information? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

keenan · 01-13-2010, 03:09 PM

can anyone give me a site or something that can show me every piece of equipment my truck came with? like what type of rear end mine came with, ratio, size engine originally things like that.

red71c10 · 01-13-2010, 04:44 PM

does your truck still have the SPID on the inside of the glove box door? That's about the only way you can find out about what was specific to your truck unless you get lucky and find a build sheet in the seat.

**mr48chev** · 01-13-2010, 04:54 PM

If it doesn't have the SPID look in the seat springs or in above the heater/glovebox for a copy of the build sheet. That is the printouts of the sheets they used to build the truck at the factory. Someone else might give the exact location of the sheets as they are almost always stuck in the same spots.

keenan · 01-14-2010, 11:28 AM

I beleive the seat someone had used from another vehicle because the mounts look like theyve been welded poorly mite i add. where in the glove box? how many numbers is the SPID normally?

PT'S 70 CST · 01-14-2010, 12:03 PM

This is what you are after.

PT

01-13-2010, 03:09 PM	#1
keenan Registered User Join Date: Jul 2009 Location: hebron, ohio Posts: 91	information? can anyone give me a site or something that can show me every piece of equipment my truck came with? like what type of rear end mine came with, ratio, size engine originally things like that.

01-13-2010, 04:44 PM	#2
red71c10 The Red Menace Join Date: Feb 2009 Location: Roseburg, OR Posts: 577	Re: information? does your truck still have the SPID on the inside of the glove box door? That's about the only way you can find out about what was specific to your truck unless you get lucky and find a build sheet in the seat. __________________ 1971 Custom 10 - 350/350TH - Pwr steering, gauges, Chrome front bumper, Chrome hubcaps, Door edge guards, HD rear springs (current) 1968 C-20 Custom Camper - 350/350TH (orig 327), Pwr steering & brakes, gauges w/tach (former) 1968 C-20 - 307/3sp column (Dad's when I was a kid) "Driving is like coloring. Things get messy if you can't stay inside the lines."

01-13-2010, 04:54 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,744	Re: information? If it doesn't have the SPID look in the seat springs or in above the heater/glovebox for a copy of the build sheet. That is the printouts of the sheets they used to build the truck at the factory. Someone else might give the exact location of the sheets as they are almost always stuck in the same spots.

01-14-2010, 11:28 AM	#4
keenan Registered User Join Date: Jul 2009 Location: hebron, ohio Posts: 91	Re: information? I beleive the seat someone had used from another vehicle because the mounts look like theyve been welded poorly mite i add. where in the glove box? how many numbers is the SPID normally?

01-14-2010, 12:03 PM	#5
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: information? This is what you are after. PT Attached Images __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.