OR Parting 67 Short Step Bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JRBECK64 · 01-28-2010, 01:20 PM

Fenders are true 67 Stepside fenders no marker lights. Bedsides have had the rear rounded where the bed ends on top (Normally a open circle at the end). New Front for bed. New bed rails. New Angle Iron for bedsides. New rear cross support for bed. Tail gate in good shape. Steps in great shape. Price list below.

Fenders- $200 per side. SOLD
Bed sides- $150 per side.
Steps- $40 per side. SOLD
Front of bed (NEW STILL IN BOX)- $100
Rear Cross Support- $40 SOLD
Red Oak Bed Kit (Still in Box)- $200 SOLD
Bed Rails and Angle Iron- $50 SOLD
Tail Gate- $75

If you need pictures let me know and I will post them.

tuddend · 01-28-2010, 01:26 PM

can you post some pictures?

kohler · 01-28-2010, 01:47 PM

interested in steps and fenders pending pics

JRBECK64 · 01-28-2010, 03:11 PM

Pictures will be posted within the hour.

Sammy · 01-28-2010, 03:19 PM

Interested in bed kit. What does it include? Any strips?(bed rails) Pics please.

dave666693 · 01-28-2010, 03:46 PM

interested in the rear cross sill/support--shipping to 98001?

JRBECK64 · 01-28-2010, 04:15 PM

Quote:

Originally Posted by dave666693

interested in the rear cross sill/support--shipping to 98001?

JRBECK64 · 01-28-2010, 04:19 PM

Quote:

Originally Posted by Sammy

Interested in bed kit. What does it include? Any strips?(bed rails) Pics please.

The bed kit has the rails and the angle irons for each side of the bedsides. I cant find the fastner kit I had for it. The wood is top notch Red Oak. Let me know if you want it. I will have to figure out shipping.

JRBECK64

JRBECK64 · 01-28-2010, 04:20 PM

Quote:

Originally Posted by dave666693

interested in the rear cross sill/support--shipping to 98001?

Its brand new and I will have to get back with you on the shipping cost.

JRBECK64

JRBECK64 · 01-28-2010, 04:23 PM

Quote:

Originally Posted by kohler

interested in steps and fenders pending pics

Its really hard to take pictures of these fenders because of reflections. It doesn't do them justice. There is no rust in these fenders and they need a minimal amount of bodywork to make them 100%. Are you just wanting the sheetmetal on the steps or do you want the supports also?

Let me know if your interested.

JRBECK64

JRBECK64 · 01-28-2010, 04:25 PM

Quote:

Originally Posted by tuddend

can you post some pictures?

Pictures posted, if you need some other pictures let me know.

JRBECK64

JRBECK64 · 01-28-2010, 04:39 PM

Quote:

Originally Posted by kohler

interested in steps and fenders pending pics

I had my son take a couple more pics due to large amounts of dust on the fenders. Here are some close ups of the areas that looked like there might be rust when it was actually dust from doing bodywork on my Sons 1964 Chevy ShortWide. Just want to make sure to portray what I actually have.

Sammy · 01-28-2010, 04:43 PM

Yes, check shipping to 63628 residence and give me a total. Who made these?

JRBECK64 · 01-28-2010, 05:19 PM

Quote:

Originally Posted by Sammy

Yes, check shipping to 63628 residence and give me a total. Who made these?

Sammy,
I cant remember but the company was out of Tennesse. I remember hearing about the company here on this website and I bought it from them so they are a vendor here on this website. Unfortunatly I cant find the paperwork.
I will get on checking the shipping on these. So do you want the bedrails and the angle iron also?

JRBECK64

JRBECK64 · 01-28-2010, 06:57 PM

Quote:

Originally Posted by dave666693

interested in the rear cross sill/support--shipping to 98001?

$25 to ship it. Give me a PM if you still want it.

JRBECK64

Sammy · 01-28-2010, 08:18 PM

Good deals on this stuff. But truck shipping causes me to pass. ..Next

dave666693 · 01-28-2010, 09:54 PM

pm sent

Quote:

Originally Posted by JRBECK64

$25 to ship it. Give me a PM if you still want it.

JRBECK64

OARNGESI · 01-28-2010, 10:17 PM

Red Oak Bed Kit (Still in Box)- $200 DO THESE COME WITH STRIPS OR HARDWARE EITHER CAN YOU CHECK SHIPPING TO 85122

kohler · 01-28-2010, 11:26 PM

this will most likely kill this but what would be the shipping to 12401 on the fenders can ship to a bussiness or there is a bus depot in the same zip

Duncan and son · 01-29-2010, 12:46 AM

Bump for nice bed

JRBECK64 · 01-29-2010, 01:05 AM

Quote:

Originally Posted by kohler

this will most likely kill this but what would be the shipping to 12401 on the fenders can ship to a bussiness or there is a bus depot in the same zip

I will look and see where the nearest bus depot is and give them a call to see what they will charge me. I have heard that its $60 per fender. Did you also want the steps and the brakets for them? If the shipping is $120 I would probably be willing to throw in the Steps to sweeten the deal but I will look into this first and get back with you tomorrow.

