lowering 1967 gmc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RandyL1966 · 01-24-2010, 10:59 PM

what is a flip kit?
is there a link ?

Rollie396 · 01-24-2010, 11:27 PM

A flip kit mounts the rear axle on top of the spring pack instead of underneath on a leaf spring vehicle.A quick search should get you all the detail you need.

Spray-Bomb · 01-25-2010, 03:21 PM

Here is a link to my old thread, see if that helps you any

http://67-72chevytrucks.com/vboard/s...d.php?t=252447

RandyL1966 · 01-25-2010, 11:37 PM

OK I DID THE FLIP
AXLE IS ON TOP OF SPRINGS IT DROOPED 9 INCHES
WELL THATS A LITTLE TO LOW FOR ME WILL AIR SHOCKS GIVE ME ABOUT THREE INCH LIFT AND A DECENT RIDE
OR SHOULD I GO WITH BIGGER LEAF SRINGS
SHACKLES DIDN'T GO LOW ENOUGH AND THE FLIP WENT TO LOW

**N2TRUX** · 01-25-2010, 11:48 PM

It sounds like your rear springs are too soft or maybe some leaves have been removed.

You do not want to use airshocks to raise it back up. They will give a very rough ride.

Spray-Bomb · 01-26-2010, 01:55 PM

Did you use your stock shackles or your drop shackles when you flipped it ???

RandyL1966 · 01-26-2010, 08:03 PM

stock shackles

01-24-2010, 10:59 PM	#1
RandyL1966 Registered User Join Date: Jan 2010 Location: Harper Texas Posts: 208	lowering 1967 gmc what is a flip kit? is there a link ?

01-24-2010, 11:27 PM	#2
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	Re: lowering 1967 gmc A flip kit mounts the rear axle on top of the spring pack instead of underneath on a leaf spring vehicle.A quick search should get you all the detail you need. __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

01-25-2010, 03:21 PM	#3
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: lowering 1967 gmc Here is a link to my old thread, see if that helps you any http://67-72chevytrucks.com/vboard/s...d.php?t=252447 __________________ Just not low enough... ----------------------------- Sinister Killer

01-25-2010, 11:37 PM	#4
RandyL1966 Registered User Join Date: Jan 2010 Location: Harper Texas Posts: 208	Re: lowering 1967 gmc OK I DID THE FLIP AXLE IS ON TOP OF SPRINGS IT DROOPED 9 INCHES WELL THATS A LITTLE TO LOW FOR ME WILL AIR SHOCKS GIVE ME ABOUT THREE INCH LIFT AND A DECENT RIDE OR SHOULD I GO WITH BIGGER LEAF SRINGS SHACKLES DIDN'T GO LOW ENOUGH AND THE FLIP WENT TO LOW

01-25-2010, 11:48 PM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: lowering 1967 gmc It sounds like your rear springs are too soft or maybe some leaves have been removed. You do not want to use airshocks to raise it back up. They will give a very rough ride. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-26-2010, 01:55 PM	#6
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: lowering 1967 gmc Did you use your stock shackles or your drop shackles when you flipped it ??? __________________ Just not low enough... ----------------------------- Sinister Killer

01-26-2010, 08:03 PM	#7
RandyL1966 Registered User Join Date: Jan 2010 Location: Harper Texas Posts: 208	Re: lowering 1967 gmc stock shackles

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.