PCM is mounted! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jim_PA · 08-04-2010, 12:53 AM

It's about the best I could do! --

I need some kind of support bar to keep it from moving up and down, but other than that, its solid!

68GMCCustom · 08-04-2010, 01:05 AM

you got the little plastic cover with it too....nice!

Jim_PA · 08-04-2010, 01:12 AM

The cover and bracket was about $25 -- they must be one of those things that get wacked a lot in collisions, so they are pretty readily available (and cheap)

chevydog66 · 08-08-2010, 01:46 AM

Quote:

Originally Posted by Jim_PA

The cover and bracket was about $25 -- they must be one of those things that get wacked a lot in collisions, so they are pretty readily available (and cheap)

What year is your motor? I have a 01 6.0 LQ4. Wanting to know if my pcm would fit in that cover? Got a GM part for cover and bracket?

Jim_PA · 08-08-2010, 09:12 AM

All the pcm's I've ever seen were the same shape and size
These are the numbers

15071609
15047570

**Hart_Rod** · 08-24-2010, 08:02 PM

Quote:

Originally Posted by Jim_PA

All the pcm's I've ever seen were the same shape and size
These are the numbers

15071609
15047570

Where did you pick up the bracket at? I called a local salvage yard and they wouldn't sell me one and all of our pick n pulls don't have them either. Thanks,

r

chevydog66 · 08-24-2010, 11:57 PM

I have mine mounted also with the part #'s that Jim_PA listed. I bought them from a local GM parts seller, Midwest Auto parts.

68GMCCustom · 08-25-2010, 12:00 AM

Jim's been away...but will pick up soon.....hopefully.

**Hart_Rod** · 08-25-2010, 09:46 AM

Quote:

Originally Posted by chevydog66

I have mine mounted also with the part #'s that Jim_PA listed. I bought them from a local GM parts seller, Midwest Auto parts.

Called and ordered them today. Thanks!

67C10BUB · 09-24-2010, 11:32 PM

Quote:

Originally Posted by Jim_PA

All the pcm's I've ever seen were the same shape and size
These are the numbers

15071609
15047570

Do you know if these will also fit the gen 4 5.3L?

08-04-2010, 12:53 AM	#1
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	PCM is mounted! It's about the best I could do! -- I need some kind of support bar to keep it from moving up and down, but other than that, its solid! Attached Images Last edited by Jim_PA; 08-04-2010 at 12:53 AM.

08-04-2010, 01:05 AM	#2
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: PCM is mounted! you got the little plastic cover with it too....nice! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

08-04-2010, 01:12 AM	#3
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: PCM is mounted! The cover and bracket was about $25 -- they must be one of those things that get wacked a lot in collisions, so they are pretty readily available (and cheap)

08-08-2010, 09:12 AM	#5
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: PCM is mounted! All the pcm's I've ever seen were the same shape and size These are the numbers 15071609 15047570

08-24-2010, 11:57 PM	#7
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: PCM is mounted! I have mine mounted also with the part #'s that Jim_PA listed. I bought them from a local GM parts seller, Midwest Auto parts. Attached Images __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

08-25-2010, 12:00 AM	#8
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: PCM is mounted! Jim's been away...but will pick up soon.....hopefully. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.