Removing a 1960-63 C60 dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddpile · 09-07-2009, 11:56 PM

Well, I finally found a double-hump dash. It's in a C60 grain truck that's rusted beyond repair on the floor and rockers. My question is, how easy does it come out, and what is the best tool for the job? Thanks! Pics would be great!

63sbssbbw · 09-08-2009, 02:35 AM

I think there's a couple of bolts on each side, but primarily spot welded along the pinch weld at the windshield
A spot weld cutter and some tapping fluid should get the job done
Trent
ps any chance the windshield is still good(ok you can stop laughing now)
LOL

muddpile · 09-08-2009, 08:42 PM

Haven't actually seen the truck yet, it's out at a friends farm, but I'll check and let ya know. So to drill the pinch welds, if memory serves me correct, I remove the windshield and they're in there?

chevytrucknut61 · 09-08-2009, 10:50 PM

I replaced mine, yes when you remove the windshield you will see most of them. Just don't force it you can mess the dash up.Pain in the a$$ but you can change it with out not too much trouble. I used the spot welder from the eastwood company. Good luck!

09-07-2009, 11:56 PM	#1
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Removing a 1960-63 C60 dash Well, I finally found a double-hump dash. It's in a C60 grain truck that's rusted beyond repair on the floor and rockers. My question is, how easy does it come out, and what is the best tool for the job? Thanks! Pics would be great! __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

09-08-2009, 02:35 AM	#2
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: Removing a 1960-63 C60 dash I think there's a couple of bolts on each side, but primarily spot welded along the pinch weld at the windshield A spot weld cutter and some tapping fluid should get the job done Trent ps any chance the windshield is still good(ok you can stop laughing now) LOL __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)

09-08-2009, 08:42 PM	#3
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Removing a 1960-63 C60 dash Haven't actually seen the truck yet, it's out at a friends farm, but I'll check and let ya know. So to drill the pinch welds, if memory serves me correct, I remove the windshield and they're in there? __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

09-08-2009, 10:50 PM	#4
chevytrucknut61 Registered User Join Date: Mar 2004 Location: Wichita Ks. Posts: 130	Re: Removing a 1960-63 C60 dash I replaced mine, yes when you remove the windshield you will see most of them. Just don't force it you can mess the dash up.Pain in the a$$ but you can change it with out not too much trouble. I used the spot welder from the eastwood company. Good luck!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.