CA 1/2" or 1" Drop Blocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Leviticus · 03-02-2010, 12:17 AM

Hey Guys,

I have (4) 1/2" drop blocks that I had made to stack on my 2" blocks and decided not to install due to my scrub line being too close with them on top of my 2".

If you stack em on both sides you will get 1" drop, or if you are braver than me you can stack em on top of your 2" blocks, although I don't recommend it. Or they make a great paper weight

They are drilled to fit our U bolts, and are 7" long to match the welded on axle seat. I'd like $10 plus shipping, or trade for some window felts for a 72 C10, or ?

They are raw steel, ready to paint or powder coat. You can make em yourself pretty easily as well, Tx Firefighter did a great writeup on em. Make me an offer, I'd like to see them used instead of kicked around my shop floor.

HuggerCST · 03-02-2010, 12:45 AM

I'll take them. I'm at 71227.

Leviticus · 03-02-2010, 12:55 AM

Ok, sold to HuggerCST, that was quick. PM me your address, I'll see if I can stuff them in the smaller Priority mail box which would only be $4.95 I think. If I have to go to a bigger priority box I think its $8.00 somthing. I might be able to go parcel post cheaper.

I'll let you know tomorrow.

Thanks, glad you can use em.

03-02-2010, 12:17 AM	#1
Leviticus Shake and Bake! Join Date: Feb 2010 Location: Central Coast, CA Posts: 609	1/2" or 1" Drop Blocks Hey Guys, I have (4) 1/2" drop blocks that I had made to stack on my 2" blocks and decided not to install due to my scrub line being too close with them on top of my 2". If you stack em on both sides you will get 1" drop, or if you are braver than me you can stack em on top of your 2" blocks, although I don't recommend it. Or they make a great paper weight They are drilled to fit our U bolts, and are 7" long to match the welded on axle seat. I'd like $10 plus shipping, or trade for some window felts for a 72 C10, or ? They are raw steel, ready to paint or powder coat. You can make em yourself pretty easily as well, Tx Firefighter did a great writeup on em. Make me an offer, I'd like to see them used instead of kicked around my shop floor. __________________ "All tyranny needs to gain a foothold is for people of good conscience to remain silent." Thomas Jefferson "You are remembered for the rules you break." General Douglas MacArthur "Support Our Troops And The NRA" Last edited by Leviticus; 03-02-2010 at 12:20 AM. Reason: forgot pics

03-02-2010, 12:45 AM	#2
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: 1/2" or 1" Drop Blocks I'll take them. I'm at 71227. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-02-2010, 12:55 AM	#3
Leviticus Shake and Bake! Join Date: Feb 2010 Location: Central Coast, CA Posts: 609	Re: 1/2" or 1" Drop Blocks Ok, sold to HuggerCST, that was quick. PM me your address, I'll see if I can stuff them in the smaller Priority mail box which would only be $4.95 I think. If I have to go to a bigger priority box I think its $8.00 somthing. I might be able to go parcel post cheaper. I'll let you know tomorrow. Thanks, glad you can use em. __________________ "All tyranny needs to gain a foothold is for people of good conscience to remain silent." Thomas Jefferson "You are remembered for the rules you break." General Douglas MacArthur "Support Our Troops And The NRA"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.