big thank you to BigBlock73 for selling a quality product, the 6X9 speaker panels. Another thanks to Captain K for quick shipping on a pair of the custom door panels. Spent a few bucks with some other board vendors too. I'd better pay off my credit card before the wife opens a statement envelope. LOL. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.



Register or Log In To remove these advertisements.

08-02-2009, 07:03 PM	#18
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: What did you get done 8/02/09 edition I had to start my list for my 454 rebuild for my 73 C/20. There goes my savings!!!! __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

08-02-2009, 07:23 PM	#20
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Re: What did you get done 8/02/09 edition I checked all my fluid levels. __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!

08-02-2009, 08:26 PM	#23
truckincurt Registered User Join Date: Mar 2008 Location: Lockport, NY Posts: 106	Re: What did you get done 8/02/09 edition torque converter **** the bed thursday get to put the 700r4 in now whoot whoot __________________ diy or die

08-02-2009, 08:52 PM	#24
thump16 Registered User Join Date: Jul 2005 Location: Valdosta GA Posts: 708	Re: What did you get done 8/02/09 edition Pulled everything off of the garage walls in preparation of paint. Don't know which color yet but I am leaning towards something bright.

08-02-2009, 10:30 PM	#25
81shortstep Registered User Join Date: Feb 2007 Location: saskatoon,canada Posts: 51	Re: What did you get done 8/02/09 edition went and picked up the new to me 454 engine this winter i should be rebuilding and painting it and hopefully be dropping it in next summer __________________ 81 gmc short box stepside(rebuild in progress) 09 mitsubishi lancer gt

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.