22's all away around - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fat Mike · 11-27-2009, 02:40 PM

Has anybody ran 22's all away around on a s-10 frame swap for a 47 gmc truck?

72hotrodder · 11-27-2009, 03:15 PM

be honest done think the fenders are tall enuff if you want to lay out also

SkullCandy · 11-27-2009, 08:06 PM

this truck has 20 inch steelies

http://www.gmfullsize.com/forum/showthread.php?t=64109

50adrod · 11-28-2009, 12:30 AM

Quote:

Originally Posted by SkullCandy

this truck has 20 inch steelies

http://www.gmfullsize.com/forum/showthread.php?t=64109

Cajundragger's truck

Fat Mike · 12-01-2009, 02:24 PM

I was asking because Texas56 and kdog are running 22's in the rear and he said he had plenty of rrom so I wanted to see if anyone has also put them on the front.

cajundragger · 12-01-2009, 11:25 PM

yes it can be done. my truck will lay 22's. but I wont run them because they are just to damn big in the front. Too tall, to where the radius of the wheel is much larger than the radius of the front fender so that you'd have to lift the fender about 3-4 inches over the wheel to have proper clearance. My 20x8's with a 255/35 tire is what I'd basically consider the limit. You could also fit a 245/40 or maybe a little bigger, but I wouldnt. Its just be a pain to drive.

**Dan in Pasadena** · 12-02-2009, 12:32 AM

Quote:

Originally Posted by Fat Mike

...all away around...

Is that anything like "French benefits"?

Just pulling your leg.

texas56 · 12-07-2009, 04:11 PM

ya I ran a 20x8.5 on the front with a 255/35/20 tire and seems to steer pretty good.When I had the stock brakes and Control arms on mine you had alot more turn at very low ride height due to the wheels being in a little more. Im hoping to have mine painted and in final assembly in the next couple weeks so I can shoot you some pics if you want.

texas56 · 12-07-2009, 04:13 PM

Oh forgot to add, as far as the rears go, the 22 will fit but I also added a narrowed 9 inch ford to get the wider wheel and the 305 tire on it. I also have a 40 series tire on the rear. Seems like I tried a buddies 265/35/22 on a 22x10 on mine when I had the stock rear in it and it fit, Was a little tight real low but It went I think.

**youngrodder** · 12-07-2009, 10:06 PM

Quote:

Originally Posted by texas56

ya I ran a 20x8.5 on the front with a 255/35/20 tire and seems to steer pretty good.When I had the stock brakes and Control arms on mine you had alot more turn at very low ride height due to the wheels being in a little more. Im hoping to have mine painted and in final assembly in the next couple weeks so I can shoot you some pics if you want.

What color is your truck going to be? Anything close to your avatar?

texas56 · 12-08-2009, 11:12 AM

Actually it was going to be that color scheme but now going a different route. Its going to be a Flat Burnt orange.

kdog3121 · 12-08-2009, 05:12 PM

texas56... you got any updated pics? haven't seen anything in a while... i'm getting my camera back soon, i'm gonna post some pics of the frame & six link soon.. sorry to hijack fatmike

texas56 · 12-08-2009, 06:43 PM

I have been trying to post some but it keeps saying I have to get a Admin to let me or something. Not sure what deal is. Its getting farther along little by little. Been block sanding in the evenings and the weekends and it takes forever!

kdog3121 · 12-08-2009, 09:21 PM

come on admins!!!

that truck is sweet we need to see some progress!!!

11-27-2009, 02:40 PM	#1
Fat Mike Registered User Join Date: Sep 2009 Location: Albuquerque, NM Posts: 540	22's all away around Has anybody ran 22's all away around on a s-10 frame swap for a 47 gmc truck?

11-27-2009, 03:15 PM	#2
72hotrodder THE TOY STORE Join Date: Nov 2008 Location: florence al Posts: 227	Re: 22's all away around be honest done think the fenders are tall enuff if you want to lay out also __________________ having a badass truck and not driving it is like having a playboy model as a wife and not..... well you know.

