Which oil pan for 72 GMC 2wd? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevydog66 · 07-27-2010, 02:08 PM

I have a 72 GMC truck and am in the midst of rounding up parts for to install a 6.0 LQ4 that came from a 01 Chevy truck. What oil pan will fit mine? I have seen that some guys have to change to the Caddy CST V pan.

**LEEVON** · 07-27-2010, 02:12 PM

I'm using an f-body pan just for extra ground clearance.

MONTEZ · 07-27-2010, 02:21 PM

Quote:

Originally Posted by chevydog66

I have a 72 GMC truck and am in the midst of rounding up parts for to install a 6.0 LQ4 that came from a 01 Chevy truck. What oil pan will fit mine? I have seen that some guys have to change to the Caddy CST V pan.

MAST motorpsorts has one coming out in a few weeks that will fit darn near any application, pretty much universal.

Ackattack · 07-27-2010, 02:24 PM

I used an F-body pan for mine.

the truck pan will work, but hangs down below the crossmember.

Jim_PA · 07-27-2010, 02:40 PM

The truck pan hangs down less than an inch with the ECE mounts.

glock35ipsc · 07-27-2010, 02:49 PM

GM part number 19212593, universal oil pan kit, fits all Gen III and IV engines (not a direct fit for the LS7, LSA, and LS9) and includes the oil pan, gasket, indicator tube and indicator, pickup tube and crankshaft oil deflector.

$120.96.

chevydog66 · 07-27-2010, 03:52 PM

I already have the ECE motor mounts and plan on using them, I also have air ride and my front crossmember is only 2" above ground aired out. Thanks guys!!!!

chevydog66 · 07-28-2010, 09:49 AM

If I change to a F body pan will the p/u tube also need to be changed?

Ackattack · 07-28-2010, 10:20 AM

Quote:

Originally Posted by chevydog66

If I change to a F body pan will the p/u tube also need to be changed?

yes, and windage tray, and dipstick.

BACKYARD88 · 07-28-2010, 02:44 PM

Quote:

Originally Posted by glock35ipsc

gm part number 19212593, universal oil pan kit, fits all gen iii and iv engines (not a direct fit for the ls7, lsa, and ls9) and includes the oil pan, gasket, indicator tube and indicator, pickup tube and crankshaft oil deflector.

$120.96.

+1

chevydog66 · 07-28-2010, 02:47 PM

cool thanks backyard88.

chevydog66 · 07-29-2010, 02:12 PM

Quote:

Originally Posted by BACKYARD88

+1

Does this come with the oil cooler block off plate? Are you guys running an oil cooler? Is it needed?

Jim_PA · 07-29-2010, 04:42 PM

Don't know if it comes with a block-off or not, but I put a corvette style adapter on there, and tapped it for a mechanical oil pressure gauge.

BACKYARD88 · 07-30-2010, 02:29 PM

Mine came with the block off plate already on the pan. I don't see a need for an oil cooler on my application.

68 c10 ls2 · 07-30-2010, 06:08 PM

I dont know the part number but its called the "LS SWAP OIL PAN" you can get it from Jegs, Summit or GM. It come with evey thing you need. Bolts, gasket, p/u tube and it does have a bolted on block off plate for the oil cooler. You shouldnt need an oil cooler unless your towing, or have a superchager/turbo on your motor. I also have the ECE motor mounts and it may hang 1/4" below the cross member but thats where the drain plug is. This pan is off an 08 Hummer H3. So thats the oil filter you need to ask for when you go to change your oil.

glock35ipsc · 07-30-2010, 08:25 PM

Quote:

Originally Posted by 68 c10 ls2

I dont know the part number but its called the "LS SWAP OIL PAN" you can get it from Jegs, Summit or GM. It come with evey thing you need. Bolts, gasket, p/u tube and it does have a bolted on block off plate for the oil cooler. This pan is off an 08 Hummer H3. So thats the oil filter you need to ask for when you go to change your oil.

As posted above in post #6.

Quote:

Originally Posted by glock35ipsc

GM part number 19212593, universal oil pan kit, fits all Gen III and IV engines (not a direct fit for the LS7, LSA, and LS9) and includes the oil pan, gasket, indicator tube and indicator, pickup tube and crankshaft oil deflector.

$120.96.

chevydog66 · 08-01-2010, 10:31 PM

Yep, I ordered the GM 19212593 from www.gmpartsdirect.com the other day. It has shipped, so hope to have it Tuesday.

chevydog66 · 08-01-2010, 10:35 PM

Quote:

Originally Posted by Jim_PA

Don't know if it comes with a block-off or not, but I put a corvette style adapter on there, and tapped it for a mechanical oil pressure gauge.

