|
07-05-2010, 11:36 AM
|
#1 |
|
Registered User
Join Date: Dec 2008
Location: Fall River Mills, California
Posts: 1
|
Dash swap 67-72
I want to swap the dash cluster in 2 of my trucks. They are both idiot light dashes, one with RH wiper control and one with LH. If I get a complete dashes, will the changes be simple? I am mostly concerned about plug in connections and the moving of the wiper control. Is this a problem? I know about the sender changes, so that's not an issue.
Any veterans on this? Terry |
|
|
|
07-05-2010, 01:51 PM
|
#2 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,679
|
Re: Dash swap 67-72
Moving the wiper control knob is not much of an issue, BUT when you go to the guage dash there will be some wiring you will have to move around in the connector to avoid shorting. One of the vendors has a chart on which wires to move (can't seem to find it at the moment)
|
|
|
|
|
07-05-2010, 02:10 PM
|
#3 |
|
member #16
 
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: Dash swap 67-72
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors  http://www.flickr.com/photos/1745471...7602865984234/ Last edited by john; 07-05-2010 at 02:11 PM. |
|
|
|
|
07-05-2010, 04:42 PM
|
#4 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: Dash swap 67-72
link can also be found in the FAQ thread i did up on the electrcal forum. This is far from plug and play, if you try, then the fuel guage will go up in smoke and nothing else will work properlu either.
TRUST ME ON THIS! |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