JRBECK64

JRBECK64 · 01-29-2010, 01:31 AM

Quote:

Originally Posted by JRBECK64

I will look and see where the nearest bus depot is and give them a call to see what they will charge me. I have heard that its $60 per fender. Did you also want the steps and the brakets for them? If the shipping is $120 I would probably be willing to throw in the Steps to sweeten the deal but I will look into this first and get back with you tomorrow.

JRBECK64

Best I can guess from the estimate I put in was $62.50 per Fender. How close is Albany to you? If that is to far from you please give me some of your surrounding areas but Im sure the cost wont go up much.

JRBECK64

kohler · 01-29-2010, 10:20 AM

there is a bus depot in my town kingston,12401 albany is about an hour away
also is there any filler in these and is the flange that bolts to the bed in real good shape
thanks chris

JRBECK64 · 01-29-2010, 12:29 PM

Quote:

Originally Posted by kohler

there is a bus depot in my town kingston,12401 albany is about an hour away
also is there any filler in these and is the flange that bolts to the bed in real good shape
thanks chris

The paint on these are ruff enough that if there was filler I would know about it. There is definitly 3 layers of paint on them and peeling in some areas. The flanges are in great shape, no rust. If I were going to use these fenders I would probably get them soda blasted and go from there but From what I see there is no rust in these anywhere. The fenders are not perfect (MINOR DINGS) but I would say that your not going to find a better set on a bed thats 43 years old and hasn't been restored. Let me know what you want to do. If Albany is only an hour from you then Im sure the shipping wont be any more than what I quoted. The quote included $300 of Insurance per package in case they get damaged. I plan on putting a couple of strips of one by across the length of the wheel wells and bolt them into the mounting holes to stiffen them that way they wont be flexing all the way across the Country. Let me know what you want to do.
JRBECK64

JRBECK64 · 01-29-2010, 08:40 PM

Quote:

Originally Posted by Duncan and son

Bump for nice bed

Thanks for the Compliment.
JRBECK64

01-28-2010, 01:20 PM	#1
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Parting 67 Short Step Bed Fenders are true 67 Stepside fenders no marker lights. Bedsides have had the rear rounded where the bed ends on top (Normally a open circle at the end). New Front for bed. New bed rails. New Angle Iron for bedsides. New rear cross support for bed. Tail gate in good shape. Steps in great shape. Price list below. Fenders- $200 per side. SOLD Bed sides- $150 per side. Steps- $40 per side. SOLD Front of bed (NEW STILL IN BOX)- $100 Rear Cross Support- $40 SOLD Red Oak Bed Kit (Still in Box)- $200 SOLD Bed Rails and Angle Iron- $50 SOLD Tail Gate- $75 If you need pictures let me know and I will post them. Last edited by JRBECK64; 01-30-2010 at 05:16 PM.

01-28-2010, 01:26 PM	#2
tuddend Registered User Join Date: Jul 2006 Location: Grimsby, Ontario, Canada Posts: 12	Re: Parting 67 Short Step Bed can you post some pictures?

01-28-2010, 01:47 PM	#3
kohler Registered User Join Date: Jan 2006 Location: new york,ulster Posts: 63	Re: Parting 67 Short Step Bed interested in steps and fenders pending pics

01-28-2010, 03:11 PM	#4
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: Parting 67 Short Step Bed Pictures will be posted within the hour.

01-28-2010, 03:19 PM	#5
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Parting 67 Short Step Bed Interested in bed kit. What does it include? Any strips?(bed rails) Pics please. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

01-28-2010, 03:46 PM	#6
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: Parting 67 Short Step Bed interested in the rear cross sill/support--shipping to 98001? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

01-28-2010, 04:43 PM	#13
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Parting 67 Short Step Bed Yes, check shipping to 63628 residence and give me a total. Who made these? __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

01-28-2010, 08:18 PM	#16
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Parting 67 Short Step Bed Good deals on this stuff. But truck shipping causes me to pass. ..Next __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

01-28-2010, 10:17 PM	#18
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Parting 67 Short Step Bed Red Oak Bed Kit (Still in Box)- $200 DO THESE COME WITH STRIPS OR HARDWARE EITHER CAN YOU CHECK SHIPPING TO 85122 __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

01-28-2010, 11:26 PM	#19
kohler Registered User Join Date: Jan 2006 Location: new york,ulster Posts: 63	Re: Parting 67 Short Step Bed this will most likely kill this but what would be the shipping to 12401 on the fenders can ship to a bussiness or there is a bus depot in the same zip

01-29-2010, 12:46 AM	#20
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: Parting 67 Short Step Bed Bump for nice bed __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

01-29-2010, 10:20 AM	#23
kohler Registered User Join Date: Jan 2006 Location: new york,ulster Posts: 63	Re: Parting 67 Short Step Bed there is a bus depot in my town kingston,12401 albany is about an hour away also is there any filler in these and is the flange that bolts to the bed in real good shape thanks chris

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.