I'm Stumped..... No power to dome light - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orneryolbiker · 01-24-2010, 11:41 PM

I have a 91 burb v1500, it is loaded, has power mirrors and rear air with heat and factory remote start, I don't have power to my dome lights, lighter or power mirrors, yes I checked the fuses. I am fairly knowledgeable on these trucks, but this has me stumped. Any help would be appreciated.....

FLEET72 · 01-25-2010, 10:07 AM

Dome lights are supplied by this orange wire.

And is supplied by this outlet in the fuse box upper left hand side. and the white wire goes to the door pin switches and headlight switch.

The cigarette lighter is also supplied by the same circuit on previous year models but I don't have a wiring diagram yet so I cannot prove it is so on the later models. In my 95 model wiring diagram it shows all three of your problems coming from the "HORN/DM" fuse. So, if you have power at that fuse then you will need to follow the power flow and find where it stops.

Daggar · 01-25-2010, 06:52 PM

I can only say I fixed mine sucessfully and the vanity lights using my Service Manual... So I hope this helps

Straight out of my 91 Manual

The following images are Copyright 1990 General Motors Corporation and have been posted for Research purposes only

orneryolbiker · 01-25-2010, 07:51 PM

Thanks guys, the diagram that shows the convenience center location is what I was hoping to find. Thanks again

orneryolbiker · 01-25-2010, 07:52 PM

Great pictures, thanks for your time and info.

01-24-2010, 11:41 PM	#1
orneryolbiker Registered User Join Date: Oct 2003 Location: sin city nevada Posts: 51	I'm Stumped..... No power to dome light I have a 91 burb v1500, it is loaded, has power mirrors and rear air with heat and factory remote start, I don't have power to my dome lights, lighter or power mirrors, yes I checked the fuses. I am fairly knowledgeable on these trucks, but this has me stumped. Any help would be appreciated..... Last edited by orneryolbiker; 01-24-2010 at 11:41 PM.

01-25-2010, 10:07 AM	#2
FLEET72 Registered User Join Date: Jan 2007 Location: Sonoma, CA Posts: 521	Re: I'm Stumped..... No power to dome light Dome lights are supplied by this orange wire. And is supplied by this outlet in the fuse box upper left hand side. and the white wire goes to the door pin switches and headlight switch. The cigarette lighter is also supplied by the same circuit on previous year models but I don't have a wiring diagram yet so I cannot prove it is so on the later models. In my 95 model wiring diagram it shows all three of your problems coming from the "HORN/DM" fuse. So, if you have power at that fuse then you will need to follow the power flow and find where it stops. __________________ Oscar '72 Shortbed Fleetside '95 Jimmy 4X4 '69 GMC Custom Camper

01-25-2010, 06:52 PM	#3
Daggar Registered User Join Date: May 2007 Location: Calgary, Alberta, Canada Posts: 42	Re: I'm Stumped..... No power to dome light I can only say I fixed mine sucessfully and the vanity lights using my Service Manual... So I hope this helps Straight out of my 91 Manual The following images are Copyright 1990 General Motors Corporation and have been posted for Research purposes only Attached Images __________________ 1999 Chevrolet Suburban 2500 4x4 - 454, 4L80E and lots of other fun options 1967 Chevrolet C10 Longbox Stepside - Restored 1991 Chevrolet Suburban 2500 4x4 - 350, 4L80E - Not dead but severly crippled 1987 GMC Suburban 1500 - Now some retired guy's trailer hauler 1992 Lumina Z34 - I'll miss that PITA Last edited by Daggar; 01-25-2010 at 06:52 PM.

01-25-2010, 07:51 PM	#4
orneryolbiker Registered User Join Date: Oct 2003 Location: sin city nevada Posts: 51	Re: I'm Stumped..... No power to dome light Thanks guys, the diagram that shows the convenience center location is what I was hoping to find. Thanks again

01-25-2010, 07:52 PM	#5
orneryolbiker Registered User Join Date: Oct 2003 Location: sin city nevada Posts: 51	Re: I'm Stumped..... No power to dome light Great pictures, thanks for your time and info.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.