|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-03-2009, 10:33 AM
|
#1 |
|
Damn Yankee
Join Date: Feb 2007
Location: Lynchburg, VA
Posts: 2,261
|
1962 Suburban rear bumper
Is the 62 Suburban rear bumper actually a front?
|
|
|
|
09-03-2009, 11:26 AM
|
#2 |
|
Shloooooong bed member #2
Join Date: Aug 2008
Location: Millington Tn.
Posts: 1,864
|
Re: 1962 Suburban rear bumper
They look to be real close. I think the rear actually wraps around a little bit further. But I think the bracket mounting holes are same.
The stlye for both is the same. the rear does not have the cut out for the licence plate.
__________________
David, Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q |
|
|
|
|
09-03-2009, 12:10 PM
|
#3 | |
|
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: 1962 Suburban rear bumper
Quote:
just measure the distance between the frames front and rear and it will give you the diference ron |
|
|
|
|
|
09-04-2009, 12:12 AM
|
#4 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 1962 Suburban rear bumper
Other than the hole spacing they are the same. Keep in mind though that the front bumper hole spacing is different between the '60-'62's and the '63-'66's. As for the rear bumper hole spacing I would have to verify if they are different in those same year groups.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
09-04-2009, 12:54 PM
|
#5 |
|
Registered User
Join Date: Nov 2008
Location: Crosby, Texas
Posts: 377
|
Re: 1962 Suburban rear bumper
On building my 66 Burb I found the rear bumper bracket and holes are different from the front. Therefore I am looking for a rear bumper to finish my 66.
|
|
|
|
|
09-05-2009, 12:06 AM
|
#6 |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 1962 Suburban rear bumper
I measured my '60 GMC 4x4 Suburban frame at the rear and it is wider than a '63-'66 Suburban/Panel frame at the rear. So it appears that the '60-'62 Suburban/Panel rear bumper hole spacing is different than for the '63-'66's.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
