292 offset mount. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aerotruk63** · 03-22-2010, 08:36 PM

I bought a rotten bodied 64 Chevrolet K10 ( X tractor pull ) that had a 327 Corvette engine in it ( not part of the deal). Then I purchased a 1963 Chevrolet C60 with a 292. I'm using the cab off the 63 to put on the K10 frame and I want to use the 292 running motor. 28,000 miles on it. Truck hasn't made it here yet. Never had a 292 before, never seen the offset mount till I starting searching on this site.

Now, are the mounts the same on a C60 as they are on a C10 or K10?

Is there a difference between the C10 and K10 mounts?

Does anyone have a picture of the 292 offset mount either C10 or preferably K10?

03-22-2010, 08:36 PM	#1
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	292 offset mount. I bought a rotten bodied 64 Chevrolet K10 ( X tractor pull ) that had a 327 Corvette engine in it ( not part of the deal). Then I purchased a 1963 Chevrolet C60 with a 292. I'm using the cab off the 63 to put on the K10 frame and I want to use the 292 running motor. 28,000 miles on it. Truck hasn't made it here yet. Never had a 292 before, never seen the offset mount till I starting searching on this site. Now, are the mounts the same on a C60 as they are on a C10 or K10? Is there a difference between the C10 and K10 mounts? Does anyone have a picture of the 292 offset mount either C10 or preferably K10? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.