11-27-2009, 08:06 PM	#3
SkullCandy Registered User Join Date: May 2008 Location: Ontario, Canada Posts: 81	Re: 22's all away around this truck has 20 inch steelies http://www.gmfullsize.com/forum/showthread.php?t=64109 Attached Images __________________ 1990 Dodge Ram D250 Cummins Last edited by SkullCandy; 11-27-2009 at 08:07 PM.

12-01-2009, 02:24 PM	#5
Fat Mike Registered User Join Date: Sep 2009 Location: Albuquerque, NM Posts: 540	Re: 22's all away around I was asking because Texas56 and kdog are running 22's in the rear and he said he had plenty of rrom so I wanted to see if anyone has also put them on the front.

12-01-2009, 11:25 PM	#6
cajundragger Registered User Join Date: Aug 2006 Location: louisiana Posts: 1,008	Re: 22's all away around yes it can be done. my truck will lay 22's. but I wont run them because they are just to damn big in the front. Too tall, to where the radius of the wheel is much larger than the radius of the front fender so that you'd have to lift the fender about 3-4 inches over the wheel to have proper clearance. My 20x8's with a 255/35 tire is what I'd basically consider the limit. You could also fit a 245/40 or maybe a little bigger, but I wouldnt. Its just be a pain to drive.

12-07-2009, 04:11 PM	#8
texas56 Registered User Join Date: Jun 2009 Location: Dickinson Texas Posts: 286	Re: 22's all away around ya I ran a 20x8.5 on the front with a 255/35/20 tire and seems to steer pretty good.When I had the stock brakes and Control arms on mine you had alot more turn at very low ride height due to the wheels being in a little more. Im hoping to have mine painted and in final assembly in the next couple weeks so I can shoot you some pics if you want. __________________ 1955 First Series Thriftmaster Blown 355 TH400, S10 Chassis,narrowed 9 Inch rear, air ride, 4 wheel disc brakes, 20s and 22s,

12-07-2009, 04:13 PM	#9
texas56 Registered User Join Date: Jun 2009 Location: Dickinson Texas Posts: 286	Re: 22's all away around Oh forgot to add, as far as the rears go, the 22 will fit but I also added a narrowed 9 inch ford to get the wider wheel and the 305 tire on it. I also have a 40 series tire on the rear. Seems like I tried a buddies 265/35/22 on a 22x10 on mine when I had the stock rear in it and it fit, Was a little tight real low but It went I think. __________________ 1955 First Series Thriftmaster Blown 355 TH400, S10 Chassis,narrowed 9 Inch rear, air ride, 4 wheel disc brakes, 20s and 22s,

12-08-2009, 11:12 AM	#11
texas56 Registered User Join Date: Jun 2009 Location: Dickinson Texas Posts: 286	Re: 22's all away around Actually it was going to be that color scheme but now going a different route. Its going to be a Flat Burnt orange. __________________ 1955 First Series Thriftmaster Blown 355 TH400, S10 Chassis,narrowed 9 Inch rear, air ride, 4 wheel disc brakes, 20s and 22s,

12-08-2009, 05:12 PM	#12
kdog3121 Registered User Join Date: Mar 2009 Location: weymouth, MA Posts: 66	Re: 22's all away around texas56... you got any updated pics? haven't seen anything in a while... i'm getting my camera back soon, i'm gonna post some pics of the frame & six link soon.. sorry to hijack fatmike

12-08-2009, 06:43 PM	#13
texas56 Registered User Join Date: Jun 2009 Location: Dickinson Texas Posts: 286	Re: 22's all away around I have been trying to post some but it keeps saying I have to get a Admin to let me or something. Not sure what deal is. Its getting farther along little by little. Been block sanding in the evenings and the weekends and it takes forever! __________________ 1955 First Series Thriftmaster Blown 355 TH400, S10 Chassis,narrowed 9 Inch rear, air ride, 4 wheel disc brakes, 20s and 22s,

12-08-2009, 09:21 PM	#14
kdog3121 Registered User Join Date: Mar 2009 Location: weymouth, MA Posts: 66	Re: 22's all away around come on admins!!! that truck is sweet we need to see some progress!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.