rear window swap

[low86c10]

how do i remove the rear sliding window?

[old Rusty C10]

if your rear window is like mine there was a strip in the center of the rubber gasket. First I pulled that out real careful not to pull too hard to break it. Then from inside the cab i started at the top drivers side and using two medium flat head screwdrivers i pulled the edge of the gasket down and held it with one screwdriver, then i slowly went about aninch away and did the same again and applied pressure to the window pushing it out... went another inch or so and did it again etc and it started to slowly push away once i got enough done you can just carefully push it out and then climb in the bed and pull it totally out.... if youre not using the gasket over you can just cut the rubber gasket inside and pop it out that way