Anyone parting out a 93 or newer full size truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Old Chevy Lover · 02-07-2003, 12:25 AM

I am needing the Vehicle Speed Sensor Buffer (DRAC). It is a small white box that is located behind the glovebox, and controls the calibration of the speedometer. I am looking for one out of a truck with 3.42 gears or maybe 3.08 gears.

69c10stepside · 02-10-2003, 10:09 PM

I can get you one.. have a 93 model extended cab that i brought home for a project a while back, it was a 4.3 5 speed pickup from factory, but i wouldnt have any idea on what the gear ratio was, as i only bought the cab.. i switched the dash out of my 90 model, so anything there that you might need let me know. Give me a price and we will go from there. Frank

Old Chevy Lover · 02-10-2003, 10:38 PM

hmm.. it would probably have to be out of another 5.7 truck in order to be the ratio that I need

**crossy** · 02-11-2003, 12:57 AM

since you did get the cab look on the inside bottom of the glove box for the option RPO codes( white label) anything starting with a 'G' pertains to the axles in one way or another. you'll probably see a GU? or GT? GU6 is 3.42 I believe. the 350 engine has nothing to do with it . a 1/2 ton is going to have either a 2.73, 3.08,3.42 or 3.73 . DAVE

Old Chevy Lover · 02-11-2003, 01:12 AM

your right.. engine wouldn't have anything to do with it.. but wouldn't the fact that it was a 5 speed make it different?

jimmy johnson · 02-11-2003, 05:09 PM

no trans shouldnt matter as long as gear ratio is the same.

02-07-2003, 12:25 AM	#1
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	Anyone parting out a 93 or newer full size truck? I am needing the Vehicle Speed Sensor Buffer (DRAC). It is a small white box that is located behind the glovebox, and controls the calibration of the speedometer. I am looking for one out of a truck with 3.42 gears or maybe 3.08 gears. __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

02-10-2003, 10:09 PM	#2
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	I can get you one.. have a 93 model extended cab that i brought home for a project a while back, it was a 4.3 5 speed pickup from factory, but i wouldnt have any idea on what the gear ratio was, as i only bought the cab.. i switched the dash out of my 90 model, so anything there that you might need let me know. Give me a price and we will go from there. Frank __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold

02-10-2003, 10:38 PM	#3
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	hmm.. it would probably have to be out of another 5.7 truck in order to be the ratio that I need __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

02-11-2003, 12:57 AM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	since you did get the cab look on the inside bottom of the glove box for the option RPO codes( white label) anything starting with a 'G' pertains to the axles in one way or another. you'll probably see a GU? or GT? GU6 is 3.42 I believe. the 350 engine has nothing to do with it . a 1/2 ton is going to have either a 2.73, 3.08,3.42 or 3.73 . DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

02-11-2003, 01:12 AM	#5
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	your right.. engine wouldn't have anything to do with it.. but wouldn't the fact that it was a 5 speed make it different? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

02-11-2003, 05:09 PM	#6
jimmy johnson Registered User Join Date: Feb 2003 Location: cloverdale In Posts: 25	no trans shouldnt matter as long as gear ratio is the same.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.