I assume that it's pretty accurate being that it is placed there? So, you are not using the electric gauge?

chevydog66 · 08-04-2010, 09:39 PM

Quote:

Originally Posted by glock35ipsc

GM part number 19212593, universal oil pan kit, fits all Gen III and IV engines (not a direct fit for the LS7, LSA, and LS9) and includes the oil pan, gasket, indicator tube and indicator, pickup tube and crankshaft oil deflector.

$120.96.

So what oil filter fits this pan? I already purchased a filter to fit the old pan. 01 6.0 LQ4 filter doesnt fit this pan. Another trip to the parts store with pan in hand.

glock35ipsc · 08-04-2010, 09:49 PM

Quote:

Originally Posted by chevydog66

So what oil filter fits this pan? I already purchased a filter to fit the old pan. 01 6.0 LQ4 filter doesnt fit this pan. Another trip to the parts store with pan in hand.

ACDelco PF-48

Jim_PA · 08-04-2010, 09:56 PM

Quote:

Originally Posted by chevydog66

I assume that it's pretty accurate being that it is placed there? So, you are not using the electric gauge?

I have the sender hooked up to the PCM (not that it's needed...), but am using a mechanical gauge for the cab. I don't see why it wouldn't be accurate in that spot.

chevydog66 · 08-04-2010, 09:58 PM

Quote:

Originally Posted by glock35ipsc

ACDelco PF-48

Thanks Glock!! You are a Gentleman and a Scholar.

**Hart_Rod** · 08-24-2010, 08:08 PM

Quote:

Originally Posted by chevydog66

So what oil filter fits this pan? I already purchased a filter to fit the old pan. 01 6.0 LQ4 filter doesnt fit this pan. Another trip to the parts store with pan in hand.

You could always take the fitting out of your old pan and install it in the new pan. I did that on mine so I can always get parts that fit the truck (tahoe) that my motor came out of.

R/

07-27-2010, 02:08 PM	#1
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Which oil pan for 72 GMC 2wd? I have a 72 GMC truck and am in the midst of rounding up parts for to install a 6.0 LQ4 that came from a 01 Chevy truck. What oil pan will fit mine? I have seen that some guys have to change to the Caddy CST V pan. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

07-27-2010, 02:12 PM	#2
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: Which oil pan for 72 GMC 2wd? I'm using an f-body pan just for extra ground clearance. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

07-27-2010, 02:24 PM	#4
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	Re: Which oil pan for 72 GMC 2wd? I used an F-body pan for mine. the truck pan will work, but hangs down below the crossmember. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

07-27-2010, 02:40 PM	#5
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Which oil pan for 72 GMC 2wd? The truck pan hangs down less than an inch with the ECE mounts.

07-27-2010, 03:52 PM	#7
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: Which oil pan for 72 GMC 2wd? I already have the ECE motor mounts and plan on using them, I also have air ride and my front crossmember is only 2" above ground aired out. Thanks guys!!!! __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

07-27-2010, 02:49 PM	#6
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Which oil pan for 72 GMC 2wd? GM part number 19212593, universal oil pan kit, fits all Gen III and IV engines (not a direct fit for the LS7, LSA, and LS9) and includes the oil pan, gasket, indicator tube and indicator, pickup tube and crankshaft oil deflector. $120.96. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 07-27-2010 at 02:52 PM.

07-28-2010, 09:49 AM	#8
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: Which oil pan for 72 GMC 2wd? If I change to a F body pan will the p/u tube also need to be changed? __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

07-28-2010, 02:47 PM	#11
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: Which oil pan for 72 GMC 2wd? cool thanks backyard88. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

07-29-2010, 04:42 PM	#13
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Which oil pan for 72 GMC 2wd? Don't know if it comes with a block-off or not, but I put a corvette style adapter on there, and tapped it for a mechanical oil pressure gauge.

07-30-2010, 02:29 PM	#14
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Which oil pan for 72 GMC 2wd? Mine came with the block off plate already on the pan. I don't see a need for an oil cooler on my application. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

07-30-2010, 06:08 PM	#15
68 c10 ls2 Registered User Join Date: Mar 2010 Location: Minnesota Posts: 157	Re: Which oil pan for 72 GMC 2wd? I dont know the part number but its called the "LS SWAP OIL PAN" you can get it from Jegs, Summit or GM. It come with evey thing you need. Bolts, gasket, p/u tube and it does have a bolted on block off plate for the oil cooler. You shouldnt need an oil cooler unless your towing, or have a superchager/turbo on your motor. I also have the ECE motor mounts and it may hang 1/4" below the cross member but thats where the drain plug is. This pan is off an 08 Hummer H3. So thats the oil filter you need to ask for when you go to change your oil.

08-01-2010, 10:31 PM	#17
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: Which oil pan for 72 GMC 2wd? Yep, I ordered the GM 19212593 from www.gmpartsdirect.com the other day. It has shipped, so hope to have it Tuesday. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.